[PATCH v2 19/22] objtool: Support repeated uses of the same C jump table

From: Josh Poimboeuf
Date: Wed Jul 17 2019 - 21:37:41 EST


From: Jann Horn <jannh@xxxxxxxxxx>

This fixes objtool for both a GCC issue and a Clang issue:

1) GCC issue:

kernel/bpf/core.o: warning: objtool: ___bpf_prog_run()+0x8d5: sibling call from callable instruction with modified stack frame

With CONFIG_RETPOLINE=n, GCC is doing the following optimization in
___bpf_prog_run().

Before:

select_insn:
jmp *jumptable(,%rax,8)
...
ALU64_ADD_X:
...
jmp select_insn
ALU_ADD_X:
...
jmp select_insn

After:

select_insn:
jmp *jumptable(, %rax, 8)
...
ALU64_ADD_X:
...
jmp *jumptable(, %rax, 8)
ALU_ADD_X:
...
jmp *jumptable(, %rax, 8)

This confuses objtool. It has never seen multiple indirect jump
sites which use the same jump table.

For GCC switch tables, the only way of detecting the size of a table
is by continuing to scan for more tables. The size of the previous
table can only be determined after another switch table is found, or
when the scan reaches the end of the function.

That logic was reused for C jump tables, and was based on the
assumption that each jump table only has a single jump site. The
above optimization breaks that assumption.

2) Clang issue:

drivers/usb/misc/sisusbvga/sisusb.o: warning: objtool: sisusb_write_mem_bulk()+0x588: can't find switch jump table

With clang 9, code can be generated where a function contains two
indirect jump instructions which use the same switch table.

The fix is the same for both issues: split the jump table parsing into
two passes.

In the first pass, locate the heads of all switch tables for the
function and mark their locations.

In the second pass, parse the switch tables and add them.

Fixes: e55a73251da3 ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Jann Horn <jannh@xxxxxxxxxx>
Co-developed-by: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Signed-off-by: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Acked-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
Tested-by: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
---
tools/objtool/check.c | 53 +++++++++++++++++++++++--------------------
tools/objtool/check.h | 1 +
tools/objtool/elf.h | 1 +
3 files changed, 30 insertions(+), 25 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index a904f98236b4..a64bb54abd29 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -900,7 +900,7 @@ static int add_special_section_alts(struct objtool_file *file)
}

static int add_jump_table(struct objtool_file *file, struct instruction *insn,
- struct rela *table, struct rela *next_table)
+ struct rela *table)
{
struct rela *rela = table;
struct instruction *dest_insn;
@@ -913,7 +913,9 @@ static int add_jump_table(struct objtool_file *file, struct instruction *insn,
* instruction.
*/
list_for_each_entry_from(rela, &table->sec->rela_list, list) {
- if (rela == next_table)
+
+ /* Check for the end of the table: */
+ if (rela != table && rela->jump_table_start)
break;

/* Make sure the table entries are consecutive: */
@@ -1072,13 +1074,15 @@ static struct rela *find_jump_table(struct objtool_file *file,
return NULL;
}

-
-static int add_func_jump_tables(struct objtool_file *file,
- struct symbol *func)
+/*
+ * First pass: Mark the head of each jump table so that in the next pass,
+ * we know when a given jump table ends and the next one starts.
+ */
+static void mark_func_jump_tables(struct objtool_file *file,
+ struct symbol *func)
{
- struct instruction *insn, *last = NULL, *prev_jump = NULL;
- struct rela *rela, *prev_rela = NULL;
- int ret;
+ struct instruction *insn, *last = NULL;
+ struct rela *rela;

func_for_each_insn_all(file, func, insn) {
if (!last)
@@ -1102,26 +1106,24 @@ static int add_func_jump_tables(struct objtool_file *file,
continue;

rela = find_jump_table(file, func, insn);
- if (!rela)
- continue;
-
- /*
- * We found a jump table, but we don't know yet how big it
- * is. Don't add it until we reach the end of the function or
- * the beginning of another jump table in the same function.
- */
- if (prev_jump) {
- ret = add_jump_table(file, prev_jump, prev_rela, rela);
- if (ret)
- return ret;
+ if (rela) {
+ rela->jump_table_start = true;
+ insn->jump_table = rela;
}
-
- prev_jump = insn;
- prev_rela = rela;
}
+}
+
+static int add_func_jump_tables(struct objtool_file *file,
+ struct symbol *func)
+{
+ struct instruction *insn;
+ int ret;
+
+ func_for_each_insn_all(file, func, insn) {
+ if (!insn->jump_table)
+ continue;

- if (prev_jump) {
- ret = add_jump_table(file, prev_jump, prev_rela, NULL);
+ ret = add_jump_table(file, insn, insn->jump_table);
if (ret)
return ret;
}
@@ -1148,6 +1150,7 @@ static int add_jump_table_alts(struct objtool_file *file)
if (func->type != STT_FUNC)
continue;

+ mark_func_jump_tables(file, func);
ret = add_func_jump_tables(file, func);
if (ret)
return ret;
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index cb60b9acf5cf..afa6a79e0715 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -38,6 +38,7 @@ struct instruction {
struct symbol *call_dest;
struct instruction *jump_dest;
struct instruction *first_jump_src;
+ struct rela *jump_table;
struct list_head alts;
struct symbol *func;
struct stack_op stack_op;
diff --git a/tools/objtool/elf.h b/tools/objtool/elf.h
index 1b638de4e7c0..14e7d4c3aff1 100644
--- a/tools/objtool/elf.h
+++ b/tools/objtool/elf.h
@@ -62,6 +62,7 @@ struct rela {
unsigned int type;
unsigned long offset;
int addend;
+ bool jump_table_start;
};

struct elf {
--
2.20.1