[PATCH v7 13/27] x86/mm: Modify ptep_set_wrprotect and pmdp_set_wrprotect for _PAGE_DIRTY_SW

From: Yu-cheng Yu
Date: Thu Jun 06 2019 - 16:20:49 EST


When Shadow Stack is enabled, the [R/O + PAGE_DIRTY_HW] setting is
reserved only for the Shadow Stack. Non-Shadow Stack R/O PTEs use
[R/O + PAGE_DIRTY_SW].

When a PTE goes from [R/W + PAGE_DIRTY_HW] to [R/O + PAGE_DIRTY_SW],
it could become a transient Shadow Stack PTE in two cases.

The first case is that some processors can start a write but end up
seeing a read-only PTE by the time they get to the Dirty bit,
creating a transient Shadow Stack PTE. However, this will not occur
on processors supporting Shadow Stack therefore we don't need a TLB
flush here.

The second case is that when the software, without atomic, tests &
replaces PAGE_DIRTY_HW with PAGE_DIRTY_SW, a transient Shadow Stack
PTE can exist. This is prevented with cmpxchg.

Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided
many insights to the issue. Jann Horn provided the cmpxchg solution.

Signed-off-by: Yu-cheng Yu <yu-cheng.yu@xxxxxxxxx>
---
arch/x86/include/asm/pgtable.h | 58 ++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 0a3ce0a94d73..2dd079080be2 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -1222,7 +1222,36 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
static inline void ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
+#ifdef CONFIG_X86_INTEL_SHADOW_STACK_USER
+ pte_t new_pte, pte = READ_ONCE(*ptep);
+
+ /*
+ * Some processors can start a write, but end up
+ * seeing a read-only PTE by the time they get
+ * to the Dirty bit. In this case, they will
+ * set the Dirty bit, leaving a read-only, Dirty
+ * PTE which looks like a Shadow Stack PTE.
+ *
+ * However, this behavior has been improved and
+ * will not occur on processors supporting
+ * Shadow Stacks. Without this guarantee, a
+ * transition to a non-present PTE and flush the
+ * TLB would be needed.
+ *
+ * When changing a writable PTE to read-only and
+ * if the PTE has _PAGE_DIRTY_HW set, we move
+ * that bit to _PAGE_DIRTY_SW so that the PTE is
+ * not a valid Shadow Stack PTE.
+ */
+ do {
+ new_pte = pte_wrprotect(pte);
+ new_pte.pte |= (new_pte.pte & _PAGE_DIRTY_HW) >>
+ _PAGE_BIT_DIRTY_HW << _PAGE_BIT_DIRTY_SW;
+ new_pte.pte &= ~_PAGE_DIRTY_HW;
+ } while (!try_cmpxchg(ptep, &pte, new_pte));
+#else
clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
+#endif
}

#define flush_tlb_fix_spurious_fault(vma, address) do { } while (0)
@@ -1285,7 +1314,36 @@ static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
static inline void pmdp_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pmd_t *pmdp)
{
+#ifdef CONFIG_X86_INTEL_SHADOW_STACK_USER
+ pmd_t new_pmd, pmd = READ_ONCE(*pmdp);
+
+ /*
+ * Some processors can start a write, but end up
+ * seeing a read-only PMD by the time they get
+ * to the Dirty bit. In this case, they will
+ * set the Dirty bit, leaving a read-only, Dirty
+ * PMD which looks like a Shadow Stack PMD.
+ *
+ * However, this behavior has been improved and
+ * will not occur on processors supporting
+ * Shadow Stacks. Without this guarantee, a
+ * transition to a non-present PMD and flush the
+ * TLB would be needed.
+ *
+ * When changing a writable PMD to read-only and
+ * if the PMD has _PAGE_DIRTY_HW set, we move
+ * that bit to _PAGE_DIRTY_SW so that the PMD is
+ * not a valid Shadow Stack PMD.
+ */
+ do {
+ new_pmd = pmd_wrprotect(pmd);
+ new_pmd.pmd |= (new_pmd.pmd & _PAGE_DIRTY_HW) >>
+ _PAGE_BIT_DIRTY_HW << _PAGE_BIT_DIRTY_SW;
+ new_pmd.pmd &= ~_PAGE_DIRTY_HW;
+ } while (!try_cmpxchg(pmdp, &pmd, new_pmd));
+#else
clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp);
+#endif
}

#define pud_write pud_write
--
2.17.1