Re: [PATCH v5 2/2] DRM: Add KMS driver for the Ingenic JZ47xx SoCs

From: Paul Cercueil
Date: Fri Jun 21 2019 - 05:17:44 EST




Le ven. 21 juin 2019 à 11:13, Daniel Vetter <daniel@xxxxxxxx> a écrit :
On Fri, Jun 21, 2019 at 11:07:30AM +0200, Paul Cercueil wrote:


Le ven. 21 juin 2019 à 11:04, Daniel Vetter <daniel@xxxxxxxx> a écrit :
> On Thu, Jun 20, 2019 at 04:15:59PM +0200, Paul Cercueil wrote:
> >
> >
> > Le mer. 19 juin 2019 à 14:26, Sam Ravnborg <sam@xxxxxxxxxxxx> a
> > écrit :
> > > Hi Paul.
> > >
> > > On Mon, Jun 03, 2019 at 05:23:31PM +0200, Paul Cercueil wrote:
> > > > Add a KMS driver for the Ingenic JZ47xx family of SoCs.
> > > > This driver is meant to replace the aging jz4740-fb driver.
> > > >
> > > > This driver does not make use of the simple pipe helper, for
> > the
> > > > reason
> > > > that it will soon be updated to support more advanced features
> > like
> > > > multiple planes, IPU integration for colorspace conversion and
> > > > up/down
> > > > scaling, support for DSI displays, and TV-out and HDMI outputs.
> > > >
> > > > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> > > > Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
> > > > ---
> > > >
> > > > Notes:
> > > > v2: - Remove custom handling of panel. The panel is now
> > > > discovered using
> > > > the standard API.
> > > > - Lots of small tweaks suggested by upstream
> > > >
> > > > v3: - Use devm_drm_dev_init()
> > > > - Update compatible strings to -lcd instead of -drm
> > > > - Add destroy() callbacks to plane and crtc
> > > > - The ingenic,lcd-mode is now read from the bridge's DT
> > node
> > > >
> > > > v4: Remove ingenic,lcd-mode property completely. The
> > various
> > > > modes are now
> > > > deduced from the connector type, the pixel format or the
> > bus
> > > > flags.
> > > >
> > > > v5: - Fix framebuffer size incorrectly calculated for 24bpp
> > > > framebuffers
> > > > - Use 32bpp framebuffer instead of 16bpp, as it'll work
> > with
> > > > both
> > > > 16-bit and 24-bit panel
> > > > - Get rid of drm_format_plane_cpp() which has been dropped
> > > > upstream
> > > > - Avoid using drm_format_info->depth, which is deprecated.
> > > In the drm world we include the revision notes in the changelog.
> > > So I did this when I applied it to drm-misc-next.
> > >
> > > Fixed a few trivial checkpatch warnings about indent too.
> > > There was a few too-long-lines warnings that I ignored. Fixing
> > them
> > > would have hurt readability.
> >
> > Thanks.
> >
> > > I assume you will maintain this driver onwards from now.
> > > Please request drm-misc commit rights (see
> > > https://www.freedesktop.org/wiki/AccountRequests/)
> > > You will need a legacy SSH account.
> >
> > I requested an account here:
> > https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/162
>
> This 404s for me. Did you set the issue to private by any chance? Or
> deleted already again?
> -Daniel

Sorry, yes, I set it to private. I thought I had to :(

Well I can't ack it if its private, so please change that. Also,
everything is public around here, or almost everything ...
-Daniel

I closed the old one and created a new, public one:
https://gitlab.freedesktop.org/freedesktop/freedesktop/issues/165



> >
> > > And you should familiarize yourself with the maintainer-tools:
> > > https://drm.pages.freedesktop.org/maintainer-tools/index.html
> > >
> > > For my use I use "dim update-branches; dim apply; dim push
> > > So only a small subset i needed for simple use.
> > >
> > > Sam
> >
> >
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch



--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch