[PATCH] regulator: mcp16502: Remove setup_regulators function

From: Axel Lin
Date: Wed Apr 10 2019 - 21:59:23 EST


It seems a little bit odd current code pass struct regulator_config rather
than a pointer to setup_regulators. The setup_regulators is so simple and
only has one caller, so remove it.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
drivers/regulator/mcp16502.c | 37 +++++++++++-------------------------
1 file changed, 11 insertions(+), 26 deletions(-)

diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 9292ab8736c7..e5a02711cb46 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -427,36 +427,15 @@ static const struct regmap_config mcp16502_regmap_config = {
.wr_table = &mcp16502_yes_reg_table,
};

-/*
- * set_up_regulators() - initialize all regulators
- */
-static int setup_regulators(struct mcp16502 *mcp, struct device *dev,
- struct regulator_config config)
-{
- struct regulator_dev *rdev;
- int i;
-
- for (i = 0; i < NUM_REGULATORS; i++) {
- rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
- if (IS_ERR(rdev)) {
- dev_err(dev,
- "failed to register %s regulator %ld\n",
- mcp16502_desc[i].name, PTR_ERR(rdev));
- return PTR_ERR(rdev);
- }
- }
-
- return 0;
-}
-
static int mcp16502_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct regulator_config config = { };
+ struct regulator_dev *rdev;
struct device *dev;
struct mcp16502 *mcp;
struct regmap *rmap;
- int ret = 0;
+ int i, ret;

dev = &client->dev;
config.dev = dev;
@@ -482,9 +461,15 @@ static int mcp16502_probe(struct i2c_client *client,
return PTR_ERR(mcp->lpm);
}

- ret = setup_regulators(mcp, dev, config);
- if (ret != 0)
- return ret;
+ for (i = 0; i < NUM_REGULATORS; i++) {
+ rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev,
+ "failed to register %s regulator %ld\n",
+ mcp16502_desc[i].name, PTR_ERR(rdev));
+ return PTR_ERR(rdev);
+ }
+ }

mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);

--
2.20.1