Re: [v3 PATCH] RISC-V: Add a PE/COFF compliant Image header.

From: Mark Rutland
Date: Wed Jun 05 2019 - 12:31:00 EST


On Thu, May 23, 2019 at 11:35:16AM -0700, Atish Patra wrote:
> Currently, last stage boot loaders such as U-Boot can accept only
> uImage which is an unnecessary additional step in automating boot flows.
>
> Add a PE/COFF compliant image header that boot loaders can parse and
> directly load kernel flat Image. The existing booting methods will continue
> to work as it is.
>
> Another goal of this header is to support EFI stub for RISC-V in future.
> EFI specification needs PE/COFF image header in the beginning of the kernel
> image in order to load it as an EFI application. In order to support
> EFI stub, code0 should be replaced with "MZ" magic string and res5(at
> offset 0x3c) should point to the rest of the PE/COFF header (which will
> be added during EFI support).
>
> This patch is based on ARM64 boot image header and provides an opprtunity
> to combine both ARM64 & RISC-V image headers.
>
> Tested on both QEMU and HiFive Unleashed using OpenSBI + U-Boot + Linux.
>
> Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
>
> ---
> I have not sent out corresponding U-Boot patch as all the changes are
> compatible with current u-boot support. Once, the kernel header format
> is agreed upon, I will update the U-Boot patch.
>
> Changes from v2->v3
> 1. Modified reserved fields to define a header version.
> 2. Added header documentation.
>
> Changes from v1-v2:
> 1. Added additional reserved elements to make it fully PE compatible.
> ---
> Documentation/riscv/boot-image-header.txt | 50 ++++++++++++++++++
> arch/riscv/include/asm/image.h | 64 +++++++++++++++++++++++
> arch/riscv/kernel/head.S | 32 ++++++++++++
> 3 files changed, 146 insertions(+)
> create mode 100644 Documentation/riscv/boot-image-header.txt
> create mode 100644 arch/riscv/include/asm/image.h
>
> diff --git a/Documentation/riscv/boot-image-header.txt b/Documentation/riscv/boot-image-header.txt
> new file mode 100644
> index 000000000000..68abc2353cec
> --- /dev/null
> +++ b/Documentation/riscv/boot-image-header.txt
> @@ -0,0 +1,50 @@
> + Boot image header in RISC-V Linux
> + =============================================
> +
> +Author: Atish Patra <atish.patra@xxxxxxx>
> +Date : 20 May 2019
> +
> +This document only describes the boot image header details for RISC-V Linux.
> +The complete booting guide will be available at Documentation/riscv/booting.txt.
> +
> +The following 64-byte header is present in decompressed Linux kernel image.
> +
> + u32 code0; /* Executable code */
> + u32 code1; /* Executable code */
> + u64 text_offset; /* Image load offset, little endian */
> + u64 image_size; /* Effective Image size, little endian */
> + u64 flags; /* kernel flags, little endian */
> + u32 version; /* Version of this header */
> + u32 res1 = 0; /* Reserved */
> + u64 res2 = 0; /* Reserved */
> + u64 magic = 0x5643534952; /* Magic number, little endian, "RISCV" */
> + u32 res3; /* Reserved for additional RISC-V specific header */
> + u32 res4; /* Reserved for PE COFF offset */
> +
> +This header format is compliant with PE/COFF header and largely inspired from
> +ARM64 header. Thus, both ARM64 & RISC-V header can be combined into one common
> +header in future.
> +
> +Notes:
> +- This header can also be reused to support EFI stub for RISC-V in future. EFI
> + specification needs PE/COFF image header in the beginning of the kernel image
> + in order to load it as an EFI application. In order to support EFI stub,
> + code0 should be replaced with "MZ" magic string and res5(at offset 0x3c) should
> + point to the rest of the PE/COFF header.
> +
> +- version field indicate header version number.
> + Bits 0:15 - Minor version
> + Bits 16:31 - Major version
> +
> + This preserves compatibility across newer and older version of the header.
> + The current version is defined as 0.1.
> +
> +- res3 is reserved for offset to any other additional fields. This makes the
> + header extendible in future. One example would be to accommodate ISA
> + extension for RISC-V in future. For current version, it is set to be zero.
> +
> +- In current header, the flag field has only one field.
> + Bit 0: Kernel endianness. 1 if BE, 0 if LE.
> +
> +- Image size is mandatory for boot loader to load kernel image. Booting will
> + fail otherwise.
> diff --git a/arch/riscv/include/asm/image.h b/arch/riscv/include/asm/image.h
> new file mode 100644
> index 000000000000..61c9f20d2f19
> --- /dev/null
> +++ b/arch/riscv/include/asm/image.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __ASM_IMAGE_H
> +#define __ASM_IMAGE_H
> +
> +#define RISCV_IMAGE_MAGIC "RISCV"
> +
> +
> +#define RISCV_IMAGE_FLAG_BE_SHIFT 0
> +#define RISCV_IMAGE_FLAG_BE_MASK 0x1
> +
> +#define RISCV_IMAGE_FLAG_LE 0
> +#define RISCV_IMAGE_FLAG_BE 1
> +
> +
> +#ifdef CONFIG_CPU_BIG_ENDIAN
> +#define __HEAD_FLAG_BE RISCV_IMAGE_FLAG_BE
> +#else
> +#define __HEAD_FLAG_BE RISCV_IMAGE_FLAG_LE
> +#endif
> +
> +#define __HEAD_FLAG(field) (__HEAD_FLAG_##field << \
> + RISCV_IMAGE_FLAG_##field##_SHIFT)
> +
> +#define __HEAD_FLAGS (__HEAD_FLAG(BE))

If you have a CONFIG_CPU_BIG_ENDIAN kernel, this will not be
little-endian, nor will other fields in your header (e.g. the image
size), so I would recommend dropping this for now.

To manage that for the image_size field you'll probably need to play the
same linker trick games we play on arm64.

It's probably worth having:

#ifdef CONFIG_CPU_BIG_ENDIAN
#error conversion of header fields to LE not yet implemented
#endif

... to catch that later.

Thanks,
Mark,