[PATCH v4 00/11] add thermal driver for h6

[Yangtao Li]

This patchset add support for H3 and H6 thermal sensor.

BTY, do a cleanup in thermal makfile.

Yangtao Li (11):
  thermal: sun8i: add thermal driver for h6
  dt-bindings: thermal: add binding document for h6 thermal controller
  thermal: fix indentation in makefile
  thermal: sun8i: get ths sensor number from device compatible
  thermal: sun8i: rework for sun8i_ths_get_temp()
  thermal: sun8i: get ths init func from device compatible
  thermal: sun8i: rework for ths irq handler func
  thermal: sun8i: support ahb clocks
  thermal: sun8i: rework for ths calibrate func
  dt-bindings: thermal: add binding document for h3 thermal controller
  thermal: sun8i: add thermal driver for h3

 .../bindings/thermal/sun8i-thermal.yaml       |  94 +++
 MAINTAINERS                                   |   7 +
 drivers/thermal/Kconfig                       |  14 +
 drivers/thermal/Makefile                      |   9 +-
 drivers/thermal/sun8i_thermal.c               | 534 ++++++++++++++++++
 5 files changed, 654 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
 create mode 100644 drivers/thermal/sun8i_thermal.c

---
v4:
-add h3 support
-fix yaml file
---
2.17.1