[patch v3 1/5] AST2500 DMA UART driver

From: sudheer.v
Date: Tue Jun 25 2019 - 06:42:55 EST


From: sudheer veliseti <sudheer.open@xxxxxxxxx>

UART driver for Aspeed's bmc chip AST2500

Design approch:
AST2500 has dedicated Uart DMA controller which has 12 sets of Tx and RX channels
connected to UART controller directly.
Since the DMA controller have dedicated buffers and registers,
there would be little benifit in adding DMA framework overhead.
So the software for DMA controller is included within the UART driver itself.

implementation details:
'struct uart_8250_port' serial port is populated and registered with 8250_core.
Rx and Tx dma channels are requested from DMA controller software Layer, which
is part of uart driver itself.
Interrupt service routine for DMA controller is the crucial one for Handling all
the tx and rx data. ISRs installed for individual uarts are just dummy,and are helpful
only to report any spurious interrupts in hardware.


Signed-off-by: sudheer veliseti <sudheer.open@xxxxxxxxx>
---

Changes in v3:
-custom debug replaced by in kerenl dynamic debug: pr_debug
-change-logs added

.../tty/serial/8250/8250_ast2500_uart_dma.c | 1879 +++++++++++++++++
1 file changed, 1879 insertions(+)
create mode 100644 drivers/tty/serial/8250/8250_ast2500_uart_dma.c

diff --git a/drivers/tty/serial/8250/8250_ast2500_uart_dma.c b/drivers/tty/serial/8250/8250_ast2500_uart_dma.c
new file mode 100644
index 000000000000..13911a0a745a
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_ast2500_uart_dma.c
@@ -0,0 +1,1879 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DMA UART Driver for ASPEED BMC chip: AST2500
+ *
+ * Copyright (C) 2019 sudheer Kumar veliseti, Aspeed technology Inc.
+ * <open.sudheer@xxxxxxxxx>
+ *
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/nmi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include "8250.h"
+
+#define DMA_BUFF_SIZE 0x1000 // 4096
+#define SDMA_RX_BUFF_SIZE 0x10000 // 65536
+
+#define SDDMA_RX_FIX 1
+/* enum ast_uart_chan_op
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+ */
+
+enum ast_uart_chan_op {
+ AST_UART_DMAOP_TRIGGER,
+ AST_UART_DMAOP_STOP,
+ AST_UART_DMAOP_PAUSE,
+};
+
+/* ast_uart_dma_cbfn_t * * buffer callback routine type */
+typedef void (*ast_uart_dma_cbfn_t)(void *dev_id, u16 len);
+
+struct ast_sdma_info {
+ u8 ch_no;
+ u8 direction;
+ u8 enable;
+ void *priv;
+ char *sdma_virt_addr;
+ dma_addr_t dma_phy_addr;
+ /* cdriver callbacks */
+ ast_uart_dma_cbfn_t callback_fn; /* buffer done callback */
+};
+
+#define AST_UART_SDMA_CH 12
+
+struct ast_sdma_ch {
+ struct ast_sdma_info tx_dma_info[AST_UART_SDMA_CH];
+ struct ast_sdma_info rx_dma_info[AST_UART_SDMA_CH];
+};
+
+struct ast_sdma {
+ void __iomem *reg_base;
+ int dma_irq;
+ struct ast_sdma_ch *dma_ch;
+ struct regmap *map;
+};
+
+
+
+#define UART_TX_SDMA_EN 0x00
+#define UART_RX_SDMA_EN 0x04
+#define UART_SDMA_CONF 0x08
+#define UART_SDMA_TIMER 0x0C
+#define UART_TX_SDMA_REST 0x20
+#define UART_RX_SDMA_REST 0x24
+#define UART_TX_SDMA_IER 0x30
+#define UART_TX_SDMA_ISR 0x34
+#define UART_RX_SDMA_IER 0x38
+#define UART_RX_SDMA_ISR 0x3C
+#define UART_TX_R_POINT(x) (0x40 + (x * 0x20))
+#define UART_TX_W_POINT(x) (0x44 + (x * 0x20))
+#define UART_TX_SDMA_ADDR(x) (0x48 + (x * 0x20))
+#define UART_RX_R_POINT(x) (0x50 + (x * 0x20))
+#define UART_RX_W_POINT(x) (0x54 + (x * 0x20))
+#define UART_RX_SDMA_ADDR(x) (0x58 + (x * 0x20))
+
+/* UART_TX_SDMA_EN-0x00 : UART TX DMA Enable */
+/* UART_RX_SDMA_EN-0x04 : UART RX DMA Enable */
+#define SDMA_CH_EN(x) (0x1 << (x))
+
+/* UART_SDMA_CONF - 0x08 : Misc, Buffer size */
+#define SDMA_TX_BUFF_SIZE_MASK (0x3)
+#define SDMA_SET_TX_BUFF_SIZE(x) (x)
+#define SDMA_BUFF_SIZE_1KB (0x0)
+#define SDMA_BUFF_SIZE_4KB (0x1)
+#define SDMA_BUFF_SIZE_16KB (0x2)
+#define SDMA_BUFF_SIZE_64KB (0x3)
+#define SDMA_RX_BUFF_SIZE_MASK (0x3 << 2)
+#define SDMA_SET_RX_BUFF_SIZE(x) (x << 2)
+#define SDMA_TIMEOUT_DIS (0x1 << 4)
+
+/* UART_SDMA_TIMER-0x0C : UART DMA time out timer */
+
+/* UART_TX_SDMA_IER 0x30 */
+/* UART_TX_SDMA_ISR 0x34 */
+
+#define UART_SDMA11_INT (1 << 11)
+#define UART_SDMA10_INT (1 << 10)
+#define UART_SDMA9_INT (1 << 9)
+#define UART_SDMA8_INT (1 << 8)
+#define UART_SDMA7_INT (1 << 7)
+#define UART_SDMA6_INT (1 << 6)
+#define UART_SDMA5_INT (1 << 5)
+#define UART_SDMA4_INT (1 << 4)
+#define UART_SDMA3_INT (1 << 3)
+#define UART_SDMA2_INT (1 << 2)
+#define UART_SDMA1_INT (1 << 1)
+#define UART_SDMA0_INT (1 << 0)
+
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass IRQF_SHARED to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+static unsigned int nr_uarts = CONFIG_AST_RUNTIME_DMA_UARTS;
+
+
+#define PASS_LIMIT 256
+
+#include <asm/serial.h>
+
+#define UART_DMA_NR CONFIG_AST_NR_DMA_UARTS
+
+
+struct ast_uart_priv_data {
+
+ unsigned short line; //index of uart port
+ struct uart_8250_port *up;
+ u8 dma_ch; // dma channel number
+ struct circ_buf rx_dma_buf;
+ struct circ_buf tx_dma_buf;
+ dma_addr_t dma_rx_addr; /* Mapped ADMA descr. table */
+ dma_addr_t dma_tx_addr; /* Mapped ADMA descr. table */
+#ifdef SDDMA_RX_FIX
+ struct tasklet_struct rx_tasklet;
+#else
+ struct timer_list rx_timer;
+#endif
+ struct tasklet_struct tx_tasklet;
+ spinlock_t lock;
+ int tx_done;
+ int tx_count;
+};
+
+
+static inline struct uart_8250_port *
+to_uart_8250_port(struct uart_port *uart) {
+ return container_of(uart, struct uart_8250_port, port);
+}
+
+struct irq_info {
+ spinlock_t lock;
+ struct uart_8250_port *up;
+};
+
+static struct irq_info ast_uart_irq[1];
+static DEFINE_MUTEX(ast_uart_mutex);
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10
+ | UART_FCR_DMA_SELECT,
+ .flags = UART_CAP_FIFO,
+ },
+};
+
+/* sane hardware needs no mapping */
+#define map_8250_in_reg(up, offset) (offset)
+#define map_8250_out_reg(up, offset) (offset)
+
+// SDMA - software Layer : (previously was in ast-uart-sdma.c)
+static inline void ast_uart_sdma_write(struct ast_sdma *sdma,
+ u32 val, u32 reg)
+{
+ pr_debug("uart dma write:val:%x,reg:%x\n", val, reg);
+ writel(val, sdma->reg_base + reg);
+}
+
+static inline u32 ast_uart_sdma_read(struct ast_sdma *sdma, u32 reg)
+{
+ return readl(sdma->reg_base + reg);
+}
+
+struct ast_sdma ast_uart_sdma;
+
+int ast_uart_rx_sdma_enqueue(u8 ch, dma_addr_t rx_buff)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ pr_debug("ch = %d, rx buff = %x\n", ch, rx_buff);
+
+ local_irq_save(flags);
+ ast_uart_sdma_write(sdma, rx_buff, UART_RX_SDMA_ADDR(ch));
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int ast_uart_tx_sdma_enqueue(u8 ch, dma_addr_t tx_buff)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ pr_debug("ch = %d, tx buff = %x\n", ch, tx_buff);
+
+ local_irq_save(flags);
+ ast_uart_sdma_write(sdma, tx_buff, UART_TX_SDMA_ADDR(ch));
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int ast_uart_rx_sdma_ctrl(u8 ch, enum ast_uart_chan_op op)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ struct ast_sdma_info *dma_ch = &(sdma->dma_ch->rx_dma_info[ch]);
+
+ pr_debug("RX DMA CTRL [ch %d]\n", ch);
+
+ local_irq_save(flags);
+
+ switch (op) {
+ case AST_UART_DMAOP_TRIGGER:
+ pr_debug("Trigger\n");
+ dma_ch->enable = 1;
+#ifdef SDDMA_RX_FIX
+#else
+ ast_uart_set_sdma_time_out(0xffff);
+#endif
+ // set enable
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_RX_SDMA_EN) | (0x1 << ch),
+ UART_RX_SDMA_EN);
+ break;
+ case AST_UART_DMAOP_STOP:
+ // disable engine
+ pr_debug("STOP\n");
+ dma_ch->enable = 0;
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_RX_SDMA_EN) &
+ ~(0x1 << ch),
+ UART_RX_SDMA_EN);
+ // set reset
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_RX_SDMA_REST) |
+ (0x1 << ch),
+ UART_RX_SDMA_REST);
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_RX_SDMA_REST) &
+ ~(0x1 << ch),
+ UART_RX_SDMA_REST);
+
+ ast_uart_sdma_write(sdma, 0, UART_RX_R_POINT(ch));
+ ast_uart_sdma_write(sdma, dma_ch->dma_phy_addr, UART_RX_SDMA_ADDR(ch));
+ break;
+ case AST_UART_DMAOP_PAUSE:
+ // disable engine
+ dma_ch->enable = 0;
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_RX_SDMA_EN) &
+ ~(0x1 << ch),
+ UART_RX_SDMA_EN);
+ break;
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+int ast_uart_tx_sdma_ctrl(u8 ch, enum ast_uart_chan_op op)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ struct ast_sdma_info *dma_ch = &(sdma->dma_ch->tx_dma_info[ch]);
+
+ pr_debug("TX DMA CTRL [ch %d]\n", ch);
+
+ local_irq_save(flags);
+
+ switch (op) {
+ case AST_UART_DMAOP_TRIGGER:
+ pr_debug("TRIGGER : Enable\n");
+ dma_ch->enable = 1;
+ // set enable
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_TX_SDMA_EN) | (0x1 << ch),
+ UART_TX_SDMA_EN);
+ break;
+ case AST_UART_DMAOP_STOP:
+ pr_debug("STOP : DISABLE & RESET\n");
+ dma_ch->enable = 0;
+ // disable engine
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_TX_SDMA_EN) &
+ ~(0x1 << ch),
+ UART_TX_SDMA_EN);
+ // set reset
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_TX_SDMA_REST) |
+ (0x1 << ch),
+ UART_TX_SDMA_REST);
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_TX_SDMA_REST) &
+ ~(0x1 << ch),
+ UART_TX_SDMA_REST);
+
+ ast_uart_sdma_write(sdma, 0, UART_TX_W_POINT(ch));
+ break;
+ case AST_UART_DMAOP_PAUSE:
+ pr_debug("PAUSE : DISABLE\n");
+ dma_ch->enable = 0;
+ // disable engine
+ ast_uart_sdma_write(sdma, ast_uart_sdma_read(sdma, UART_TX_SDMA_EN) &
+ ~(0x1 << ch),
+ UART_TX_SDMA_EN);
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+u32 ast_uart_get_tx_sdma_pt(u8 ch)
+{
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ return ast_uart_sdma_read(sdma, UART_TX_R_POINT(ch));
+}
+
+int ast_uart_tx_sdma_update(u8 ch, u16 point)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ pr_debug("TX DMA CTRL [ch %d] point %d\n", ch, point);
+ local_irq_save(flags);
+ ast_uart_sdma_write(sdma, point, UART_TX_W_POINT(ch));
+ local_irq_restore(flags);
+ return 0;
+}
+
+int ast_uart_tx_sdma_request(u8 ch, ast_uart_dma_cbfn_t rtn, void *id)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ struct ast_sdma_info *dma_ch = &(sdma->dma_ch->tx_dma_info[ch]);
+
+ pr_debug("TX DMA REQUEST ch = %d\n", ch);
+
+ local_irq_save(flags);
+
+ if (dma_ch->enable) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ dma_ch->priv = id;
+ dma_ch->callback_fn = rtn;
+
+ // DMA IRQ En
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_TX_SDMA_IER) | (1 << ch),
+ UART_TX_SDMA_IER);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int ast_uart_rx_sdma_update(u8 ch, u16 point)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ pr_debug("RX DMA CTRL [ch %d] point %x\n", ch, point);
+
+ local_irq_save(flags);
+ ast_uart_sdma_write(sdma, point, UART_RX_R_POINT(ch));
+ local_irq_restore(flags);
+ return 0;
+}
+
+#ifdef SDDMA_RX_FIX
+char *ast_uart_rx_sdma_request(u8 ch, ast_uart_dma_cbfn_t rtn, void *id)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ struct ast_sdma_info *dma_ch = &(sdma->dma_ch->rx_dma_info[ch]);
+
+ pr_debug("RX DMA REQUEST ch = %d\n", ch);
+
+ local_irq_save(flags);
+
+ if (dma_ch->enable) {
+ local_irq_restore(flags);
+ return 0;
+ }
+ dma_ch->priv = id;
+
+ dma_ch->callback_fn = rtn;
+
+ // DMA IRQ En
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_RX_SDMA_IER) | (1 << ch),
+ UART_RX_SDMA_IER);
+
+ local_irq_restore(flags);
+
+ return dma_ch->sdma_virt_addr;
+}
+
+#else
+char *ast_uart_rx_sdma_request(u8 ch, void *id)
+{
+ unsigned long flags;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ struct ast_sdma_info *dma_ch = &(sdma->dma_ch->rx_dma_info[ch]);
+
+ pr_debug("RX DMA REQUEST ch = %d\n", ch);
+
+ local_irq_save(flags);
+
+ if (dma_ch->enable) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ dma_ch->priv = id;
+
+ local_irq_restore(flags);
+ return dma_ch->sdma_virt_addr;
+}
+#endif
+
+u16 ast_uart_get_rx_sdma_pt(u8 ch)
+{
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ return ast_uart_sdma_read(sdma, UART_RX_W_POINT(ch));
+}
+
+void ast_uart_set_sdma_time_out(u16 val)
+{
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ ast_uart_sdma_write(sdma, val, UART_SDMA_TIMER);
+}
+
+static inline void ast_sdma_bufffdone(struct ast_sdma_info *sdma_ch)
+{
+ u32 len;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+
+ if (sdma_ch->enable == 0) {
+ pr_debug("sdma Please check ch_no %x %s!!!!!\n",
+ sdma_ch->ch_no, sdma_ch->direction ? "TX" : "RX");
+ if (sdma_ch->direction) {
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_TX_SDMA_EN)
+ & ~(0x1 << sdma_ch->ch_no), UART_TX_SDMA_EN);
+ } else {
+ ast_uart_sdma_write(sdma,
+ ast_uart_sdma_read(sdma, UART_RX_SDMA_EN) &
+ ~(0x1 << sdma_ch->ch_no), UART_RX_SDMA_EN);
+ ast_uart_rx_sdma_update(sdma_ch->ch_no,
+ ast_uart_get_rx_sdma_pt(sdma_ch->ch_no));
+ pr_debug("OFFSET : UART_RX_SDMA_EN = %x\n ",
+ ast_uart_sdma_read(sdma, UART_RX_SDMA_EN));
+ }
+ return;
+ }
+
+ if (sdma_ch->direction) {
+ len = ast_uart_sdma_read(sdma, UART_TX_R_POINT(sdma_ch->ch_no));
+ pr_debug("tx rp %x , wp %x\n",
+ ast_uart_sdma_read(sdma, UART_TX_R_POINT(sdma_ch->ch_no)),
+ ast_uart_sdma_read(sdma, UART_TX_W_POINT(sdma_ch->ch_no))
+ );
+ } else {
+ pr_debug("rx rp %x , wp %x\n",
+ ast_uart_sdma_read(sdma, UART_RX_R_POINT(sdma_ch->ch_no)),
+ ast_uart_sdma_read(sdma, UART_RX_W_POINT(sdma_ch->ch_no))
+ );
+ len = ast_uart_sdma_read(sdma, UART_RX_W_POINT(sdma_ch->ch_no));
+ }
+
+ pr_debug("<dma dwn>: ch[%d] : %s ,len : %d\n", sdma_ch->ch_no,
+ sdma_ch->direction ? "tx" : "rx", len);
+
+ if (sdma_ch->callback_fn != NULL)
+ (sdma_ch->callback_fn)(sdma_ch->priv, len);
+}
+
+static irqreturn_t ast_uart_sdma_isr(int irq, void *dev_id)
+{
+ struct ast_sdma *sdma = (struct ast_sdma *)dev_id;
+
+ u32 tx_sts = ast_uart_sdma_read(sdma, UART_TX_SDMA_ISR);
+ u32 rx_sts = ast_uart_sdma_read(sdma, UART_RX_SDMA_ISR);
+
+ pr_debug("tx sts : %x, rx sts : %x\n", tx_sts, rx_sts);
+
+ if ((tx_sts == 0) && (rx_sts == 0)) {
+ pr_debug("SDMA IRQ ERROR !!!\n");
+ return IRQ_HANDLED;
+ }
+
+ if (rx_sts & UART_SDMA0_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA0_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[0]));
+ } else if (rx_sts & UART_SDMA1_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA1_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[1]));
+ } else if (rx_sts & UART_SDMA2_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA2_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[2]));
+ } else if (rx_sts & UART_SDMA3_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA3_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[3]));
+ } else if (rx_sts & UART_SDMA4_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA4_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[4]));
+ } else if (rx_sts & UART_SDMA5_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA5_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[5]));
+ } else if (rx_sts & UART_SDMA6_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA6_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[6]));
+ } else if (rx_sts & UART_SDMA7_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA7_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[7]));
+ } else if (rx_sts & UART_SDMA8_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA8_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[8]));
+ } else if (rx_sts & UART_SDMA9_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA9_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[9]));
+ } else if (rx_sts & UART_SDMA10_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA10_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[10]));
+ } else if (rx_sts & UART_SDMA11_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA11_INT, UART_RX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->rx_dma_info[11]));
+ } else {
+
+ }
+
+ if (tx_sts & UART_SDMA0_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA0_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[0]));
+ } else if (tx_sts & UART_SDMA1_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA1_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[1]));
+ } else if (tx_sts & UART_SDMA2_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA2_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[2]));
+ } else if (tx_sts & UART_SDMA3_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA3_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[3]));
+ } else if (tx_sts & UART_SDMA4_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA4_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[4]));
+ } else if (tx_sts & UART_SDMA5_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA5_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[5]));
+ } else if (tx_sts & UART_SDMA6_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA6_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[6]));
+ } else if (tx_sts & UART_SDMA7_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA7_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[7]));
+ } else if (tx_sts & UART_SDMA8_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA8_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[8]));
+ } else if (tx_sts & UART_SDMA9_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA9_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[9]));
+ } else if (tx_sts & UART_SDMA10_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA10_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[10]));
+ } else if (tx_sts & UART_SDMA11_INT) {
+ ast_uart_sdma_write(sdma, UART_SDMA11_INT, UART_TX_SDMA_ISR);
+ ast_sdma_bufffdone(&(sdma->dma_ch->tx_dma_info[11]));
+ } else {
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ast_uart_sdma_probe(void)
+{
+ int i;
+ struct device_node *node;
+ int ret;
+ struct ast_sdma *sdma = &ast_uart_sdma;
+ char *rx_dma_virt_addr;
+ dma_addr_t rx_dma_phy_addr;
+
+ sdma->dma_ch = kzalloc(sizeof(struct ast_sdma_ch), GFP_KERNEL);
+ if (!sdma->dma_ch)
+ return -ENOMEM;
+
+ // sdma memory mapping
+ node = of_find_compatible_node(NULL, NULL, "aspeed,ast-uart-sdma");
+ if (!node)
+ return -ENODEV;
+
+ sdma->reg_base = of_iomap(node, 0);
+ if (IS_ERR(sdma->reg_base))
+ return PTR_ERR(sdma->map);
+ rx_dma_virt_addr = dma_alloc_coherent(NULL,
+ SDMA_RX_BUFF_SIZE * AST_UART_SDMA_CH, &rx_dma_phy_addr, GFP_KERNEL);
+
+ if (!rx_dma_virt_addr) {
+ pr_debug("rx_dma_virt_addr Err:dma alloc Failed\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < AST_UART_SDMA_CH; i++) {
+ // TX ------------------------
+ sdma->dma_ch->tx_dma_info[i].enable = 0;
+ sdma->dma_ch->tx_dma_info[i].ch_no = i;
+ sdma->dma_ch->tx_dma_info[i].direction = 1;
+ ast_uart_sdma_write(sdma, 0, UART_TX_W_POINT(i));
+ // RX ------------------------
+ sdma->dma_ch->rx_dma_info[i].enable = 0;
+ sdma->dma_ch->rx_dma_info[i].ch_no = i;
+ sdma->dma_ch->rx_dma_info[i].direction = 0;
+ sdma->dma_ch->rx_dma_info[i].sdma_virt_addr =
+ rx_dma_virt_addr + (SDMA_RX_BUFF_SIZE * i);
+ sdma->dma_ch->rx_dma_info[i].dma_phy_addr =
+ rx_dma_phy_addr + (SDMA_RX_BUFF_SIZE * i);
+ ast_uart_sdma_write(sdma,
+ sdma->dma_ch->rx_dma_info[i].dma_phy_addr,
+ UART_RX_SDMA_ADDR(i));
+ ast_uart_sdma_write(sdma, 0, UART_RX_R_POINT(i));
+ }
+
+ ast_uart_sdma_write(sdma, 0xffffffff, UART_TX_SDMA_REST);
+ ast_uart_sdma_write(sdma, 0x0, UART_TX_SDMA_REST);
+
+ ast_uart_sdma_write(sdma, 0xffffffff, UART_RX_SDMA_REST);
+ ast_uart_sdma_write(sdma, 0x0, UART_RX_SDMA_REST);
+
+ ast_uart_sdma_write(sdma, 0, UART_TX_SDMA_EN);
+ ast_uart_sdma_write(sdma, 0, UART_RX_SDMA_EN);
+
+#ifdef SDDMA_RX_FIX
+ ast_uart_sdma_write(sdma, 0x200, UART_SDMA_TIMER);
+#else
+ ast_uart_sdma_write(sdma, 0xffff, UART_SDMA_TIMER);
+#endif
+
+ // TX
+ ast_uart_sdma_write(sdma, 0xfff, UART_TX_SDMA_ISR);
+ ast_uart_sdma_write(sdma, 0, UART_TX_SDMA_IER);
+
+ // RX
+ ast_uart_sdma_write(sdma, 0xfff, UART_RX_SDMA_ISR);
+ ast_uart_sdma_write(sdma, 0, UART_RX_SDMA_IER);
+
+ sdma->dma_irq = of_irq_get(node, 0);
+ ret = request_irq(sdma->dma_irq, ast_uart_sdma_isr, 0,
+ "sdma-intr", sdma);
+ if (ret) {
+ pr_debug("Unable to get UART SDMA IRQ %x\n", ret);
+ return -ENODEV;
+ }
+
+ ast_uart_sdma_write(sdma, SDMA_SET_TX_BUFF_SIZE(SDMA_BUFF_SIZE_4KB) |
+ SDMA_SET_RX_BUFF_SIZE(SDMA_BUFF_SIZE_64KB),
+ UART_SDMA_CONF);
+ return 0;
+}
+
+// END of SDMA Layer
+
+// UART Driver Layer
+
+static unsigned int ast_serial_in(struct uart_8250_port *up, int offset)
+{
+ offset = map_8250_in_reg(up, offset) << up->port.regshift;
+ return readb(up->port.membase + offset);
+}
+
+static void ast_serial_out(struct uart_8250_port *up, int offset, int value)
+{
+ /* Save the offset before it's remapped */
+ offset = map_8250_out_reg(up, offset) << up->port.regshift;
+ writeb(value, up->port.membase + offset);
+}
+
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) ast_serial_in(up, offset)
+#define serial_outp(up, offset, value) ast_serial_out(up, offset, value)
+
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_outp(up, UART_DLL, value & 0xff);
+ serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+
+static void ast_uart_tx_sdma_tasklet_func(unsigned long data)
+{
+
+ struct ast_uart_priv_data *priv = (struct ast_uart_priv_data *)data;
+ struct uart_8250_port *up = priv->up;
+ struct circ_buf *xmit = NULL;
+ u32 tx_pt;
+
+
+ if (!up)
+ return;
+ xmit = &up->port.state->xmit;
+ spin_lock(&up->port.lock);
+ priv->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dma_sync_single_for_device(up->port.dev, priv->dma_tx_addr,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ tx_pt = ast_uart_get_tx_sdma_pt(priv->dma_ch);
+
+ if (tx_pt > xmit->head) {
+ if ((tx_pt & 0xfffc) == 0)
+ ast_uart_tx_sdma_update(priv->dma_ch, 0xffff);
+ else
+ ast_uart_tx_sdma_update(priv->dma_ch, 0);
+ } else {
+ ast_uart_tx_sdma_update(priv->dma_ch, xmit->head);
+ }
+ ast_uart_tx_sdma_update(priv->dma_ch, xmit->head);
+ spin_unlock(&up->port.lock);
+}
+
+static void ast_uart_tx_buffdone(void *dev_id, u16 len)
+{
+
+ struct ast_uart_priv_data *priv = (struct ast_uart_priv_data *)dev_id;
+ struct uart_8250_port *up = priv->up;
+ struct circ_buf *xmit;
+
+ if (!up)
+ return;
+ xmit = &(up->port.state->xmit);
+
+ pr_debug("line[%d] : tx len = % d\n", priv->line, len);
+ spin_lock(&up->port.lock);
+ xmit->tail = len;
+ pr_debug(" line[%d], xmit->head = %d, xmit->tail = % d\n",
+ priv->line, xmit->head, xmit->tail);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (xmit->head != xmit->tail)
+ tasklet_schedule(&priv->tx_tasklet);
+
+ spin_unlock(&up->port.lock);
+}
+
+#ifdef SDDMA_RX_FIX
+static void ast_uart_rx_sdma_tasklet_func(unsigned long data)
+{
+ struct ast_uart_priv_data *priv = (struct ast_uart_priv_data *)data;
+ struct circ_buf *rx_ring = &priv->rx_dma_buf;
+ struct tty_port *ttyport;
+ int count;
+ int copy = 0;
+ struct uart_8250_port *up = priv->up;
+
+ if (!up)
+ return;
+
+ ttyport = &up->port.state->port;
+
+ pr_debug("line[%d], rx_ring->head = % d, rx_ring->tail = % d\n",
+ up->port.line, rx_ring->head, rx_ring->tail);
+ spin_lock(&up->port.lock);
+ if (rx_ring->head > rx_ring->tail) {
+ count = rx_ring->head - rx_ring->tail;
+ copy = tty_insert_flip_string(ttyport,
+ rx_ring->buf + rx_ring->tail, count);
+ } else if (rx_ring->head < rx_ring->tail) {
+ count = SDMA_RX_BUFF_SIZE - rx_ring->tail;
+ copy = tty_insert_flip_string(ttyport,
+ rx_ring->buf + rx_ring->tail, count);
+ } else {
+ count = 0;
+ }
+
+ if (copy != count)
+ pr_debug(" !!!!!!!!ERROR 111\n");
+ if (count) {
+ rx_ring->tail += count;
+ rx_ring->tail &= (SDMA_RX_BUFF_SIZE - 1);
+ up->port.icount.rx += count;
+ tty_flip_buffer_push(ttyport);
+ ast_uart_rx_sdma_update(priv->dma_ch, rx_ring->tail);
+ }
+ spin_unlock(&up->port.lock);
+}
+
+static void ast_uart_rx_buffdone(void *dev_id, u16 len)
+{
+ struct ast_uart_priv_data *priv = (struct ast_uart_priv_data *)dev_id;
+ struct circ_buf *rx_ring = &priv->rx_dma_buf;
+ struct uart_8250_port *up = priv->up;
+
+ if (!up)
+ return;
+ pr_debug("line[%d], head = %d,len:%d\n",
+ priv->line, priv->rx_dma_buf.head, len);
+ spin_lock(&up->port.lock);
+ rx_ring->head = len;
+ spin_unlock(&up->port.lock);
+ tasklet_schedule(&priv->rx_tasklet);
+}
+
+#else
+static void ast_uart_rx_timer_func(unsigned long data)
+{
+ struct ast_uart_priv_data *priv = (struct ast_uart_priv_data *)data;
+ struct uart_8250_port *up = priv->up;
+ struct tty_port *ttyport;
+ struct circ_buf *rx_ring;
+ struct tty_struct *tty;
+ char flag;
+ int count;
+ int copy;
+
+
+ if (!up)
+ return;
+ ttyport = &up->port.state->port;
+ rx_ring = &up->rx_dma_buf;
+ tty = up->port.state->port.tty;
+
+ pr_debug("line[%d], rx_ring->head = % d, rx_ring->tail = % d\n",
+ up->port.line, rx_ring->head, rx_ring->tail);
+ rx_ring->head = ast_uart_get_rx_sdma_pt(priv->dma_ch);
+ del_timer(&up->rx_timer);
+
+ if (rx_ring->head > rx_ring->tail) {
+ ast_uart_set_sdma_time_out(0xffff);
+ count = rx_ring->head - rx_ring->tail;
+ copy = tty_insert_flip_string(ttyport,
+ rx_ring->buf + rx_ring->tail, count);
+ } else if (rx_ring->head < rx_ring->tail) {
+ ast_uart_set_sdma_time_out(0xffff);
+ count = SDMA_RX_BUFF_SIZE - rx_ring->tail;
+ copy = tty_insert_flip_string(ttyport,
+ rx_ring->buf + rx_ring->tail, count);
+ } else {
+ count = 0;
+ // pr_debug("@@--%s-- ch = 0x%x\n", __func__, ch);
+ }
+
+ if (copy != count)
+ pr_debug(" !!!!!!!!ERROR 111\n");
+ rx_ring->tail += count;
+ rx_ring->tail &= (SDMA_RX_BUFF_SIZE - 1);
+
+ if (count) {
+ //pr_debug("\n count = % d\n", count);
+ up->port.icount.rx += count;
+ spin_lock(&up->port.lock);
+ tty_flip_buffer_push(ttyport);
+ spin_unlock(&up->port.lock);
+ //pr_debug("update rx_ring->tail % x\n", rx_ring->tail);
+ ast_uart_rx_sdma_update(priv->dma_ch, rx_ring->tail);
+ priv->workaround = 1;
+ } else {
+ if (priv->workaround) {
+ priv->workaround++;
+ if (priv->workaround > 1)
+ ast_uart_set_sdma_time_out(0);
+ else
+ ast_uart_set_sdma_time_out(0xffff);
+ }
+ }
+ add_timer(&up->rx_timer);
+}
+#endif
+
+/*
+ * FIFO support.
+ */
+static inline void ast25xx_uart_clear_fifos(struct uart_8250_port *p)
+{
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(p, UART_FCR,
+ UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(p, UART_FCR, 0);
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port.
+ */
+static void autoconfig(struct uart_8250_port *up)
+{
+ unsigned long flags;
+
+ pr_debug("line[%d]\n", up->port.line);
+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+ return;
+
+ pr_debug("ttyDMA%d : autoconf (0x%04lx, 0x%p) : ", up->port.line,
+ up->port.iobase, up->port.membase);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->capabilities = 0;
+ up->bugs = 0;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+
+ /*
+ * Reset the UART.
+ */
+ ast25xx_uart_clear_fifos(up);
+ ast_serial_in(up, UART_RX);
+ serial_outp(up, UART_IER, 0);
+
+out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ pr_debug("type=%s\n", uart_config[up->port.type].name);
+}
+
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ ast_serial_out(p, UART_IER, p->ier);
+ }
+}
+
+static void ast25xx_uart_stop_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+
+ pr_debug("line[%d]\n", up->port.line);
+ __stop_tx(up);
+}
+
+static void transmit_chars(struct uart_8250_port *up);
+
+static void ast25xx_uart_start_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ struct ast_uart_priv_data *priv = up->port.private_data;
+
+ pr_debug("line[%d]\n", port->line);
+ tasklet_schedule(&priv->tx_tasklet);
+}
+
+static void ast25xx_uart_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+
+ pr_debug("line[%d]\n", port->line);
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ ast_serial_out(up, UART_IER, up->ier);
+}
+
+static void ast25xx_uart_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+
+ pr_debug("line[%d]\n", port->line);
+ up->ier |= UART_IER_MSI;
+ ast_serial_out(up, UART_IER, up->ier);
+}
+
+static void transmit_chars(struct uart_8250_port *up)
+{
+ struct circ_buf *xmit = &up->port.state->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_tx_stopped(&up->port)) {
+ ast25xx_uart_stop_tx(&up->port);
+ return;
+ }
+ if (uart_circ_empty(xmit)) {
+ __stop_tx(up);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ ast_serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ __stop_tx(up);
+}
+
+static unsigned int check_modem_status(struct uart_8250_port *up)
+{
+ unsigned int status = ast_serial_in(up, UART_MSR);
+
+ pr_debug("line[%d]\n", up->port.line);
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI
+ && up->port.state != NULL) {
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port,
+ status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port,
+ status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
+ }
+
+ return status;
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void ast25xx_uart_handle_port(struct uart_8250_port *up)
+{
+ unsigned int status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status = serial_inp(up, UART_LSR);
+
+ pr_debug("status = %x\n", status);
+
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ */
+static irqreturn_t ast_uart_interrupt(int irq, void *dev_id)
+{
+ struct irq_info *i = dev_id;
+ int pass_counter = 0, handled = 0, end = 0;
+
+ pr_debug("(%d)-", irq);
+ spin_lock(&i->lock);
+
+ do {
+ struct uart_8250_port *up;
+ unsigned int iir;
+
+ up = (struct uart_8250_port *)(i->up);
+
+ iir = ast_serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ ast25xx_uart_handle_port(up);
+ handled = 1;
+
+ } else
+ end = 1;
+
+ if (pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ pr_err("ast-uart-dma:too much work for irq%d\n", irq);
+ break;
+ }
+ } while (end);
+
+ spin_unlock(&i->lock);
+
+ pr_debug("-(%d)\n", irq);
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int ast25xx_uart_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ unsigned long flags;
+ unsigned int lsr;
+
+ pr_debug("line[%d]\n", up->port.line);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ lsr = ast_serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int ast25xx_uart_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ unsigned int status;
+ unsigned int ret;
+
+ status = check_modem_status(up);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void ast25xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ unsigned char mcr = 0;
+
+ mctrl = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ ast_serial_out(up, UART_MCR, mcr);
+
+}
+
+static void ast25xx_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ ast_serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int ast25xx_uart_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ // TX DMA
+ struct circ_buf *xmit = &up->port.state->xmit;
+ struct ast_uart_priv_data *priv = up->port.private_data;
+ unsigned long flags;
+ unsigned char lsr, iir;
+ int retval;
+ int irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+
+ priv->up = up;
+ pr_debug("line[%d]\n", port->line);
+ up->capabilities = uart_config[up->port.type].flags;
+ up->mcr = 0;
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ ast25xx_uart_clear_fifos(up);
+ /*
+ * Clear the interrupt registers.
+ */
+ (void)serial_inp(up, UART_LSR);
+ (void)serial_inp(up, UART_RX);
+ (void)serial_inp(up, UART_IIR);
+ (void)serial_inp(up, UART_MSR);
+
+ ast_uart_irq[0].up = up;
+ retval = request_irq(up->port.irq, ast_uart_interrupt, irq_flags,
+ "ast-uart-dma", ast_uart_irq);
+ if (retval)
+ return retval;
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl |= TIOCM_OUT2;
+
+ ast25xx_uart_set_mctrl(&up->port, up->port.mctrl);
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_outp(up, UART_IER, UART_IER_THRI);
+ lsr = ast_serial_in(up, UART_LSR);
+ iir = ast_serial_in(up, UART_IIR);
+ serial_outp(up, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ pr_debug("ttyDMA%d-enabling bad tx status\n",
+ port->line);
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_inp(up, UART_LSR);
+ serial_inp(up, UART_RX);
+ serial_inp(up, UART_IIR);
+ serial_inp(up, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ // RX DMA
+ priv->rx_dma_buf.head = 0;
+ priv->rx_dma_buf.tail = 0;
+ up->port.icount.rx = 0;
+
+ priv->tx_done = 1;
+ priv->tx_count = 0;
+
+ priv->rx_dma_buf.head = 0;
+ priv->rx_dma_buf.tail = 0;
+#ifdef SDDMA_RX_FIX
+#else
+ priv->workaround = 0;
+#endif
+ // pr_debug("Sending trigger for % x\n", priv->dma_ch);
+ ast_uart_rx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_STOP);
+ ast_uart_rx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_TRIGGER);
+#ifdef SDDMA_RX_FIX
+#else
+ add_timer(&priv->rx_timer);
+#endif
+ priv->tx_dma_buf.head = 0;
+ priv->tx_dma_buf.tail = 0;
+ priv->tx_dma_buf.buf = xmit->buf;
+
+ pr_debug("head:0x%x tail:0x%x\n", xmit->head, xmit->tail);
+ xmit->head = 0;
+ xmit->tail = 0;
+
+ priv->dma_tx_addr = dma_map_single(port->dev, priv->tx_dma_buf.buf,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+ ast_uart_tx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_STOP);
+ ast_uart_tx_sdma_enqueue(priv->dma_ch, priv->dma_tx_addr);
+ ast_uart_tx_sdma_update(priv->dma_ch, 0);
+ ast_uart_tx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_TRIGGER);
+ return 0;
+}
+
+static void ast25xx_uart_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ struct ast_uart_priv_data *priv = up->port.private_data;
+ unsigned long flags;
+
+ pr_debug("line[%d]\n", port->line);
+ priv->up = NULL;
+
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ ast25xx_uart_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ ast_serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ ast25xx_uart_clear_fifos(up);
+
+ (void)ast_serial_in(up, UART_RX);
+
+ ast_uart_rx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_PAUSE);
+ ast_uart_tx_sdma_ctrl(priv->dma_ch, AST_UART_DMAOP_PAUSE);
+#ifdef SDDMA_RX_FIX
+#else
+ del_timer_sync(&up->rx_timer);
+#endif
+
+ // Tx buffer will free by serial_core.c
+ free_irq(up->port.irq, ast_uart_irq);
+}
+
+static unsigned int ast25xx_uart_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ unsigned int quot;
+
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+static void ast25xx_uart_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+ quot = ast25xx_uart_get_divisor(port, baud);
+
+ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = uart_config[up->port.type].fcr;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ ast_serial_out(up, UART_IER, up->ier);
+
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+
+ serial_dl_write(up, quot);
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ ast25xx_uart_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+
+/*
+ * Resource handling.
+ */
+static int ast25xx_uart_request_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+ int ret = 0;
+
+ if (!up->port.mapbase)
+ return ret;
+
+ if (!request_mem_region(up->port.mapbase, size, "ast-uart-dma")) {
+ ret = -EBUSY;
+ return ret;
+ }
+
+ if (up->port.flags & UPF_IOREMAP) {
+ up->port.membase = ioremap_nocache(up->port.mapbase, size);
+ if (!up->port.membase) {
+ release_mem_region(up->port.mapbase, size);
+ ret = -ENOMEM;
+ return ret;
+ }
+ }
+ return ret;
+}
+
+static void ast25xx_uart_release_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+
+ if (!up->port.mapbase)
+ return;
+
+ if (up->port.flags & UPF_IOREMAP) {
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+ }
+
+ release_mem_region(up->port.mapbase, size);
+}
+
+static void ast25xx_uart_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+
+ ast25xx_uart_release_std_resource(up);
+}
+
+static int ast25xx_uart_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ int ret;
+
+ ret = ast25xx_uart_request_std_resource(up);
+ if (ret == 0)
+ ast25xx_uart_release_std_resource(up);
+
+ return ret;
+}
+
+static void ast25xx_uart_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up = to_uart_8250_port(port);
+ int ret;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = ast25xx_uart_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up);
+
+ if (up->port.type == PORT_UNKNOWN)
+ ast25xx_uart_release_std_resource(up);
+}
+
+static int ast25xx_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ return 0;
+}
+
+static const char *ast25xx_uart_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+
+
+static unsigned int ast25xx_uart_serial_in(struct uart_port *port, int offset)
+{
+ offset = offset << port->regshift;
+ return readb(port->membase + offset);
+
+}
+
+
+static void ast25xx_uart_serial_out(struct uart_port *port,
+ int offset, int value)
+{
+ offset = offset << port->regshift;
+ writeb(value, port->membase + offset);
+}
+
+static const struct uart_ops ast25xx_uart_pops = {
+ .tx_empty = ast25xx_uart_tx_empty,
+ .set_mctrl = ast25xx_uart_set_mctrl,
+ .get_mctrl = ast25xx_uart_get_mctrl,
+ .stop_tx = ast25xx_uart_stop_tx,
+ .start_tx = ast25xx_uart_start_tx,
+ .stop_rx = ast25xx_uart_stop_rx,
+ .enable_ms = ast25xx_uart_enable_ms,
+ .break_ctl = ast25xx_uart_break_ctl,
+ .startup = ast25xx_uart_startup,
+ .shutdown = ast25xx_uart_shutdown,
+ .set_termios = ast25xx_uart_set_termios,
+ .type = ast25xx_uart_type,
+ .release_port = ast25xx_uart_release_port,
+ .request_port = ast25xx_uart_request_port,
+ .config_port = ast25xx_uart_config_port,
+ .verify_port = ast25xx_uart_verify_port,
+};
+
+
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+struct clk *clk;
+
+static int ast25xx_uart_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct ast_uart_priv_data *priv;
+ struct uart_8250_port port_8250;
+ struct uart_8250_port *up;
+ int ret;
+ u32 read, dma_channel = 0;
+ struct resource *res;
+
+ if (UART_XMIT_SIZE > DMA_BUFF_SIZE)
+ pr_debug("UART_XMIT_SIZE > DMA_BUFF_SIZE : Please Check\n");
+
+ priv = (struct ast_uart_priv_data *)devm_kzalloc(&pdev->dev,
+ sizeof(struct ast_uart_priv_data), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ up = &port_8250;
+ memset(up, 0, sizeof(struct uart_8250_port));
+ up->port.flags = UPF_IOREMAP;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "IRQ resource not found");
+ return -ENODEV;
+ }
+ up->port.irq = res->start;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Register base not found");
+ return -ENODEV;
+ }
+ up->port.mapbase = res->start;
+
+ ret = ast25xx_uart_request_std_resource(up);
+ if (ret) {
+ dev_err(&pdev->dev, "ioremap_nocache Failed");
+ return ret;
+ }
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ dev_err(&pdev->dev, "missing controller clock");
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ dev_err(&pdev->dev, "failed to enable DMA UART Clk");
+
+ up->port.uartclk = clk_get_rate(clk);
+
+ if (of_property_read_u32(np, "reg-shift", &read) == 0)
+ up->port.regshift = read;
+ if (of_property_read_u32(np, "dma-channel", &read) == 0) {
+ dma_channel = read;
+ priv->dma_ch = dma_channel;
+ }
+ up->port.iotype = UPIO_MEM;
+ up->port.flags |= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
+ up->port.dev = &pdev->dev;
+ if (share_irqs)
+ up->port.flags |= UPF_SHARE_IRQ;
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->port.type = PORT_16550;
+ up->port.iotype = UPIO_MEM;
+ up->port.flags = UPF_FIXED_TYPE;
+ up->port.startup = ast25xx_uart_startup;
+ up->port.shutdown = ast25xx_uart_shutdown;
+ up->port.set_termios = ast25xx_uart_set_termios;
+ up->port.set_mctrl = ast25xx_uart_set_mctrl;
+ up->port.serial_in = ast25xx_uart_serial_in;
+ up->port.serial_out = ast25xx_uart_serial_out;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+ up->capabilities |= UART_CAP_FIFO;
+
+ up->port.private_data = priv;
+
+ ret = serial8250_register_8250_port(up);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "unable to registr port (IO%lx MEM%llx IRQ%d):%d\n",
+ up->port.iobase, (unsigned long long)up->port.mapbase,
+ up->port.irq, ret);
+ return ret;
+ }
+ priv->line = ret;
+
+ tasklet_init(&priv->tx_tasklet, ast_uart_tx_sdma_tasklet_func,
+ (unsigned long)priv);
+#ifdef SDDMA_RX_FIX
+ tasklet_init(&priv->rx_tasklet, ast_uart_rx_sdma_tasklet_func,
+ (unsigned long)priv);
+#else
+ uart->rx_timer.data = (unsigned long)port;
+ uart->rx_timer.expires = jiffies + (HZ);
+ uart->rx_timer.function = ast_uart_rx_timer_func;
+ init_timer(&priv->rx_timer);
+#endif
+
+//DMA request
+#ifdef SDDMA_RX_FIX
+ priv->rx_dma_buf.buf =
+ ast_uart_rx_sdma_request(priv->dma_ch, ast_uart_rx_buffdone,
+ priv);
+ if (priv->rx_dma_buf.buf < 0) {
+ pr_debug("Error : failed to get rx dma channel[%d]\n",
+ priv->dma_ch);
+ return -EBUSY;
+}
+#else
+ priv->rx_dma_buf.buf = ast_uart_rx_sdma_request(
+ priv->dma_ch, priv);
+ if (priv->rx_dma_buf.buf < 0) {
+ pr_debug("Error : failed to get rx dma channel[%d]\n",
+ priv->dma_ch);
+ return -EBUSY;
+ }
+#endif
+ if (ast_uart_tx_sdma_request(
+ priv->dma_ch, ast_uart_tx_buffdone, priv) < 0) {
+ pr_debug("Error : failed to get tx dma channel[%d]\n",
+ priv->dma_ch);
+ return -EBUSY;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int ast25xx_uart_remove(struct platform_device *pdev)
+{
+ struct ast_uart_priv_data *priv;
+
+ priv = platform_get_drvdata(pdev);
+ serial8250_unregister_port(priv->line);
+ return 0;
+}
+
+static int ast25xx_uart_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ast_uart_priv_data *priv;
+
+ priv = platform_get_drvdata(pdev);
+ serial8250_suspend_port(priv->line);
+ return 0;
+}
+
+static int ast25xx_uart_resume(struct platform_device *pdev)
+{
+ struct ast_uart_priv_data *priv;
+
+ priv = platform_get_drvdata(pdev);
+ serial8250_resume_port(priv->line);
+ return 0;
+}
+
+static const struct of_device_id ast_serial_dt_ids[] = {
+ { .compatible = "aspeed,ast-sdma-uart", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver ast25xx_uart_driver = {
+ .probe = ast25xx_uart_probe,
+ .remove = ast25xx_uart_remove,
+ .suspend = ast25xx_uart_suspend,
+ .resume = ast25xx_uart_resume,
+ .driver = {
+ .name = "ast-uart-dma",
+ .of_match_table = of_match_ptr(ast_serial_dt_ids),
+ },
+};
+
+static int __init ast_uart_init(void)
+{
+ int ret;
+
+ if (nr_uarts > UART_DMA_NR)
+ nr_uarts = UART_DMA_NR;
+
+ ret = ast_uart_sdma_probe();
+ if (ret) {
+ pr_debug("ast_uart_sdma_probe Failed ret = %d\n", ret);
+ goto out;
+ }
+ pr_debug("UART driver with DMA%d ports IRQ sharing %sabled\n",
+ nr_uarts, share_irqs ? "en" : "dis");
+
+ spin_lock_init(&ast_uart_irq[0].lock);
+
+ ret = platform_driver_register(&ast25xx_uart_driver);
+ if (ret == 0)
+ goto out;
+
+out:
+ return ret;
+}
+
+static void __exit ast_uart_exit(void)
+{
+
+ platform_driver_unregister(&ast25xx_uart_driver);
+
+}
+module_init(ast_uart_init);
+module_exit(ast_uart_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AST DMA serial driver");
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
--
2.17.1