Re: [PATCH v4] media: docs-rst: Document m2m stateless video decoder interface

From: Paul Kocialkowski
Date: Fri Apr 26 2019 - 12:28:19 EST


Hi,

Le vendredi 26 avril 2019 Ã 16:18 +0200, Hans Verkuil a Ãcrit :
> On 4/16/19 9:22 AM, Alexandre Courbot wrote:
>
> <snip>
>
> > Thanks for this great discussion. Let me try to summarize the status
> > of this thread + the IRC discussion and add my own thoughts:
> >
> > Proper support for multiple decoding units (e.g. H.264 slices) per
> > frame should not be an afterthought ; compliance to encoded formats
> > depend on it, and the benefit of lower latency is a significant
> > consideration for vendors.
> >
> > m2m, which we use for all stateless codecs, has a strong assumption
> > that one OUTPUT buffer consumed results in one CAPTURE buffer being
> > produced. This assumption can however be overruled: at least the venus
> > driver does it to implement the stateful specification.
> >
> > So we need a way to specify frame boundaries when submitting encoded
> > content to the driver. One request should contain a single OUTPUT
> > buffer, containing a single decoding unit, but we need a way to
> > specify whether the driver should directly produce a CAPTURE buffer
> > from this request, or keep using the same CAPTURE buffer with
> > subsequent requests.
> >
> > I can think of 2 ways this can be expressed:
> > 1) We keep the current m2m behavior as the default (a CAPTURE buffer
> > is produced), and add a flag to ask the driver to change that behavior
> > and hold on the CAPTURE buffer and reuse it with the next request(s) ;
> > 2) We specify that no CAPTURE buffer is produced by default, unless a
> > flag asking so is specified.
> >
> > The flag could be specified in one of two ways:
> > a) As a new v4l2_buffer.flag for the OUTPUT buffer ;
> > b) As a dedicated control, either format-specific or more common to all codecs.
> >
> > I tend to favor 2) and b) for this, for the reason that with H.264 at
> > least, user-space does not know whether a slice is the last slice of a
> > frame until it starts parsing the next one, and we don't know when we
> > will receive it. If we use a control to ask that a CAPTURE buffer be
> > produced, we can always submit another request with only that control
> > set once it is clear that the frame is complete (and not delay
> > decoding meanwhile). In practice I am not that familiar with
> > latency-sensitive streaming ; maybe a smart streamer would just append
> > an AUD NAL unit at the end of every frame and we can thus submit the
> > flag it with the last slice without further delay?
> >
> > An extra constraint to enforce would be that each decoding unit
> > belonging to the same frame must be submitted with the same timestamp,
> > otherwise the request submission would fail. We really need a
> > framework to enforce all this at a higher level than individual
> > drivers, once we reach an agreement I will start working on this.
> >
> > Formats that do not support multiple decoding units per frame would
> > reject any request that does not carry the end-of-frame information.
> >
> > Anything missing / any further comment?
> >
>
> After reading through this thread and a further irc discussion I now
> understand the problem. I think there are several ways this can be
> solved, but I think this is the easiest:
>
> Introduce a new V4L2_BUF_FLAG_HOLD_CAPTURE_BUFFER flag.
>
> If set in the OUTPUT buffer, then don't mark the CAPTURE buffer as
> done after processing the OUTPUT buffer.
>
> If an OUTPUT buffer was queued with a different timestamp than was
> used for the currently held CAPTURE buffer, then mark that CAPTURE
> buffer as done before starting processing this OUTPUT buffer.
>
> In other words, for slicing you can just always set this flag and
> group the slices by the OUTPUT timestamp. If you know that you
> reached the last slice of a frame, then you can optionally clear the
> flag to ensure the CAPTURE buffer is marked done without having to wait
> for the first slice of the next frame to arrive.
>
> Potential disadvantage of this approach is that this relies on the
> OUTPUT timestamp to be the same for all slices of the same frame.
>
> Which sounds reasonable to me.
>
> In addition add a V4L2_BUF_CAP_SUPPORTS_HOLD_CAPTURE_BUFFER
> capability to signal support for this flag.
>
> I think this can be fairly easily implemented in v4l2-mem2mem.c.
>
> In addition, this approach is not specific to codecs, it can be
> used elsewhere as well (composing multiple output buffers into one
> capture buffer is one use-case that comes to mind).
>
> Comments? Other ideas?

One remark I have: this implies that the order in which requests are
decoded will match the order in which they are submitted (in order to
be rely on the last slice being marked as such).

In the future, we might want to be ablle to add support for parallel
decoders that could handle multiple slices concurrently. I don't think
the M2M internal API is ready for that currently, but it could
certainly be extended to allow that eventually. In that case, we can't
rely on the order in which slices will complete their decoding and the
one slice that was marking the end of the frame may be decoded sooner
than other slices scheduled at the same time. In this case, we end up
having to wait for a new frame in order to mark the destination buffer
as done, which introduces a major latency issue for the frame.

So I think the problem we should be trying to resolve should be
formulated in terms of marking the end of a group of requests as done.

For that, my proposal is to solve the issue at the media API level, by
introducing an entity representing a group of requests that share the
same destination buffer. The idea would be that requests are added to
that entity when they are submitted, and a field in the submit ioctl
would indicate whether the request is the last one of the batch.

The destination buffer gets picked up when the first request is
processed and all subsequent requests grouped in the entity use the
same one. Then, we can have the media core ensure that all the requests
of that entity are completed and that the last element of the batch was
submitted before marking the destination buffer as done.

This presents a few advantages:
- Userspace has a straightforward interface to group the completion of
requests, which is independent from both our use case and v4l2;
- This mechanism can then be used in other situations where grouping
the completion of different requests is desirable: for instance, it
could be used to sync two source feeds that need to be displayed
synchronized;
- Userspace can poll on a single file descriptor representing the
entity, instead of having to do the book keeping of checking that each
request was completed before dealing with the decoded buffer.

What do you think?

Cheers,

Paul