Re: [PATCH v2] platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime

From: Guenter Roeck
Date: Fri Jun 07 2019 - 15:40:17 EST


On Fri, Jun 7, 2019 at 12:27 PM Nick Crews <ncrews@xxxxxxxxxxxx> wrote:
>
> Hi!
>
> On Fri, Jun 7, 2019 at 12:03 PM Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
> >
> > On Fri, 2019-06-07 at 12:27 +0200, Enric Balletbo i Serra wrote:
> > > On many boards, communication between the kernel and the Embedded
> > > Controller happens over an LPC bus. In these cases, the kernel config
> > > CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
> > > Microchip Embedded Controller (MEC) that is different from the regular
> > > EC. On these devices, the same LPC bus is used, but the protocol is
> > > a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
> > > config is enabled. Currently, the kernel decides at compile-time whether
> > > or not to use the MEC variant, and, when that kernel option is selected
> > > it breaks the other boards. We would like a kind of runtime detection to
> > > avoid this.
> > >
> > > This patch adds that detection mechanism by probing the protocol at
> > > runtime, first we assume that a MEC variant is connected, and if the
> > > protocol fails it fallbacks to the regular EC. This adds a bit of
> > > overload because we try to read twice on those LPC boards that doesn't
> > > contain a MEC variant, but is a better solution than having to select the
> > > EC variant at compile-time.
> > >
> > > While here also fix the alignment in Kconfig file for this config option
> > > replacing the spaces by tabs.
> > >
> > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> > > ---
> > > Hi,
> > >
> > > This is the second attempt to solve the issue to be able to select at
> > > runtime the CrOS MEC variant. My first thought was check for a device
> > > ID,
> > > the MEC1322 has a register that contains the device ID, however I am not
> > > sure if we can read that register from the host without modifying the
> > > firmware. Also, I am not sure if the MEC1322 is the only device used
> > > that supports that LPC protocol variant, so I ended with a more easy
> > > solution, check if the protocol fails or not. Some background on this
> > > issue can be found [1] and [2]
> > >
> > > The patch has been tested on:
> > > - Acer Chromebook R11 (Cyan - MEC variant)
> > > - Pixel Chromebook 2015 (Samus - non-MEC variant)
> > > - Dell Chromebook 11 (Wolf - non-MEC variant)
> > > - Toshiba Chromebook (Leon - non-MEC variant)
> > >
> > > Nick, could you test the patch for Wilco?
> > >
> > > Best regards,
> > > Enric
> > >
> > > [1] https://bugs.chromium.org/p/chromium/issues/detail?id=932626
> > > [2] https://chromium-review.googlesource.com/c/chromiumos/overlays/chromiumos-overlay/+/1474254
> > >
> > > Changes in v2:
> > > - Remove global bool to indicate the kind of variant as suggested by Ezequiel.
> > > - Create an internal operations struct to allow different variants.
> > >
> > > drivers/platform/chrome/Kconfig | 29 +++------
> > > drivers/platform/chrome/Makefile | 3 +-
> > > drivers/platform/chrome/cros_ec_lpc.c | 76 ++++++++++++++++-------
> > > drivers/platform/chrome/cros_ec_lpc_reg.c | 39 +++---------
> > > drivers/platform/chrome/cros_ec_lpc_reg.h | 26 ++++++++
> > > drivers/platform/chrome/wilco_ec/Kconfig | 2 +-
> > > 6 files changed, 98 insertions(+), 77 deletions(-)
> > >
> > > diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> > > index 2826f7136f65..453e69733842 100644
> > > --- a/drivers/platform/chrome/Kconfig
> > > +++ b/drivers/platform/chrome/Kconfig
> > > @@ -83,28 +83,17 @@ config CROS_EC_SPI
> > > 'pre-amble' bytes before the response actually starts.
> > >
> > > config CROS_EC_LPC
> > > - tristate "ChromeOS Embedded Controller (LPC)"
> > > - depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > > - help
> > > - If you say Y here, you get support for talking to the ChromeOS EC
> > > - over an LPC bus. This uses a simple byte-level protocol with a
> > > - checksum. This is used for userspace access only. The kernel
> > > - typically has its own communication methods.
> > > -
> > > - To compile this driver as a module, choose M here: the
> > > - module will be called cros_ec_lpc.
> > > -
> > > -config CROS_EC_LPC_MEC
> > > - bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
> > > - depends on CROS_EC_LPC
> > > - default n
> > > + tristate "ChromeOS Embedded Controller (LPC)"
> > > + depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > > help
> > > - If you say Y here, a variant LPC protocol for the Microchip EC
> > > - will be used. Note that this variant is not backward compatible
> > > - with non-Microchip ECs.
> > > + If you say Y here, you get support for talking to the ChromeOS EC
> > > + over an LPC bus, including the LPC Microchip EC (MEC) variant.
> > > + This uses a simple byte-level protocol with a checksum. This is
> > > + used for userspace access only. The kernel typically has its own
> > > + communication methods.
> > >
> > > - If you have a ChromeOS Embedded Controller Microchip EC variant
> > > - choose Y here.
> > > + To compile this driver as a module, choose M here: the
> > > + module will be called cros_ec_lpcs.
> > >
> > > config CROS_EC_PROTO
> > > bool
> > > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> > > index 1b2f1dcfcd5c..d6416411888f 100644
> > > --- a/drivers/platform/chrome/Makefile
> > > +++ b/drivers/platform/chrome/Makefile
> > > @@ -9,8 +9,7 @@ obj-$(CONFIG_CHROMEOS_TBMC) += chromeos_tbmc.o
> > > obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
> > > obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
> > > obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> > > -cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o
> > > -cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> > > +cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o cros_ec_lpc_mec.o
> > > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
> > > obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o
> > > obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> > > index c9c240fbe7c6..91cb4dd34764 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc.c
> > > +++ b/drivers/platform/chrome/cros_ec_lpc.c
> > > @@ -28,6 +28,22 @@
> > > #define DRV_NAME "cros_ec_lpcs"
> > > #define ACPI_DRV_NAME "GOOG0004"
> > >
> > > +/**
> > > + * struct lpc_ops - LPC driver methods
> > > + *
> > > + * @read: Read bytes from a given LPC-mapped address.
> > > + * @write: Write bytes to a given LPC-mapped address.
> > > + */
> > > +struct lpc_ops {
> > > + u8 (*read)(unsigned int offset, unsigned int length, u8 *dest);
> > > + u8 (*write)(unsigned int offset, unsigned int length, u8 *msg);
> > > +};
> > > +
> > > +static struct lpc_ops cros_ec_lpc_ops = {
> > > + .read = cros_ec_lpc_mec_read_bytes,
> > > + .write = cros_ec_lpc_mec_write_bytes,
> > > +};
> > > +
> >
> > While this is better than a global boolean, it's still not
> > per-device.
> >
> > I guess it's not an issue given you typically (always?)
> > have one cros-ec device per platform.
> >
> > However, I'm still wondering if it's not better to make it
> > per-device (as the bus is per-device?).
>
> Enric and I were discussing this. Up to this point, there has only been
> one EC device per platform, and I think this is a reasonable
> expectation to maintain. I'm adding Stefan Reinauer, the Chrome OS
> EC lead, for their thoughts. Stefan, we are discussing whether or not we
> need to support multiple communication protocols at the same time,
> for instance if a device had multiple ECs, each with a different protocol.
>
> If we really wanted to support multiple ECs, there would be some other
> work to do besides this one fix, since the memory addresses that
> we write to are hardcoded into the drivers. In order to support
> multiple devices,
> not only would we need to make the xfer algorithms per-device, but would
> also need to make the memory addresses per-device. I would love
> some feedback on this, but my initial thought would be to add a
> "void *xfer_protocol_data" field to struct cros_ec_device, alongside
> the two existing
> int (*cmd_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg);
> int (*pkt_xfer)(struct cros_ec_device *ec, struct cros_ec_command *msg);
> fields. Then, each different protocol (lpc, i2c, spi, rpmsg, ishtp;
> some of these
> are only in the Chromium tree as of now) would be able to use this
> field as needed,
> for example to store the I2C address or the is_MEC flag for each device.
>

I understand that the current implementation may be insufficient if
there is ever more than one EC in a given system. Maybe I am missing
something, but why even consider it right now, with no such system in
existence ? We would not even know if a more flexible implementation
actually works, since there would be no means to test it.

Thanks,
Guenter

> Thanks,
> Nick
>
> >
> > > /* True if ACPI device is present */
> > > static bool cros_ec_lpc_acpi_device_found;
> > >
> > > @@ -38,7 +54,7 @@ static int ec_response_timed_out(void)
> > >
> > > usleep_range(200, 300);
> > > do {
> > > - if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) &
> > > + if (!(cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data) &
> > > EC_LPC_STATUS_BUSY_MASK))
> > > return 0;
> > > usleep_range(100, 200);
> > > @@ -58,11 +74,11 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > > ret = cros_ec_prepare_tx(ec, msg);
> > >
> > > /* Write buffer */
> > > - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
> > > + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
> > >
> > > /* Here we go */
> > > sum = EC_COMMAND_PROTOCOL_3;
> > > - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > > + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > >
> > > if (ec_response_timed_out()) {
> > > dev_warn(ec->dev, "EC responsed timed out\n");
> > > @@ -71,15 +87,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > > }
> > >
> > > /* Check result */
> > > - msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > + msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > ret = cros_ec_check_result(ec, msg);
> > > if (ret)
> > > goto done;
> > >
> > > /* Read back response */
> > > dout = (u8 *)&response;
> > > - sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
> > > - dout);
> > > + sum = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
> > > + dout);
> > >
> > > msg->result = response.result;
> > >
> > > @@ -92,9 +108,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
> > > }
> > >
> > > /* Read response and process checksum */
> > > - sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET +
> > > - sizeof(response), response.data_len,
> > > - msg->data);
> > > + sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET +
> > > + sizeof(response), response.data_len,
> > > + msg->data);
> > >
> > > if (sum) {
> > > dev_err(ec->dev,
> > > @@ -134,17 +150,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > > sum = msg->command + args.flags + args.command_version + args.data_size;
> > >
> > > /* Copy data and update checksum */
> > > - sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
> > > - msg->data);
> > > + sum += cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
> > > + msg->data);
> > >
> > > /* Finalize checksum and write args */
> > > args.checksum = sum;
> > > - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > - (u8 *)&args);
> > > + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > + (u8 *)&args);
> > >
> > > /* Here we go */
> > > sum = msg->command;
> > > - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > > + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
> > >
> > > if (ec_response_timed_out()) {
> > > dev_warn(ec->dev, "EC responsed timed out\n");
> > > @@ -153,14 +169,13 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > > }
> > >
> > > /* Check result */
> > > - msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > + msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
> > > ret = cros_ec_check_result(ec, msg);
> > > if (ret)
> > > goto done;
> > >
> > > /* Read back args */
> > > - cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
> > > - (u8 *)&args);
> > > + cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args);
> > >
> > > if (args.data_size > msg->insize) {
> > > dev_err(ec->dev,
> > > @@ -174,8 +189,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
> > > sum = msg->command + args.flags + args.command_version + args.data_size;
> > >
> > > /* Read response and update checksum */
> > > - sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size,
> > > - msg->data);
> > > + sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size,
> > > + msg->data);
> > >
> > > /* Verify checksum */
> > > if (args.checksum != sum) {
> > > @@ -205,13 +220,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
> > >
> > > /* fixed length */
> > > if (bytes) {
> > > - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
> > > + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
> > > return bytes;
> > > }
> > >
> > > /* string */
> > > for (; i < EC_MEMMAP_SIZE; i++, s++) {
> > > - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s);
> > > + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s);
> > > cnt++;
> > > if (!*s)
> > > break;
> > > @@ -248,10 +263,23 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
> > > return -EBUSY;
> > > }
> > >
> > > - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
> > > + /*
> > > + * Read the mapped ID twice, the first one is assuming the
> > > + * EC is a Microchip Embedded Controller (MEC) variant, if the
> > > + * protocol fails, fallback to the non MEC variant and try to
> > > + * read again the ID.
> > > + */
> > > + cros_ec_lpc_mec_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
> > > if (buf[0] != 'E' || buf[1] != 'C') {
> > > - dev_err(dev, "EC ID not detected\n");
> > > - return -ENODEV;
> > > + cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2,
> > > + buf);
> > > + if (buf[0] != 'E' || buf[1] != 'C') {
> > > + dev_err(dev, "EC ID not detected\n");
> > > + return -ENODEV;
> > > + }
> > > + /* Re-assign read/write operations for the non MEC variant */
> > > + cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes;
> > > + cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes;
> > > }
> > >
> > > if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > index 0f5cd0ac8b49..389d3329616f 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> > > @@ -9,7 +9,7 @@
> > >
> > > #include "cros_ec_lpc_mec.h"
> > >
> > > -static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > +u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > {
> > > int i;
> > > int sum = 0;
> > > @@ -23,7 +23,7 @@ static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > return sum;
> > > }
> > >
> > > -static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > +u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > {
> > > int i;
> > > int sum = 0;
> > > @@ -37,9 +37,8 @@ static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > return sum;
> > > }
> > >
> > > -#ifdef CONFIG_CROS_EC_LPC_MEC
> > > -
> > > -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > +u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
> > > + u8 *dest)
> > > {
> > > int in_range = cros_ec_lpc_mec_in_range(offset, length);
> > >
> > > @@ -50,10 +49,12 @@ u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > cros_ec_lpc_io_bytes_mec(MEC_IO_READ,
> > > offset - EC_HOST_CMD_REGION0,
> > > length, dest) :
> > > - lpc_read_bytes(offset, length, dest);
> > > + cros_ec_lpc_read_bytes(offset, length, dest);
> > > +
> > > }
> > >
> > > -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > +u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
> > > + u8 *msg)
> > > {
> > > int in_range = cros_ec_lpc_mec_in_range(offset, length);
> > >
> > > @@ -64,7 +65,7 @@ u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE,
> > > offset - EC_HOST_CMD_REGION0,
> > > length, msg) :
> > > - lpc_write_bytes(offset, length, msg);
> > > + cros_ec_lpc_write_bytes(offset, length, msg);
> > > }
> > >
> > > void cros_ec_lpc_reg_init(void)
> > > @@ -77,25 +78,3 @@ void cros_ec_lpc_reg_destroy(void)
> > > {
> > > cros_ec_lpc_mec_destroy();
> > > }
> > > -
> > > -#else /* CONFIG_CROS_EC_LPC_MEC */
> > > -
> > > -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
> > > -{
> > > - return lpc_read_bytes(offset, length, dest);
> > > -}
> > > -
> > > -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
> > > -{
> > > - return lpc_write_bytes(offset, length, msg);
> > > -}
> > > -
> > > -void cros_ec_lpc_reg_init(void)
> > > -{
> > > -}
> > > -
> > > -void cros_ec_lpc_reg_destroy(void)
> > > -{
> > > -}
> > > -
> > > -#endif /* CONFIG_CROS_EC_LPC_MEC */
> > > diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.h b/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > index 416fd2572182..e8d53fb8a2bc 100644
> > > --- a/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > +++ b/drivers/platform/chrome/cros_ec_lpc_reg.h
> > > @@ -28,6 +28,32 @@ u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest);
> > > */
> > > u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg);
> > >
> > > +/**
> > > + * cros_ec_lpc_mec_read_bytes() - Read bytes from a given LPC-mapped address.
> > > + * @offset: Base read address
> > > + * @length: Number of bytes to read
> > > + * @dest: Destination buffer
> > > + *
> > > + * This function is for the MEC (Microchip Embedded Controller) variant.
> > > + *
> > > + * Return: 8-bit checksum of all bytes read.
> > > + */
> > > +u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
> > > + u8 *dest);
> > > +
> > > +/**
> > > + * cros_ec_lpc_mec_write_bytes - Write bytes to a given LPC-mapped address.
> > > + * @offset: Base write address
> > > + * @length: Number of bytes to write
> > > + * @msg: Write data buffer
> > > + *
> > > + * This function is for the MEC (Microchip Embedded Controller) variant.
> > > + *
> > > + * Return: 8-bit checksum of all bytes written.
> > > + */
> > > +u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
> > > + u8 *msg);
> > > +
> > > /**
> > > * cros_ec_lpc_reg_init
> > > *
> > > diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig
> > > index fd29cbfd3d5d..c63ff2508409 100644
> > > --- a/drivers/platform/chrome/wilco_ec/Kconfig
> > > +++ b/drivers/platform/chrome/wilco_ec/Kconfig
> > > @@ -1,7 +1,7 @@
> > > # SPDX-License-Identifier: GPL-2.0-only
> > > config WILCO_EC
> > > tristate "ChromeOS Wilco Embedded Controller"
> > > - depends on ACPI && X86 && CROS_EC_LPC && CROS_EC_LPC_MEC
> > > + depends on ACPI && X86 && CROS_EC_LPC
> > > help
> > > If you say Y here, you get support for talking to the ChromeOS
> > > Wilco EC over an eSPI bus. This uses a simple byte-level protocol
> > > --
> > > 2.20.1
> > >
> > >
> >
> >