RE: [PATCH v7 1/6] dt-bindings: add binding for USBSS-DRD controller.

[Peter Chen]

>  - reg-names - register memory area names:
>         "xhci" - for HOST registers space
>         "dev" - for DEVICE registers space
>         "otg" - for OTG/DRD registers space
>  - compatible: Should contain:
>         "cdns,usb3-1.0.0" - for 0x00024502 controller version
>         "cdns,usb3-1.0.1" - for 0x00024509 controller version
>         "cdns,usb3-1.0.2" - for 0x0002450C controller version
>         "cdns,usb3-1.0.3" - for 0x0002450d controller version

If the value can be read from register, why we still need different compatibles?

> Example:
>         usb@f3000000 {
>                 compatible = "cdns,usb3-1.0.1";
>                 interrupts = <GIC_USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>,
>                                 <GIC_USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>,
>                                 <GIC_USB_IRQ  8 IRQ_TYPE_LEVEL_HIGH>;
>                 interrupt-names = "host", "peripheral", "otg";
>                 reg = <0xf3000000 0x10000>,     /* memory area for HOST registers */
>                         <0xf3010000 0x10000>,   /* memory area for DEVICE registers */
>                         <0xf3020000 0x10000>;   /* memory area for OTG/DRD registers
> */
>                 reg-names = "xhci", "dev", "otg";
>                 phys = <&usb3_phy>;
>                 phy-names = "cdns3,usbphy";
> 
> 
> Maybe I should add also something for usb2_phy in dt-binding and in driver ?
> 

The PHY driver is located at: drivers/phy/cadence/phy-cadence-sierra.c.
Will we need another one for USB2 PHY?

Peter


> Thanks,
> Regards,
> Pawel
> 
> >>
> >> Regards,
> >> Pawel
> >>
> >>
> >>>
> >>>> +
> >>>> +Optional properties:
> >>>> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
> >>>> +                   "full-speed"; refer to usb/generic.txt
> >>>> + - dr_mode: Should be one of "host", "peripheral" or "otg".
> >>>> + - phys: reference to the USB PHY
> >>>> +
> >>>> +Example:
> >>>> +	usb@f3000000 {
> >>>> +		compatible = "cdns,usb3-1.0.1";
> >>>> +		interrupts = <USB_IRQ  7 IRQ_TYPE_LEVEL_HIGH>;
> >>>
> >>> This example won't work as code requests for 3 separate interrupts.
> >>>
> >>>> +		reg = <0xf3000000 0x10000	/* memory area for HOST
> registers */
> >>>> +			0xf3010000 0x10000	/* memory area for DEVICE
> registers */
> >>>> +			0xf3020000 0x10000>;	/* memory area for
> OTG/DRD registers */
> >>>> +		reg-names = "xhci", "dev", "otg";
> >>>> +	};
> >>>>
> >>>
> >
> >
> >--
> >cheers,
> >-roger
> >
> >Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> >Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki