[PATCH 6/9] drm: meson: venc: use proper macros instead of magic constants

From: Julien Masson
Date: Mon Jun 24 2019 - 10:49:01 EST


This patch add new macros which are used to set the following
registers:
- ENCI_CFILT_CTRL
- ENCI_CFILT_CTRL2
- ENCI_MACV_MAX_AMP
- ENCI_VIDEO_MODE_ADV
- ENCI_VFIFO2VD_CTL
- ENCI_VIDEO_EN
- ENCP_VIDEO_MODE
- VPU_HDMI_SETTING
- VENC_UPSAMPLE_CTRL0
- VENC_UPSAMPLE_CTRL1
- VENC_UPSAMPLE_CTRL2
- VENC_VDAC_FIFO_CTRL
- VENC_VDAC_DAC0_FILT_CTRL0
- VENC_INTCTRL

Signed-off-by: Julien Masson <jmasson@xxxxxxxxxxxx>
---
drivers/gpu/drm/meson/meson_registers.h | 51 ++++++++
drivers/gpu/drm/meson/meson_venc.c | 155 +++++++++++++++++++-----
drivers/gpu/drm/meson/meson_venc_cvbs.c | 3 +-
3 files changed, 177 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 7a52aac7e28a..537a779492bd 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -742,6 +742,25 @@
#define VENC_UPSAMPLE_CTRL0 0x1b64
#define VENC_UPSAMPLE_CTRL1 0x1b65
#define VENC_UPSAMPLE_CTRL2 0x1b66
+#define VENC_UPSAMPLE_CTRL_F0_2_CLK_RATIO BIT(0)
+#define VENC_UPSAMPLE_CTRL_F1_EN BIT(5)
+#define VENC_UPSAMPLE_CTRL_F1_UPSAMPLE_EN BIT(6)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_HIGH_LUMA (0x0 << 12)
+#define VENC_UPSAMPLE_CTRL_CVBS (0x1 << 12)
+#define VENC_UPSAMPLE_CTRL_S_VIDEO_LUMA (0x2 << 12)
+#define VENC_UPSAMPLE_CTRL_S_VIDEO_CHROMA (0x3 << 12)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_PB (0x4 << 12)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_PR (0x5 << 12)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_R (0x6 << 12)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_G (0x7 << 12)
+#define VENC_UPSAMPLE_CTRL_INTERLACE_B (0x8 << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_Y (0x9 << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_PB (0xa << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_PR (0xb << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_R (0xc << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_G (0xd << 12)
+#define VENC_UPSAMPLE_CTRL_PROGRESSIVE_B (0xe << 12)
+#define VENC_UPSAMPLE_CTRL_VDAC_TEST_VALUE (0xf << 12)
#define TCON_INVERT_CTL 0x1b67
#define VENC_VIDEO_PROG_MODE 0x1b68
#define VENC_ENCI_LINE 0x1b69
@@ -750,6 +769,7 @@
#define VENC_ENCP_PIXEL 0x1b6c
#define VENC_STATA 0x1b6d
#define VENC_INTCTRL 0x1b6e
+#define VENC_INTCTRL_ENCI_LNRST_INT_EN BIT(1)
#define VENC_INTFLAG 0x1b6f
#define VENC_VIDEO_TST_EN 0x1b70
#define VENC_VIDEO_TST_MDSEL 0x1b71
@@ -760,6 +780,7 @@
#define VENC_VIDEO_TST_CLRBAR_WIDTH 0x1b76
#define VENC_VIDEO_TST_VDCNT_STSET 0x1b77
#define VENC_VDAC_DACSEL0 0x1b78
+#define VENC_VDAC_SEL_ATV_DMD BIT(5)
#define VENC_VDAC_DACSEL1 0x1b79
#define VENC_VDAC_DACSEL2 0x1b7a
#define VENC_VDAC_DACSEL3 0x1b7b
@@ -780,6 +801,7 @@
#define VENC_VDAC_DAC5_GAINCTRL 0x1bfa
#define VENC_VDAC_DAC5_OFFSET 0x1bfb
#define VENC_VDAC_FIFO_CTRL 0x1bfc
+#define VENC_VDAC_FIFO_EN_ENCI_ENABLE BIT(13)
#define ENCL_TCON_INVERT_CTL 0x1bfd
#define ENCP_VIDEO_EN 0x1b80
#define ENCP_VIDEO_SYNC_MODE 0x1b81
@@ -795,6 +817,7 @@
#define ENCP_VIDEO_SYNC_OFFST 0x1b8b
#define ENCP_VIDEO_MACV_OFFST 0x1b8c
#define ENCP_VIDEO_MODE 0x1b8d
+#define ENCP_VIDEO_MODE_DE_V_HIGH BIT(14)
#define ENCP_VIDEO_MODE_ADV 0x1b8e
#define ENCP_DBG_PX_RST 0x1b90
#define ENCP_DBG_LN_RST 0x1b91
@@ -873,6 +896,11 @@
#define C656_FS_LNED 0x1be7
#define ENCI_VIDEO_MODE 0x1b00
#define ENCI_VIDEO_MODE_ADV 0x1b01
+#define ENCI_VIDEO_MODE_ADV_DMXMD(val) (val & 0x3)
+#define ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 BIT(2)
+#define ENCI_VIDEO_MODE_ADV_YBW_MEDIUM (0 << 4)
+#define ENCI_VIDEO_MODE_ADV_YBW_LOW (0x1 << 4)
+#define ENCI_VIDEO_MODE_ADV_YBW_HIGH (0x2 << 4)
#define ENCI_VIDEO_FSC_ADJ 0x1b02
#define ENCI_VIDEO_BRIGHT 0x1b03
#define ENCI_VIDEO_CONT 0x1b04
@@ -943,13 +971,17 @@
#define ENCI_DBG_MAXPX 0x1b4c
#define ENCI_DBG_MAXLN 0x1b4d
#define ENCI_MACV_MAX_AMP 0x1b50
+#define ENCI_MACV_MAX_AMP_ENABLE_CHANGE BIT(15)
+#define ENCI_MACV_MAX_AMP_VAL(val) (val & 0x83ff)
#define ENCI_MACV_PULSE_LO 0x1b51
#define ENCI_MACV_PULSE_HI 0x1b52
#define ENCI_MACV_BKP_MAX 0x1b53
#define ENCI_CFILT_CTRL 0x1b54
+#define ENCI_CFILT_CMPT_SEL_HIGH BIT(1)
#define ENCI_CFILT7 0x1b55
#define ENCI_YC_DELAY 0x1b56
#define ENCI_VIDEO_EN 0x1b57
+#define ENCI_VIDEO_EN_ENABLE BIT(0)
#define ENCI_DVI_HSO_BEGIN 0x1c00
#define ENCI_DVI_HSO_END 0x1c01
#define ENCI_DVI_VSO_BLINE_EVN 0x1c02
@@ -961,6 +993,10 @@
#define ENCI_DVI_VSO_END_EVN 0x1c08
#define ENCI_DVI_VSO_END_ODD 0x1c09
#define ENCI_CFILT_CTRL2 0x1c0a
+#define ENCI_CFILT_CMPT_CR_DLY(delay) (delay & 0xf)
+#define ENCI_CFILT_CMPT_CB_DLY(delay) ((delay & 0xf) << 4)
+#define ENCI_CFILT_CVBS_CR_DLY(delay) ((delay & 0xf) << 8)
+#define ENCI_CFILT_CVBS_CB_DLY(delay) ((delay & 0xf) << 12)
#define ENCI_DACSEL_0 0x1c0b
#define ENCI_DACSEL_1 0x1c0c
#define ENCP_DACSEL_0 0x1c0d
@@ -975,6 +1011,8 @@
#define ENCI_TST_CLRBAR_WIDTH 0x1c16
#define ENCI_TST_VDCNT_STSET 0x1c17
#define ENCI_VFIFO2VD_CTL 0x1c18
+#define ENCI_VFIFO2VD_CTL_ENABLE BIT(0)
+#define ENCI_VFIFO2VD_CTL_VD_SEL(val) ((val & 0xff) << 8)
#define ENCI_VFIFO2VD_PIXEL_START 0x1c19
#define ENCI_VFIFO2VD_PIXEL_END 0x1c1a
#define ENCI_VFIFO2VD_LINE_TOP_START 0x1c1b
@@ -1037,6 +1075,7 @@
#define VENC_VDAC_DAC5_FILT_CTRL0 0x1c56
#define VENC_VDAC_DAC5_FILT_CTRL1 0x1c57
#define VENC_VDAC_DAC0_FILT_CTRL0 0x1c58
+#define VENC_VDAC_DAC0_FILT_CTRL0_EN BIT(0)
#define VENC_VDAC_DAC0_FILT_CTRL1 0x1c59
#define VENC_VDAC_DAC1_FILT_CTRL0 0x1c5a
#define VENC_VDAC_DAC1_FILT_CTRL1 0x1c5b
@@ -1442,6 +1481,18 @@
#define VIU2_SEL_VENC_ENCP (2 << 2)
#define VIU2_SEL_VENC_ENCT (3 << 2)
#define VPU_HDMI_SETTING 0x271b
+#define VPU_HDMI_ENCI_DATA_TO_HDMI BIT(0)
+#define VPU_HDMI_ENCP_DATA_TO_HDMI BIT(1)
+#define VPU_HDMI_INV_HSYNC BIT(2)
+#define VPU_HDMI_INV_VSYNC BIT(3)
+#define VPU_HDMI_OUTPUT_CRYCB (0 << 5)
+#define VPU_HDMI_OUTPUT_YCBCR (1 << 5)
+#define VPU_HDMI_OUTPUT_YCRCB (2 << 5)
+#define VPU_HDMI_OUTPUT_CBCRY (3 << 5)
+#define VPU_HDMI_OUTPUT_CBYCR (4 << 5)
+#define VPU_HDMI_OUTPUT_CRCBY (5 << 5)
+#define VPU_HDMI_WR_RATE(rate) (((rate & 0x1f) - 1) << 8)
+#define VPU_HDMI_RD_RATE(rate) (((rate & 0x1f) - 1) << 12)
#define ENCI_INFO_READ 0x271c
#define ENCP_INFO_READ 0x271d
#define ENCT_INFO_READ 0x271e
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c
index 7b7a0d8d737c..918df02d2aef 100644
--- a/drivers/gpu/drm/meson/meson_venc.c
+++ b/drivers/gpu/drm/meson/meson_venc.c
@@ -976,6 +976,7 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
unsigned int eof_lines;
unsigned int sof_lines;
unsigned int vsync_lines;
+ u32 reg;

/* Use VENCI for 480i and 576i and double HDMI pixels */
if (mode->flags & DRM_MODE_FLAG_DBLCLK) {
@@ -1048,8 +1049,11 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
unsigned int lines_f1;

/* CVBS Filter settings */
- writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
- writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+ writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+ priv->io_base + _REG(ENCI_CFILT_CTRL));
+ writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+ ENCI_CFILT_CMPT_CB_DLY(1),
+ priv->io_base + _REG(ENCI_CFILT_CTRL2));

/* Digital Video Select : Interlace, clk27 clk, external */
writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1071,8 +1075,9 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));

/* Macrovision max amplitude change */
- writel_relaxed(vmode->enci.macv_max_amp,
- priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+ writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+ ENCI_MACV_MAX_AMP_VAL(vmode->enci.macv_max_amp),
+ priv->io_base + _REG(ENCI_MACV_MAX_AMP));

/* Video mode */
writel_relaxed(vmode->enci.video_prog_mode,
@@ -1088,7 +1093,10 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
* Bypass luma low pass filter
* No macrovision on CSYNC
*/
- writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+ writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+ ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+ ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+ priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));

writel(vmode->enci.sch_adjust,
priv->io_base + _REG(ENCI_VIDEO_SCH));
@@ -1104,8 +1112,17 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
/* UNreset Interlaced TV Encoder */
writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));

- /* Enable Vfifo2vd, Y_Cb_Y_Cr select */
- writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+ /*
+ * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+ * Corresponding value:
+ * Y => 00 or 10
+ * Cb => 01
+ * Cr => 11
+ * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+ */
+ writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+ ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+ priv->io_base + _REG(ENCI_VFIFO2VD_CTL));

/* Timings */
writel_relaxed(vmode->enci.pixel_start,
@@ -1127,7 +1144,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);

/* Interlace video enable */
- writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+ writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+ priv->io_base + _REG(ENCI_VIDEO_EN));

lines_f0 = mode->vtotal >> 1;
lines_f1 = lines_f0 + 1;
@@ -1374,7 +1392,8 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
writel_relaxed(1, priv->io_base + _REG(ENCP_VIDEO_EN));

/* Set DE signalâs polarity is active high */
- writel_bits_relaxed(BIT(14), BIT(14),
+ writel_bits_relaxed(ENCP_VIDEO_MODE_DE_V_HIGH,
+ ENCP_VIDEO_MODE_DE_V_HIGH,
priv->io_base + _REG(ENCP_VIDEO_MODE));

/* Program DE timing */
@@ -1493,13 +1512,39 @@ void meson_venc_hdmi_mode_set(struct meson_drm *priv, int vic,
meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCP);
}

- writel_relaxed((use_enci ? 1 : 2) |
- (mode->flags & DRM_MODE_FLAG_PHSYNC ? 1 << 2 : 0) |
- (mode->flags & DRM_MODE_FLAG_PVSYNC ? 1 << 3 : 0) |
- 4 << 5 |
- (venc_repeat ? 1 << 8 : 0) |
- (hdmi_repeat ? 1 << 12 : 0),
- priv->io_base + _REG(VPU_HDMI_SETTING));
+ /* Set VPU HDMI setting */
+ /* Select ENCP or ENCI data to HDMI */
+ if (use_enci)
+ reg = VPU_HDMI_ENCI_DATA_TO_HDMI;
+ else
+ reg = VPU_HDMI_ENCP_DATA_TO_HDMI;
+
+ /* Invert polarity of HSYNC from VENC */
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ reg |= VPU_HDMI_INV_HSYNC;
+
+ /* Invert polarity of VSYNC from VENC */
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ reg |= VPU_HDMI_INV_VSYNC;
+
+ /* Output data format: CbYCr */
+ reg |= VPU_HDMI_OUTPUT_CBYCR;
+
+ /*
+ * Write rate to the async FIFO between VENC and HDMI.
+ * One write every 2 wr_clk.
+ */
+ if (venc_repeat)
+ reg |= VPU_HDMI_WR_RATE(2);
+
+ /*
+ * Read rate to the async FIFO between VENC and HDMI.
+ * One read every 2 wr_clk.
+ */
+ if (hdmi_repeat)
+ reg |= VPU_HDMI_RD_RATE(2);
+
+ writel_relaxed(reg, priv->io_base + _REG(VPU_HDMI_SETTING));

priv->venc.hdmi_repeat = hdmi_repeat;
priv->venc.venc_repeat = venc_repeat;
@@ -1512,12 +1557,17 @@ EXPORT_SYMBOL_GPL(meson_venc_hdmi_mode_set);
void meson_venci_cvbs_mode_set(struct meson_drm *priv,
struct meson_cvbs_enci_mode *mode)
{
+ u32 reg;
+
if (mode->mode_tag == priv->venc.current_mode)
return;

/* CVBS Filter settings */
- writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL));
- writel_relaxed(0x12, priv->io_base + _REG(ENCI_CFILT_CTRL2));
+ writel_relaxed(ENCI_CFILT_CMPT_SEL_HIGH | 0x10,
+ priv->io_base + _REG(ENCI_CFILT_CTRL));
+ writel_relaxed(ENCI_CFILT_CMPT_CR_DLY(2) |
+ ENCI_CFILT_CMPT_CB_DLY(1),
+ priv->io_base + _REG(ENCI_CFILT_CTRL2));

/* Digital Video Select : Interlace, clk27 clk, external */
writel_relaxed(0, priv->io_base + _REG(VENC_DVI_SETTING));
@@ -1539,8 +1589,9 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
priv->io_base + _REG(ENCI_SYNC_VSO_ODDLN));

/* Macrovision max amplitude change */
- writel_relaxed(0x8100 + mode->macv_max_amp,
- priv->io_base + _REG(ENCI_MACV_MAX_AMP));
+ writel_relaxed(ENCI_MACV_MAX_AMP_ENABLE_CHANGE |
+ ENCI_MACV_MAX_AMP_VAL(mode->macv_max_amp),
+ priv->io_base + _REG(ENCI_MACV_MAX_AMP));

/* Video mode */
writel_relaxed(mode->video_prog_mode,
@@ -1556,7 +1607,10 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
* Bypass luma low pass filter
* No macrovision on CSYNC
*/
- writel_relaxed(0x26, priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));
+ writel_relaxed(ENCI_VIDEO_MODE_ADV_DMXMD(2) |
+ ENCI_VIDEO_MODE_ADV_VBICTL_LINE_17_22 |
+ ENCI_VIDEO_MODE_ADV_YBW_HIGH,
+ priv->io_base + _REG(ENCI_VIDEO_MODE_ADV));

writel(mode->sch_adjust, priv->io_base + _REG(ENCI_VIDEO_SCH));

@@ -1588,16 +1642,50 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
/* UNreset Interlaced TV Encoder */
writel_relaxed(0, priv->io_base + _REG(ENCI_DBG_PX_RST));

- /* Enable Vfifo2vd, Y_Cb_Y_Cr select */
- writel_relaxed(0x4e01, priv->io_base + _REG(ENCI_VFIFO2VD_CTL));
+ /*
+ * Enable Vfifo2vd and set Y_Cb_Y_Cr:
+ * Corresponding value:
+ * Y => 00 or 10
+ * Cb => 01
+ * Cr => 11
+ * Ex: 0x4e => 01001110 would mean Cb/Y/Cr/Y
+ */
+ writel_relaxed(ENCI_VFIFO2VD_CTL_ENABLE |
+ ENCI_VFIFO2VD_CTL_VD_SEL(0x4e),
+ priv->io_base + _REG(ENCI_VFIFO2VD_CTL));

/* Power UP Dacs */
writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_SETTING));

/* Video Upsampling */
- writel_relaxed(0x0061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
- writel_relaxed(0x4061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
- writel_relaxed(0x5061, priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));
+ /*
+ * CTRL0, CTRL1 and CTRL2:
+ * Filter0: input data sample every 2 cloks
+ * Filter1: filtering and upsample enable
+ */
+ reg = VENC_UPSAMPLE_CTRL_F0_2_CLK_RATIO | VENC_UPSAMPLE_CTRL_F1_EN |
+ VENC_UPSAMPLE_CTRL_F1_UPSAMPLE_EN;
+
+ /*
+ * Upsample CTRL0:
+ * Interlace High Bandwidth Luma
+ */
+ writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_HIGH_LUMA | reg,
+ priv->io_base + _REG(VENC_UPSAMPLE_CTRL0));
+
+ /*
+ * Upsample CTRL1:
+ * Interlace Pb
+ */
+ writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PB | reg,
+ priv->io_base + _REG(VENC_UPSAMPLE_CTRL1));
+
+ /*
+ * Upsample CTRL2:
+ * Interlace R
+ */
+ writel_relaxed(VENC_UPSAMPLE_CTRL_INTERLACE_PR | reg,
+ priv->io_base + _REG(VENC_UPSAMPLE_CTRL2));

/* Select Interlace Y DACs */
writel_relaxed(0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
@@ -1611,14 +1699,16 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
meson_vpp_setup_mux(priv, MESON_VIU_VPP_MUX_ENCI);

/* Enable ENCI FIFO */
- writel_relaxed(0x2000, priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));
+ writel_relaxed(VENC_VDAC_FIFO_EN_ENCI_ENABLE,
+ priv->io_base + _REG(VENC_VDAC_FIFO_CTRL));

/* Select ENCI DACs 0, 1, 4, and 5 */
writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_0));
writel_relaxed(0x11, priv->io_base + _REG(ENCI_DACSEL_1));

/* Interlace video enable */
- writel_relaxed(1, priv->io_base + _REG(ENCI_VIDEO_EN));
+ writel_relaxed(ENCI_VIDEO_EN_ENABLE,
+ priv->io_base + _REG(ENCI_VIDEO_EN));

/* Configure Video Saturation / Contrast / Brightness / Hue */
writel_relaxed(mode->video_saturation,
@@ -1631,7 +1721,8 @@ void meson_venci_cvbs_mode_set(struct meson_drm *priv,
priv->io_base + _REG(ENCI_VIDEO_HUE));

/* Enable DAC0 Filter */
- writel_relaxed(0x1, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
+ writel_relaxed(VENC_VDAC_DAC0_FILT_CTRL0_EN,
+ priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL0));
writel_relaxed(0xfc48, priv->io_base + _REG(VENC_VDAC_DAC0_FILT_CTRL1));

/* 0 in Macrovision register 0 */
@@ -1652,7 +1743,8 @@ unsigned int meson_venci_get_field(struct meson_drm *priv)

void meson_venc_enable_vsync(struct meson_drm *priv)
{
- writel_relaxed(2, priv->io_base + _REG(VENC_INTCTRL));
+ writel_relaxed(VENC_INTCTRL_ENCI_LNRST_INT_EN,
+ priv->io_base + _REG(VENC_INTCTRL));
regmap_update_bits(priv->hhi, HHI_GCLK_MPEG2, BIT(25), BIT(25));
}

@@ -1680,7 +1772,8 @@ void meson_venc_init(struct meson_drm *priv)
regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0);

/* Disable HDMI */
- writel_bits_relaxed(0x3, 0,
+ writel_bits_relaxed(VPU_HDMI_ENCI_DATA_TO_HDMI |
+ VPU_HDMI_ENCP_DATA_TO_HDMI, 0,
priv->io_base + _REG(VPU_HDMI_SETTING));

/* Disable all encoders */
diff --git a/drivers/gpu/drm/meson/meson_venc_cvbs.c b/drivers/gpu/drm/meson/meson_venc_cvbs.c
index 6313a519f257..7ecc6bb6c8f8 100644
--- a/drivers/gpu/drm/meson/meson_venc_cvbs.c
+++ b/drivers/gpu/drm/meson/meson_venc_cvbs.c
@@ -172,7 +172,8 @@ static void meson_venc_cvbs_encoder_enable(struct drm_encoder *encoder)
struct meson_drm *priv = meson_venc_cvbs->priv;

/* VDAC0 source is not from ATV */
- writel_bits_relaxed(BIT(5), 0, priv->io_base + _REG(VENC_VDAC_DACSEL0));
+ writel_bits_relaxed(VENC_VDAC_SEL_ATV_DMD, 0,
+ priv->io_base + _REG(VENC_VDAC_DACSEL0));

if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu")) {
regmap_write(priv->hhi, HHI_VDAC_CNTL0, 1);
--
2.17.1