Re: [linux-sunxi] Re: [PATCH v10 04/11] drm/sun4i: tcon: Compute DCLK dividers based on format, lanes

From: Jagan Teki
Date: Mon Jul 01 2019 - 15:00:29 EST


On Tue, Jun 25, 2019 at 8:07 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Mon, Jun 24, 2019 at 09:32:11PM +0530, Jagan Teki wrote:
> > On Mon, Jun 24, 2019 at 6:34 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > >
> > > On Fri, Jun 14, 2019 at 05:33:23PM +0530, Jagan Teki wrote:
> > > > On Thu, Jun 13, 2019 at 7:28 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > > > >
> > > > > On Wed, Jun 05, 2019 at 01:11:44PM +0530, Jagan Teki wrote:
> > > > > > On Tue, Jun 4, 2019 at 8:00 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > > > > > >
> > > > > > > On Fri, May 24, 2019 at 03:37:36PM +0530, Jagan Teki wrote:
> > > > > > > > On Fri, May 24, 2019 at 2:18 AM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
> > > > > > > > >
> > > > > > > > > On Mon, May 20, 2019 at 02:33:11PM +0530, Jagan Teki wrote:
> > > > > > > > > > pll-video => pll-mipi => tcon0 => tcon0-pixel-clock is the typical
> > > > > > > > > > MIPI clock topology in Allwinner DSI controller.
> > > > > > > > > >
> > > > > > > > > > TCON dotclock driver is computing the desired DCLK divider based on
> > > > > > > > > > panel pixel clock along with input DCLK min, max divider values from
> > > > > > > > > > tcon driver and that would eventually set the pll-mipi clock rate.
> > > > > > > > > >
> > > > > > > > > > The current code is passing dsi min and max divider value as 4 via
> > > > > > > > > > tcon driver which would ended-up triggering below vblank wait timed out
> > > > > > > > > > warning on "bananapi,s070wv20-ct16" panel.
> > > > > > > > > >
> > > > > > > > > > WARNING: CPU: 0 PID: 31 at drivers/gpu/drm/drm_atomic_helper.c:1429 drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0
> > > > > > > > > > [CRTC:46:crtc-0] vblank wait timed out
> > > > > > > > > > Modules linked in:
> > > > > > > > > > CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 5.1.0-next-20190514-00025-g5186cdf10757-dirty #6
> > > > > > > > > > Hardware name: Allwinner sun8i Family
> > > > > > > > > > Workqueue: events deferred_probe_work_func
> > > > > > > > > > [<c010ed54>] (unwind_backtrace) from [<c010b76c>] (show_stack+0x10/0x14)
> > > > > > > > > > [<c010b76c>] (show_stack) from [<c0688c70>] (dump_stack+0x84/0x98)
> > > > > > > > > > [<c0688c70>] (dump_stack) from [<c011d9e4>] (__warn+0xfc/0x114)
> > > > > > > > > > [<c011d9e4>] (__warn) from [<c011da40>] (warn_slowpath_fmt+0x44/0x68)
> > > > > > > > > > [<c011da40>] (warn_slowpath_fmt) from [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1+0x298/0x2a0)
> > > > > > > > > > [<c040cd50>] (drm_atomic_helper_wait_for_vblanks.part.1) from [<c040e694>] (drm_atomic_helper_commit_tail_rpm+0x5c/0x6c)
> > > > > > > > > > [<c040e694>] (drm_atomic_helper_commit_tail_rpm) from [<c040e4dc>] (commit_tail+0x40/0x6c)
> > > > > > > > > > [<c040e4dc>] (commit_tail) from [<c040e5cc>] (drm_atomic_helper_commit+0xbc/0x128)
> > > > > > > > > > [<c040e5cc>] (drm_atomic_helper_commit) from [<c0411b64>] (restore_fbdev_mode_atomic+0x1cc/0x1dc)
> > > > > > > > > > [<c0411b64>] (restore_fbdev_mode_atomic) from [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
> > > > > > > > > > [<c04156f8>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0415774>] (drm_fb_helper_set_par+0x30/0x54)
> > > > > > > > > > [<c0415774>] (drm_fb_helper_set_par) from [<c03ad450>] (fbcon_init+0x560/0x5ac)
> > > > > > > > > > [<c03ad450>] (fbcon_init) from [<c03eb8a0>] (visual_init+0xbc/0x104)
> > > > > > > > > > [<c03eb8a0>] (visual_init) from [<c03ed1b8>] (do_bind_con_driver+0x1b0/0x390)
> > > > > > > > > > [<c03ed1b8>] (do_bind_con_driver) from [<c03ed780>] (do_take_over_console+0x13c/0x1c4)
> > > > > > > > > > [<c03ed780>] (do_take_over_console) from [<c03ad800>] (do_fbcon_takeover+0x74/0xcc)
> > > > > > > > > > [<c03ad800>] (do_fbcon_takeover) from [<c013c9c8>] (notifier_call_chain+0x44/0x84)
> > > > > > > > > > [<c013c9c8>] (notifier_call_chain) from [<c013cd20>] (__blocking_notifier_call_chain+0x48/0x60)
> > > > > > > > > > [<c013cd20>] (__blocking_notifier_call_chain) from [<c013cd50>] (blocking_notifier_call_chain+0x18/0x20)
> > > > > > > > > > [<c013cd50>] (blocking_notifier_call_chain) from [<c03a6e44>] (register_framebuffer+0x1e0/0x2f8)
> > > > > > > > > > [<c03a6e44>] (register_framebuffer) from [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock+0x2fc/0x50c)
> > > > > > > > > > [<c04153c0>] (__drm_fb_helper_initial_config_and_unlock) from [<c04158c8>] (drm_fbdev_client_hotplug+0xe8/0x1b8)
> > > > > > > > > > [<c04158c8>] (drm_fbdev_client_hotplug) from [<c0415a20>] (drm_fbdev_generic_setup+0x88/0x118)
> > > > > > > > > > [<c0415a20>] (drm_fbdev_generic_setup) from [<c043f060>] (sun4i_drv_bind+0x128/0x160)
> > > > > > > > > > [<c043f060>] (sun4i_drv_bind) from [<c044b588>] (try_to_bring_up_master+0x164/0x1a0)
> > > > > > > > > > [<c044b588>] (try_to_bring_up_master) from [<c044b658>] (__component_add+0x94/0x140)
> > > > > > > > > > [<c044b658>] (__component_add) from [<c0445e0c>] (sun6i_dsi_probe+0x144/0x234)
> > > > > > > > > > [<c0445e0c>] (sun6i_dsi_probe) from [<c0452ee4>] (platform_drv_probe+0x48/0x9c)
> > > > > > > > > > [<c0452ee4>] (platform_drv_probe) from [<c04512bc>] (really_probe+0x1dc/0x2c8)
> > > > > > > > > > [<c04512bc>] (really_probe) from [<c0451508>] (driver_probe_device+0x60/0x160)
> > > > > > > > > > [<c0451508>] (driver_probe_device) from [<c044f794>] (bus_for_each_drv+0x74/0xb8)
> > > > > > > > > > [<c044f794>] (bus_for_each_drv) from [<c045106c>] (__device_attach+0xd0/0x13c)
> > > > > > > > > > [<c045106c>] (__device_attach) from [<c0450464>] (bus_probe_device+0x84/0x8c)
> > > > > > > > > > [<c0450464>] (bus_probe_device) from [<c04508f0>] (deferred_probe_work_func+0x64/0x90)
> > > > > > > > > > [<c04508f0>] (deferred_probe_work_func) from [<c0135970>] (process_one_work+0x204/0x420)
> > > > > > > > > > [<c0135970>] (process_one_work) from [<c013690c>] (worker_thread+0x274/0x5a0)
> > > > > > > > > > [<c013690c>] (worker_thread) from [<c013b3d8>] (kthread+0x11c/0x14c)
> > > > > > > > > > [<c013b3d8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
> > > > > > > > > > Exception stack(0xde539fb0 to 0xde539ff8)
> > > > > > > > > > 9fa0: 00000000 00000000 00000000 00000000
> > > > > > > > > > 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > > > > > > > > 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > > > > > > > > ---[ end trace 4017fea4906ab391 ]---
> > > > > > > > > >
> > > > > > > > > > But accordingly to Allwinner A33, A64 BSP codes [1] [2] this divider
> > > > > > > > > > is clearly using 'format/lanes' for dsi divider value, dsi_clk.clk_div
> > > > > > > > > >
> > > > > > > > > > Which would compute the pll_freq and set a clock rate for it in
> > > > > > > > > > [3] and [4] respectively.
> > > > > > > > > >
> > > > > > > > > > The same issue has reproduced in A33, A64 with 4-lane and 2-lane devices
> > > > > > > > > > and got fixed with this computation logic 'format/lanes', so this patch
> > > > > > > > > > using dclk min and max dividers as per BSP.
> > > > > > > > > >
> > > > > > > > > > [1] https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1106
> > > > > > > > > > [2] https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L213
> > > > > > > > > > [3] https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1127
> > > > > > > > > > [4] https://github.com/BPI-SINOVOIP/BPI-M2M-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp/de/disp_lcd.c#L1161
> > > > > > > > >
> > > > > > > > > In that mail, I've pointed out that clk_div isn't used for the TCON dclk divider:
> > > > > > > > > http://lists.infradead.org/pipermail/linux-arm-kernel/2019-February/629596.html
> > > > > > > > >
> > > > > > > > > The only reply you've sent is that you indeed see that the divider is
> > > > > > > > > set to 4 in the BSP, but you're now saying that the BSP can change
> > > > > > > > > it. If so, then please point exactly the flaw in the explanation in
> > > > > > > > > that mail.
> > > > > > > >
> > > > > > > > Frankly, I have explained these details in commit message and previous
> > > > > > > > version patch[1] with print messages on the code.
> > > > > > > >
> > > > > > > > BSP has tcon_div and dsi_div. dsi_div is dynamic which depends on
> > > > > > > > bpp/lanes and it indeed depends on PLL computation (not tcon_div),
> > > > > > > > anyway I have explained again on this initial link you mentioned.
> > > > > > > > Please have a look and get back.
> > > > > > >
> > > > > > > I'll have a look, thanks.
> > > > > > >
> > > > > > > I've given your patches a try on my setup though, and this patch
> > > > > > > breaks it with vblank timeouts and some horizontal lines that looks
> > > > > > > like what should be displayed, but blinking and on the right of the
> > > > > > > display. The previous ones are fine though.
> > > > > >
> > > > > > Would you please send me the link of panel driver.
> > > > >
> > > > > It's drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
> > > >
> > > > Look like this panel work even w/o any vendor sequence. it's similar
> > > > to the 4-lane panel I have with RGB888, so the dclk div is 6, is it
> > > > working with this divider?
> > >
> > > It works with 4, it doesn't work with 6.
> >
> > Can be the pixel clock with associated timings can make this diff.
> > Would you send me the pixel clock, pll_rate and timings this panel
> > used it from BSP?
>
> This board never had an Allwinner BSP

Running on BSP would help to understand some clue, anyway would you
send me the the value PLL_MIPI register (devme 0x1c20040) on this
board. I'm trying to understand how it value in your case.