Re: [PATCH v3] bus: hisi_lpc: Avoid use-after-free from probe failure

From: John Garry
Date: Mon Jun 17 2019 - 11:09:43 EST


On 17/06/2019 12:15, John Garry wrote:
If, after registering a logical PIO range, the driver probe later fails,
the logical PIO range memory will be released automatically.

This causes an issue, in that the logical PIO range is not unregistered
and the released range memory may be later referenced.

As an interim fix, allocate the logical PIO range with kzalloc() to avoid
this memory being freed.

Further memory will not be leaked from later attempts to probe the
driver, as any attempts to allocate logical PIO ranges will fail, and we
would release the 'range' memory.

The correct fix for this problem would be to tear down what had been setup
during the probe, i.e. unregister the logical PIO range, but this is not
supported.

Support for unregistering logical PIO ranges will need be to added in
future.

Fixes: adf38bb0b5956 ("HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings")
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---


I just realized that there is another bug in this driver, regarding unbinding the driver from the device.

@xuwei, please ignore this patch. I need to fix this all properly, including adding the logical PIO unregister method.

John

Change in v2:
- update commit message

Change to v1:
- add comment, as advised by Joe Perches

diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c
index 19d7b6ff2f17..5f0130a693fe 100644
--- a/drivers/bus/hisi_lpc.c
+++ b/drivers/bus/hisi_lpc.c
@@ -599,7 +599,8 @@ static int hisi_lpc_probe(struct platform_device *pdev)
if (IS_ERR(lpcdev->membase))
return PTR_ERR(lpcdev->membase);

- range = devm_kzalloc(dev, sizeof(*range), GFP_KERNEL);
+ /* Logical PIO may reference 'range' memory even if the probe fails */
+ range = kzalloc(sizeof(*range), GFP_KERNEL);
if (!range)
return -ENOMEM;

@@ -610,6 +611,7 @@ static int hisi_lpc_probe(struct platform_device *pdev)
ret = logic_pio_register_range(range);
if (ret) {
dev_err(dev, "register IO range failed (%d)!\n", ret);
+ kfree(range);
return ret;
}
lpcdev->io_host = range;