[PATCH v2 5/5] mtd: spi-nor: add Kconfig option to disable write protection at power-up

From: Tudor.Ambarus
Date: Wed Jul 17 2019 - 07:31:10 EST


From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>

Some spi-nor flashes come write protected by default after a
power-on sequence to avoid destructing commands (erase, write)
during power-up.

Backward compatibility imposes to disable the write protection
at power-up by default. Add a Kconfig option to let the user
benefit of the power-up write protection.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
v2: mark spi_nor_spansion_clear_sr_bp() and
spi_nor_unlock_global_block_protection() definitions as __maybe_unused,
to avoid -Wunused-function warnings when
MTD_SPI_NOR_DISABLE_POWER_UP_WRITE_PROTECTION is not selected.

drivers/mtd/spi-nor/Kconfig | 8 ++++++++
drivers/mtd/spi-nor/spi-nor.c | 7 +++++--
2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 6de83277ce8b..b550e10657f1 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -22,6 +22,14 @@ config MTD_SPI_NOR_USE_4K_SECTORS
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).

+config MTD_SPI_NOR_DISABLE_POWER_UP_WRITE_PROTECTION
+ bool "Disable write protection during power-up"
+ default y
+ help
+ Some spi-nor flashes are write protected by default after a power-on
+ reset cycle, in order to avoid inadvertend writes during power-up.
+ Disable the write protection during power-up.
+
config SPI_ASPEED_SMC
tristate "Aspeed flash controllers in SPI mode"
depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index ffb53740031c..9b948295ef27 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1684,7 +1684,7 @@ static int spi_nor_clear_sr_bp(struct spi_nor *nor)
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
+static int __maybe_unused spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
{
int ret;
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
@@ -1726,7 +1726,8 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
return spi_nor_clear_sr_bp(nor);
}

-static int spi_nor_unlock_global_block_protection(struct spi_nor *nor)
+static int __maybe_unused
+spi_nor_unlock_global_block_protection(struct spi_nor *nor)
{
int ret;

@@ -4049,6 +4050,7 @@ static int spi_nor_init(struct spi_nor *nor)
{
int err;

+#ifdef CONFIG_MTD_SPI_NOR_DISABLE_POWER_UP_WRITE_PROTECTION
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set.
@@ -4082,6 +4084,7 @@ static int spi_nor_init(struct spi_nor *nor)
return err;
}
}
+#endif

if (nor->quad_enable) {
err = nor->quad_enable(nor);
--
2.9.5