[PATCH v3 2/3] i3c: add mixed limited bus mode

From: Vitor Soares
Date: Tue Jun 11 2019 - 10:11:23 EST


The i3c bus spec defines a bus configuration where i2c devices don't
have a 50ns filter but support SCL running at SDR max rate (12.5MHz).

This patch introduces the limited bus mode so that users can use
a higher speed in presence of i2c devices index 1.

Signed-off-by: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
Cc: Boris Brezillon <bbrezillon@xxxxxxxxxx>
Cc: <linux-kernel@xxxxxxxxxxxxxxx>
---
Changes in v3:
None

Changes in v2:
Enhance commit message

drivers/i3c/master.c | 5 +++++
include/linux/i3c/master.h | 5 +++++
2 files changed, 10 insertions(+)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index f8e580e..025925c 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -470,6 +470,7 @@ static int i3c_bus_init(struct i3c_bus *i3cbus)
static const char * const i3c_bus_mode_strings[] = {
[I3C_BUS_MODE_PURE] = "pure",
[I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
+ [I3C_BUS_MODE_MIXED_LIMITED] = "mixed-limited",
[I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
};

@@ -585,6 +586,7 @@ int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
break;
case I3C_BUS_MODE_MIXED_FAST:
+ case I3C_BUS_MODE_MIXED_LIMITED:
if (!i3cbus->scl_rate.i3c)
i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE;
if (!i3cbus->scl_rate.i2c)
@@ -2490,6 +2492,9 @@ int i3c_master_register(struct i3c_master_controller *master,
mode = I3C_BUS_MODE_MIXED_FAST;
break;
case I3C_LVR_I2C_INDEX(1):
+ if (mode < I3C_BUS_MODE_MIXED_LIMITED)
+ mode = I3C_BUS_MODE_MIXED_LIMITED;
+ break;
case I3C_LVR_I2C_INDEX(2):
if (mode < I3C_BUS_MODE_MIXED_SLOW)
mode = I3C_BUS_MODE_MIXED_SLOW;
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index f13fd8b..89ea461 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -250,12 +250,17 @@ struct i3c_device {
* the bus. The only impact in this mode is that the
* high SCL pulse has to stay below 50ns to trick I2C
* devices when transmitting I3C frames
+ * @I3C_BUS_MODE_MIXED_LIMITED: I2C devices without 50ns spike filter are
+ * present on the bus. However they allows
+ * compliance up to the maximum SDR SCL clock
+ * frequency.
* @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present
* on the bus
*/
enum i3c_bus_mode {
I3C_BUS_MODE_PURE,
I3C_BUS_MODE_MIXED_FAST,
+ I3C_BUS_MODE_MIXED_LIMITED,
I3C_BUS_MODE_MIXED_SLOW,
};

--
2.7.4