Re: [PATCH v3 5/5] arm64: dts: qcs404: Add interconnect provider DT nodes

From: Bjorn Andersson
Date: Tue Jun 11 2019 - 19:44:58 EST


On Tue 11 Jun 09:41 PDT 2019, Georgi Djakov wrote:

> Add the DT nodes for the network-on-chip interconnect buses found
> on qcs404-based platforms.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> ---
>
> v3:
> - Updated according to the new binding: added reg property and moved under the
> "soc" node.
>
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index ffedf9640af7..07ff592233b6 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0
> // Copyright (c) 2018, Linaro Limited
>
> +#include <dt-bindings/interconnect/qcom,qcs404.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,gcc-qcs404.h>
> #include <dt-bindings/clock/qcom,rpmcc.h>
> @@ -411,6 +412,33 @@
> #interrupt-cells = <4>;
> };
>
> + bimc: interconnect@400000 {

Please maintain sort order of address, node name, label name. So this
should go between rng@e3000 and remoteproc@b00000.

Other than that:

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

Regards,
Bjorn
> + reg = <0x00400000 0x80000>;
> + compatible = "qcom,qcs404-bimc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + };
> +
> + pcnoc: interconnect@500000 {
> + reg = <0x00500000 0x15080>;
> + compatible = "qcom,qcs404-pcnoc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
> + <&rpmcc RPM_SMD_PNOC_A_CLK>;
> + };
> +
> + snoc: interconnect@580000 {
> + reg = <0x00580000 0x23080>;
> + compatible = "qcom,qcs404-snoc";
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + };
> +
> sdcc1: sdcc@7804000 {
> compatible = "qcom,sdhci-msm-v5";
> reg = <0x07804000 0x1000>, <0x7805000 0x1000>;