Re: [PATCH v1 3/4] ASoC: tda7802: Add enable device attribute

From: Cezary Rojewski
Date: Wed Jun 12 2019 - 13:19:47 EST


On 2019-06-11 19:49, Thomas Preston wrote:
Add a device attribute to control the enable regulator. Write 1 to
enable, 0 to disable (ref-count minus one), or -1 to force disable the
physical pin.

To disable a set of amplifiers wired to the same enable gpio, each
device must be disabled. For example:

echo 0 > /sys/devices/.../device:00/enable
echo 0 > /sys/devices/.../device:01/enable

In an emergency, we can force disable from any device:

echo -1 > /sys/devices/.../device:00/enable

Signed-off-by: Thomas Preston <thomas.preston@xxxxxxxxxxxxxxx>
Cc: Patrick Glaser <pglaser@xxxxxxxxx>
Cc: Rob Duncan <rduncan@xxxxxxxxx>
Cc: Nate Case <ncase@xxxxxxxxx>
---
sound/soc/codecs/tda7802.c | 65 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/tda7802.c b/sound/soc/codecs/tda7802.c
index 38ca52de85f0..62aae011d9f1 100644
--- a/sound/soc/codecs/tda7802.c
+++ b/sound/soc/codecs/tda7802.c
@@ -458,6 +458,42 @@ static struct snd_soc_dai_driver tda7802_dai_driver = {
.ops = &tda7802_dai_ops,
};
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct tda7802_priv *tda7802 = dev_get_drvdata(dev);
+ int enabled = regulator_is_enabled(tda7802->enable_reg) ? 1 : 0;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", enabled);
+}
+
+static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tda7802_priv *tda7802 = dev_get_drvdata(dev);
+ int err;
+
+ if (sysfs_streq(buf, "1")) {
+ err = regulator_enable(tda7802->enable_reg);
+ if (err < 0)
+ dev_err(dev, "Could not enable (sysfs)\n");
+ } else if (sysfs_streq(buf, "0")) {
+ err = regulator_disable(tda7802->enable_reg);
+ if (err < 0)
+ dev_err(dev, "Could not disable (sysfs)\n");
+ } else if (sysfs_streq(buf, "-1")) {
+ err = regulator_force_disable(tda7802->enable_reg);
+ if (err < 0)
+ dev_err(dev, "Could not force disable (sysfs)\n");
+ } else {
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(enable);
+
/* read device tree or ACPI properties from device */
static int tda7802_read_properties(struct tda7802_priv *tda7802)
{
@@ -493,7 +529,34 @@ static int tda7802_read_properties(struct tda7802_priv *tda7802)
return err;
}
-static const struct snd_soc_component_driver tda7802_component_driver;
+static int tda7802_probe(struct snd_soc_component *component)
+{
+ struct tda7802_priv *tda7802 = snd_soc_component_get_drvdata(component);
+ struct device *dev = &tda7802->i2c->dev;
+ int err;
+
+ dev_dbg(dev, "%s\n", __func__);

Function name alone ain't very informational. Is this intended?

+
+ err = device_create_file(dev, &dev_attr_enable);
+ if (err < 0) {
+ dev_err(dev, "Could not create enable attr\n");
+ return err;
+ }

Regardless of outcome, you'll be returning err here. Consider leaving error message alone within if-statement. Remove redundant brackets if you decide to do so.

+
+ return err;
+}
+
+static void tda7802_remove(struct snd_soc_component *component)
+{
+ struct tda7802_priv *tda7802 = snd_soc_component_get_drvdata(component);
+
+ device_remove_file(&tda7802->i2c->dev, &dev_attr_enable);
+}
+
+static const struct snd_soc_component_driver tda7802_component_driver = {
+ .probe = tda7802_probe,
+ .remove = tda7802_remove,
+};
static int tda7802_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)