RE: [PATCH 0/6] net: macb patch set cover letter

[Parshuram Raju Thombare]

Hi All,

Please ignore patches sent in-reply chain to patch 0001.
Sending all patches in reply to patch 0000-cover-letter.patch.

Regards,
Parshuram Thombare


>-----Original Message-----
>From: Parshuram Thombare <pthombar@xxxxxxxxxxx>
>Sent: Sunday, June 16, 2019 5:15 AM
>To: andrew@xxxxxxx; nicolas.ferre@xxxxxxxxxxxxx; davem@xxxxxxxxxxxxx;
>f.fainelli@xxxxxxxxx
>Cc: netdev@xxxxxxxxxxxxxxx; hkallweit1@xxxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx; Rafal Ciepiela <rafalc@xxxxxxxxxxx>; Anil Joy
>Varughese <aniljoy@xxxxxxxxxxx>; Piotr Sroka <piotrs@xxxxxxxxxxx>;
>Parshuram Raju Thombare <pthombar@xxxxxxxxxxx>
>Subject: [PATCH 0/6] net: macb patch set cover letter
>
>Hello !,
>
>This is second version of patch set containing following patches for Cadence
>ethernet controller driver.
>
>1. 0001-net-macb-add-phylink-support.patch
>   Replace phylib API's with phylink API's.
>2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
>   This patch add support for SGMII mode.
>3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch
>   This patch is to configure TI PHY DP83867 in SGMII mode from
>   our MAC PCI wrapper driver.
>   With this change there is no need of PHY driver and dp83867
>   module must be disabled. Users wanting to setup DP83867 PHY
>   in SGMII mode can disable dp83867.ko driver, else dp83867.ko
>   overwrite this configuration and PHY is setup as per dp83867.ko.
>4. 0004-net-macb-add-support-for-c45-PHY.patch
>   This patch is to support C45 PHY.
>5. 0005-net-macb-add-support-for-high-speed-interface
>   This patch add support for 10G USXGMII PCS in fixed mode.
>   Since emulated PHY used in fixed mode doesn't seems to
>   support anything above 1G, additional parameter is used outside
>   "fixed-link" node for selecting speed and "fixed-link"
>   node speed is still set at 1G.
>6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
>   New parameters added to Cadence ethernet controller DT binding
>   for USXGMII interface.
>
>Regards,
>Parshuram Thombare
>
>Parshuram Thombare (6):
>  net: macb: add phylink support
>  net: macb: add support for sgmii MAC-PHY interface
>  net: macb: add PHY configuration in MACB PCI wrapper
>  net: macb: add support for c45 PHY
>  net: macb: add support for high speed interface
>  net: macb: parameter added to cadence ethernet controller DT binding
>
> .../devicetree/bindings/net/macb.txt          |   4 +
> drivers/net/ethernet/cadence/Kconfig          |   2 +-
> drivers/net/ethernet/cadence/macb.h           | 136 +++-
> drivers/net/ethernet/cadence/macb_main.c      | 659 ++++++++++++++----
> drivers/net/ethernet/cadence/macb_pci.c       | 225 ++++++
> 5 files changed, 860 insertions(+), 166 deletions(-)
>
>--
>2.17.1