[PATCH 2/5] dt-bindings: perf: stm32: ddrperfm support

From: Gerald BAEZA
Date: Mon Apr 29 2019 - 06:04:05 EST


The DDRPERFM is the DDR Performance Monitor embedded in STM32MP1 SOC.

This documentation indicates how to enable stm32-ddr-pmu driver on
DDRPERFM peripheral, via the device tree.

Signed-off-by: Gerald Baeza <gerald.baeza@xxxxxx>
---
.../devicetree/bindings/perf/stm32-ddr-pmu.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt

diff --git a/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
new file mode 100644
index 0000000..dabc4c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/stm32-ddr-pmu.txt
@@ -0,0 +1,18 @@
+* STM32 DDR Performance Monitor (DDRPERFM)
+
+Required properties:
+- compatible: must be "st,stm32-ddr-pmu".
+- reg: physical address and length of the registers set.
+- clocks: list of phandles and specifiers to all input clocks listed in
+ clock-names property.
+- clock-names: "bus" corresponds to the DDRPERFM bus clock and "ddr" to
+ the DDR frequency.
+
+Example:
+ ddrperfm: perf@5a007000 {
+ compatible = "st,stm32-ddr-pmu";
+ reg = <0x5a007000 0x400>;
+ clocks = <&rcc DDRPERFM>, <&rcc PLL2_R>;
+ clock-names = "bus", "ddr";
+ };
+
--
2.7.4