Re: [PATCH 2/3] mmc: core: API for temporarily disabling auto-retuning due to errors

From: Adrian Hunter
Date: Tue May 28 2019 - 06:08:35 EST


On 26/05/19 9:42 PM, Arend Van Spriel wrote:
> On 5/18/2019 12:54 AM, Douglas Anderson wrote:
>> Normally when the MMC core sees an "-EILSEQ" error returned by a host
>> controller then it will trigger a retuning of the card. This is
>> generally a good idea.
>
> Probably a question for Adrian, but how is this retuning scheduled. I recall
> seeing something in mmc_request_done. How about deferring the retuning upon
> a release host or is that too sdio specific.

Below is what I have been carrying the last 4 years. But according to Douglas'
patch, the release would need to be further down. See 2nd diff below.
Would that work?


diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 3f67fbbe0d75..7a81a503541b 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -16,6 +16,7 @@
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>

+#include "host.h"
#include "sdio_ops.h"
#include "core.h"
#include "card.h"
@@ -738,3 +739,15 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
return 0;
}
EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+ mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+void sdio_retune_release(struct sdio_func *func)
+{
+ mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 22b73da42822..c915c39d519f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -679,6 +679,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
brcmf_dbg(TRACE, "Enter: on=%d\n", on);

wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+
+ /* Cannot re-tune if device is asleep */
+ if (on)
+ sdio_retune_hold_now(bus->sdiodev->func1);
+
/* 1st KSO write goes to AOS wake up core if device is asleep */
brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);

@@ -691,6 +696,7 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
return err;

if (on) {
+ sdio_retune_release(bus->sdiodev->func1);
/* device WAKEUP through KSO:
* write bit 0 & read back until
* both bits 0 (kso bit) & 1 (dev on status) are set
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 5685805533b5..85c24b0694d7 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -171,4 +171,7 @@ extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);

+extern void sdio_retune_hold_now(struct sdio_func *func);
+extern void sdio_retune_release(struct sdio_func *func);
+
#endif /* LINUX_MMC_SDIO_FUNC_H */





diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 3f67fbbe0d75..7a81a503541b 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -16,6 +16,7 @@
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>

+#include "host.h"
#include "sdio_ops.h"
#include "core.h"
#include "card.h"
@@ -738,3 +739,15 @@ int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
return 0;
}
EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);
+
+void sdio_retune_hold_now(struct sdio_func *func)
+{
+ mmc_retune_hold_now(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_hold_now);
+
+void sdio_retune_release(struct sdio_func *func)
+{
+ mmc_retune_release(func->card->host);
+}
+EXPORT_SYMBOL_GPL(sdio_retune_release);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 22b73da42822..50c153932683 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -679,6 +679,11 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
brcmf_dbg(TRACE, "Enter: on=%d\n", on);

wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
+
+ /* Cannot re-tune if device is asleep */
+ if (on)
+ sdio_retune_hold_now(bus->sdiodev->func1);
+
/* 1st KSO write goes to AOS wake up core if device is asleep */
brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err);

@@ -731,6 +736,9 @@ brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)

} while (try_cnt++ < MAX_KSO_ATTEMPTS);

+ if (on)
+ sdio_retune_release(bus->sdiodev->func1);
+
if (try_cnt > 2)
brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,
rd_val, err);
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 5685805533b5..85c24b0694d7 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -171,4 +171,7 @@ extern void sdio_f0_writeb(struct sdio_func *func, unsigned char b,
extern mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func);
extern int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags);

+extern void sdio_retune_hold_now(struct sdio_func *func);
+extern void sdio_retune_release(struct sdio_func *func);
+
#endif /* LINUX_MMC_SDIO_FUNC_H */