[tip:x86/timers] x86/hpet: Use common init for legacy clockevent

From: tip-bot for Thomas Gleixner
Date: Thu Jun 27 2019 - 19:53:30 EST


Commit-ID: 49adaa60fa75a04457d30f38321378cdc3547212
Gitweb: https://git.kernel.org/tip/49adaa60fa75a04457d30f38321378cdc3547212
Author: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
AuthorDate: Sun, 23 Jun 2019 15:24:08 +0200
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitDate: Fri, 28 Jun 2019 00:57:27 +0200

x86/hpet: Use common init for legacy clockevent

Replace the static initialization of the legacy clockevent with runtime
initialization utilizing the common init function as the last preparatory
step to switch the legacy clockevent over to the channel 0 storage in
hpet_base.

This comes with a twist. The static clockevent initializer has selected
support for periodic and oneshot mode unconditionally whether the HPET
config advertised periodic mode or not. Even the pre clockevents code did
this. But....

Using the conditional in hpet_init_clockevent() makes at least Qemu and one
hardware machine fail to boot. There are two issues which cause the boot
failure:

#1 After the timer delivery test in IOAPIC and the IOAPIC setup the next
interrupt is not delivered despite the HPET channel being programmed
correctly. Reprogramming the HPET after switching to IOAPIC makes it
work again. After fixing this, the next issue surfaces:

#2 Due to the unconditional periodic mode 'availability' the Local APIC
timer calibration can hijack the global clockevents event handler
without causing damage. Using oneshot at this stage makes if hang
because the HPET does not get reprogrammed due to the handler
hijacking. Duh, stupid me!

Both issues require major surgery and especially the kick HPET again after
enabling IOAPIC results in really nasty hackery. This 'assume periodic
works' magic has survived since HPET support got added, so it's
questionable whether this should be fixed. Both Qemu and the failing
hardware machine support periodic mode despite the fact that both don't
advertise it in the configuration register and both need that extra kick
after switching to IOAPIC. Seems to be a feature...

Keep the 'assume periodic works' magic around and add a big fat comment.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Reviewed-by: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Ricardo Neri <ricardo.neri-calderon@xxxxxxxxxxxxxxx>
Cc: Ashok Raj <ashok.raj@xxxxxxxxx>
Cc: Andi Kleen <andi.kleen@xxxxxxxxx>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
Cc: Stephane Eranian <eranian@xxxxxxxxxx>
Cc: Ravi Shankar <ravi.v.shankar@xxxxxxxxx>
Link: https://lkml.kernel.org/r/20190623132436.646565913@xxxxxxxxxxxxx

---
arch/x86/kernel/hpet.c | 87 +++++++++++++++++++++++++++++++-------------------
1 file changed, 54 insertions(+), 33 deletions(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 80497fe5354c..35633e577d21 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -66,6 +66,9 @@ bool boot_hpet_disable;
bool hpet_force_user;
static bool hpet_verbose;

+/*
+ * The HPET clock event device wrapped in a channel for conversion
+ */
static struct hpet_channel hpet_channel0;

static inline
@@ -294,22 +297,6 @@ static void hpet_enable_legacy_int(void)
hpet_legacy_int_enabled = true;
}

-static void hpet_legacy_clockevent_register(struct hpet_channel *hc)
-{
- /* Start HPET legacy interrupts */
- hpet_enable_legacy_int();
-
- /*
- * Start HPET with the boot CPU's cpumask and make it global after
- * the IO_APIC has been initialized.
- */
- hc->evt.cpumask = cpumask_of(boot_cpu_data.cpu_index);
- clockevents_config_and_register(&hc->evt, hpet_freq,
- HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
- global_clock_event = &hc->evt;
- pr_debug("Clockevent registered\n");
-}
-
static int hpet_clkevt_set_state_periodic(struct clock_event_device *evt)
{
unsigned int channel = clockevent_to_channel(evt)->num;
@@ -430,23 +417,57 @@ static void hpet_init_clockevent(struct hpet_channel *hc, unsigned int rating)
}
}

-/*
- * The HPET clock event device wrapped in a channel for conversion
- */
-static struct hpet_channel hpet_channel0 = {
- .evt = {
- .name = "hpet",
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_state_periodic = hpet_clkevt_set_state_periodic,
- .set_state_oneshot = hpet_clkevt_set_state_oneshot,
- .set_state_shutdown = hpet_clkevt_set_state_shutdown,
- .tick_resume = hpet_clkevt_legacy_resume,
- .set_next_event = hpet_clkevt_set_next_event,
- .irq = 0,
- .rating = 50,
- }
-};
+static void __init hpet_legacy_clockevent_register(struct hpet_channel *hc)
+{
+ /*
+ * Start HPET with the boot CPU's cpumask and make it global after
+ * the IO_APIC has been initialized.
+ */
+ hc->cpu = boot_cpu_data.cpu_index;
+ strncpy(hc->name, "hpet", sizeof(hc->name));
+ hpet_init_clockevent(hc, 50);
+
+ hc->evt.tick_resume = hpet_clkevt_legacy_resume;
+
+ /*
+ * Legacy horrors and sins from the past. HPET used periodic mode
+ * unconditionally forever on the legacy channel 0. Removing the
+ * below hack and using the conditional in hpet_init_clockevent()
+ * makes at least Qemu and one hardware machine fail to boot.
+ * There are two issues which cause the boot failure:
+ *
+ * #1 After the timer delivery test in IOAPIC and the IOAPIC setup
+ * the next interrupt is not delivered despite the HPET channel
+ * being programmed correctly. Reprogramming the HPET after
+ * switching to IOAPIC makes it work again. After fixing this,
+ * the next issue surfaces:
+ *
+ * #2 Due to the unconditional periodic mode availability the Local
+ * APIC timer calibration can hijack the global clockevents
+ * event handler without causing damage. Using oneshot at this
+ * stage makes if hang because the HPET does not get
+ * reprogrammed due to the handler hijacking. Duh, stupid me!
+ *
+ * Both issues require major surgery and especially the kick HPET
+ * again after enabling IOAPIC results in really nasty hackery.
+ * This 'assume periodic works' magic has survived since HPET
+ * support got added, so it's questionable whether this should be
+ * fixed. Both Qemu and the failing hardware machine support
+ * periodic mode despite the fact that both don't advertise it in
+ * the configuration register and both need that extra kick after
+ * switching to IOAPIC. Seems to be a feature...
+ */
+ hc->evt.features |= CLOCK_EVT_FEAT_PERIODIC;
+ hc->evt.set_state_periodic = hpet_clkevt_set_state_periodic;
+
+ /* Start HPET legacy interrupts */
+ hpet_enable_legacy_int();
+
+ clockevents_config_and_register(&hc->evt, hpet_freq,
+ HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
+ global_clock_event = &hc->evt;
+ pr_debug("Clockevent registered\n");
+}

/*
* HPET MSI Support