Re: [PATCH v3] arm64: dts: qcom: qcs404: Add PCIe related nodes

[Vinod Koul]

On 01-05-19, 17:24, Bjorn Andersson wrote:
> The QCS404 has a PCIe2 PHY and a Qualcomm PCIe controller, add these to
> the platform dtsi and enable them for the EVB with the perst gpio
> and analog supplies defined.
> 
> Reviewed-by: Niklas Cassel <niklas.cassel@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> The patch depends on the acceptance of:
> https://lore.kernel.org/lkml/20190502002138.10646-1-bjorn.andersson@xxxxxxxxxx/
> https://lore.kernel.org/lkml/20190502001406.10431-2-bjorn.andersson@xxxxxxxxxx/
> https://lore.kernel.org/lkml/20190502001955.10575-3-bjorn.andersson@xxxxxxxxxx/
> 
> Changes since v2:
> - None
> 
>  arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 25 +++++++++
>  arch/arm64/boot/dts/qcom/qcs404.dtsi     | 67 ++++++++++++++++++++++++

I would have preferred the evb changes to follow the node addition but
that is matter of preference :)

>  2 files changed, 92 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> index 2c3127167e3c..988d21ca0df1 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> @@ -68,6 +68,22 @@
>  	};
>  };
>  
> +&pcie {
> +	status = "ok";
> +
> +	perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&perst_state>;
> +};
> +
> +&pcie_phy {
> +	status = "ok";
> +
> +	vdda-vp-supply = <&vreg_l3_1p05>;
> +	vdda-vph-supply = <&vreg_l5_1p8>;
> +};
> +
>  &remoteproc_adsp {
>  	status = "ok";
>  };
> @@ -184,6 +200,15 @@
>  };
>  
>  &tlmm {
> +	perst_state: perst {
> +		pins = "gpio43";
> +		function = "gpio";
> +
> +		drive-strength = <2>;
> +		bias-disable;
> +		output-low;
> +	};
> +
>  	sdc1_on: sdc1-on {
>  		clk {
>  			pins = "sdc1_clk";
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index ffedf9640af7..f41feab8996c 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -4,6 +4,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,gcc-qcs404.h>
>  #include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -383,6 +384,7 @@
>  			compatible = "qcom,gcc-qcs404";
>  			reg = <0x01800000 0x80000>;
>  			#clock-cells = <1>;
> +			#reset-cells = <1>;

But this one doesn't belong here..

Rest lgtm.

-- 
~Vinod