RE: [PATCH v3] RISC-V: Implement ASID allocator

From: Anup Patel
Date: Wed Apr 24 2019 - 23:49:48 EST




> -----Original Message-----
> From: Gary Guo <gary@xxxxxxxxxxx>
> Sent: Thursday, April 25, 2019 8:19 AM
> To: Anup Patel <anup@xxxxxxxxxxxxxx>; Palmer Dabbelt
> <palmer@xxxxxxxxxx>
> Cc: Anup Patel <Anup.Patel@xxxxxxx>; Albert Ou
> <aou@xxxxxxxxxxxxxxxxx>; Atish Patra <Atish.Patra@xxxxxxx>; Christoph
> Hellwig <hch@xxxxxxxxxxxxx>; Paul Walmsley <paul.walmsley@xxxxxxxxxx>;
> Mike Rapoport <rppt@xxxxxxxxxxxxx>; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx List <linux-kernel@xxxxxxxxxxxxxxx>
> Subject: RE: [PATCH v3] RISC-V: Implement ASID allocator
>
> This patch absolutely does not work with a hardware that implements ASID
> feature. Aside from many corner cases, it does not even boot on a hardware
> with ASID implemented. It only works because QEMU does not use ASID at
> all. I have already pointed out many issues multiple times in the thread but
> most of them are not addressed.

So help us fix this patch.

You have been making statement all along without any proper use-case
where it breaks.

Regards,
Anup

>
> > -----Original Message-----
> > From: Anup Patel <anup@xxxxxxxxxxxxxx>
> > Sent: Thursday, April 25, 2019 03:04
> > To: Palmer Dabbelt <palmer@xxxxxxxxxx>
> > Cc: Anup Patel <Anup.Patel@xxxxxxx>; Albert Ou
> > <aou@xxxxxxxxxxxxxxxxx>; Gary Guo <gary@xxxxxxxxxxx>; Atish Patra
> > <Atish.Patra@xxxxxxx>; Christoph Hellwig <hch@xxxxxxxxxxxxx>; Paul
> > Walmsley <paul.walmsley@xxxxxxxxxx>; Mike Rapoport
> > <rppt@xxxxxxxxxxxxx>; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx List <linux-kernel@xxxxxxxxxxxxxxx>
> > Subject: Re: [PATCH v3] RISC-V: Implement ASID allocator
> >
> > On Thu, Apr 25, 2019 at 5:06 AM Palmer Dabbelt <palmer@xxxxxxxxxx>
> wrote:
> > >
> > > On Thu, 28 Mar 2019 21:51:38 PDT (-0700), Anup.Patel@xxxxxxx wrote:
> > > > Currently, we do local TLB flush on every MM switch. This is very
> > > > harsh on performance because we are forcing page table walks after
> > > > every MM
> > switch.
> > > >
> > > > This patch implements ASID allocator for assigning an ASID to a MM
> context.
> > > > The number of ASIDs are limited in HW so we create a logical
> > > > entity named CONTEXTID for assigning to MM context. The lower bits
> > > > of CONTEXTID are
> > ASID
> > > > and upper bits are VERSION number. The number of usable ASID bits
> > supported
> > > > by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR.
> > > >
> > > > We allocate new CONTEXTID on first MM switch for a MM context
> > > > where
> > the
> > > > ASID is allocated from an ASID bitmap and VERSION is provide by an
> > > > atomic counter. At time of allocating new CONTEXTID, if we run out
> > > > of available ASIDs then:
> > > > 1. We flush the ASID bitmap
> > > > 2. Increment current VERSION atomic counter 3. Re-allocate ASID
> > > > from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID
> > > > re-assignment on all CPUs
> > > >
> > > > Please note that we don't use ASID #0 because it is used at
> > > > boot-time by all CPUs for initial MM context. Also, newly created
> > > > context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID
> > > > #0) which is an invalid context in our implementation.
> > > >
> > > > Using above approach, we have virtually infinite CONTEXTIDs
> > > > on-top-of limited number of HW ASIDs. This approach is inspired
> > > > from ASID allocator used for Linux ARM/ARM64 but we have adapted
> > > > it for RISC-V. Overall, this ASID allocator helps us reduce rate
> > > > of local TLB flushes on every CPU thereby increasing performance.
> > > >
> > > > This patch is tested on QEMU/virt machine and SiFive Unleashed
> > > > board. On QEMU/virt machine, we see 10% (approx) performance
> > > > improvement with
> > SW
> > > > emulated TLBs provided by QEMU. Unfortunately, ASID bits of SATP
> > > > CSR are not implemented on SiFive Unleashed board so we don't see
> > > > any change in performance.
> > >
> > > My worry here is the testing: I don't trust QEMU to be a good enough
> > > test of ASID handling to shake out the bugs in this sort of code --
> > > unless I'm missing something, we're currently ignoring ASIDs in QEMU
> > > entirely. As a result I'd consider this to be essentially
> > > untestable until someone comes up with an implementation that takes
> > > advantage of ASIDs. Given that bugs here would be super hard to
> > > find, I'd prefer to avoid merging this until we're sure it's solid.
> >
> > This patch is tested on both QEMU and SiFive Unleashed board so it
> > works perfectly fine on existing HW out there at this moment.
> >
> > For future HW having ASID bits, it will certainly save development
> > efforts for the RISC-V HW vendors if we merge it now.
> >
> > Irrespective to whether we merge this patch now or not, the debugging
> > and development complexity of ASID allocator will not change for whoever
> does it.
> >
> > Not merging it now is a bigger problem because RISC-V HW vendor not
> > following RISC-V LKML might re-implement it from scratch without
> > realizing that there is already an implementation sitting on RISC-V
> > LKML.
> >
> > In ARM world, any new ARM feature is first implemented and merged in
> > Linux kernel by ARM Ltd folks (tested on their ARM fast models). Later
> > some ARM SOC vendor, sends patch fixes (if required) after trying out
> > latest Linux on their HW having this new ARM feature.
> >
> > IMHO, we should merge this patch for Linux-5.2 so that RISC-V SOC
> > vendors can try it on their HW without re-implementing it from
> > scratch. The "debugging complexity" is integral part of kernel
> > development and this should not be a reason to defer critical changes as
> long as changes are tested on existing HW.
> >
> > Linux kernel is all about "organic development". We start with a
> > reasonable implementation of any thing and perfect it incrementally
> > over time. That's how we get a solid implementation.
> >
> > Regards,
> > Anup
> >
> > >
> > > > Co-developed-by:: Gary Guo <gary@xxxxxxxxxxx>
> > > > Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
> > > > ---
> > > > Changes since v2:
> > > > - Move to lazy TLB flushing because we get slow path warnings if we
> > > > use flush_tlb_all()
> > > > - Don't set ASID bits to all 1s in head.s. Instead just do it on
> > > > boot CPU calling asids_init() for determining number of HW ASID
> > > > bits
> > > > - Make CONTEXT version comparison more readable in set_mm_asid()
> > > > - Fix typo in __flush_context()
> > > >
> > > > Changes since v1:
> > > > - We adapt good aspects from Gary Guo's ASID allocator
> implementation
> > > > and provide due credit to him by adding his SoB.
> > > > - Track ASIDs active during context flush and mark them as
> > > > reserved
> > > > - Set ASID bits to all 1s to simplify number of ASID bit detection
> > > > - Use atomic_long_t instead of atomic64_t for being 32bit friendly
> > > > - Use unsigned long instead of u64 for being 32bit friendly
> > > > - Use flush_tlb_all() instead of lazy local_tlb_flush_all() at time
> > > > of context flush
> > > >
> > > > This patch is based on Linux-5.1-rc2 and TLB flush cleanup patches
> > > > v4 from Gary Guo. It can be also found in riscv_asid_allocator_v3
> > > > branch of https://github.com/avpatel/linux.git
> > > > ---
> > > > arch/riscv/include/asm/csr.h | 6 +
> > > > arch/riscv/include/asm/mmu.h | 1 +
> > > > arch/riscv/include/asm/mmu_context.h | 1 +
> > > > arch/riscv/mm/context.c | 261
> ++++++++++++++++++++++++++-
> > > > 4 files changed, 259 insertions(+), 10 deletions(-)
> > > >
> > > > diff --git a/arch/riscv/include/asm/csr.h
> > > > b/arch/riscv/include/asm/csr.h index 28a0d1cb374c..ce18ab8f53ed
> > > > 100644
> > > > --- a/arch/riscv/include/asm/csr.h
> > > > +++ b/arch/riscv/include/asm/csr.h
> > > > @@ -45,10 +45,16 @@
> > > > #define SATP_PPN _AC(0x003FFFFF, UL)
> > > > #define SATP_MODE_32 _AC(0x80000000, UL)
> > > > #define SATP_MODE SATP_MODE_32
> > > > +#define SATP_ASID_BITS 9
> > > > +#define SATP_ASID_SHIFT 22
> > > > +#define SATP_ASID_MASK _AC(0x1FF, UL)
> > > > #else
> > > > #define SATP_PPN _AC(0x00000FFFFFFFFFFF, UL)
> > > > #define SATP_MODE_39 _AC(0x8000000000000000, UL)
> > > > #define SATP_MODE SATP_MODE_39
> > > > +#define SATP_ASID_BITS 16
> > > > +#define SATP_ASID_SHIFT 44
> > > > +#define SATP_ASID_MASK _AC(0xFFFF, UL)
> > > > #endif
> > > >
> > > > /* Interrupt Enable and Interrupt Pending flags */ diff --git
> > > > a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
> > > > index 5df2dccdba12..42a9ca0fe1fb 100644
> > > > --- a/arch/riscv/include/asm/mmu.h
> > > > +++ b/arch/riscv/include/asm/mmu.h
> > > > @@ -18,6 +18,7 @@
> > > > #ifndef __ASSEMBLY__
> > > >
> > > > typedef struct {
> > > > + atomic_long_t id;
> > > > void *vdso;
> > > > #ifdef CONFIG_SMP
> > > > /* A local icache flush is needed before user execution can
> > > > resume. */ diff --git a/arch/riscv/include/asm/mmu_context.h
> > b/arch/riscv/include/asm/mmu_context.h
> > > > index bf4f097a9051..bd271c6b0e5e 100644
> > > > --- a/arch/riscv/include/asm/mmu_context.h
> > > > +++ b/arch/riscv/include/asm/mmu_context.h
> > > > @@ -30,6 +30,7 @@ static inline void enter_lazy_tlb(struct
> > > > mm_struct *mm, static inline int init_new_context(struct task_struct
> *task,
> > > > struct mm_struct *mm)
> > > > {
> > > > + atomic_long_set(&mm->context.id, 0);
> > > > return 0;
> > > > }
> > > >
> > > > diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
> > > > index 0f787bcd3a7a..863b6926d6d9 100644
> > > > --- a/arch/riscv/mm/context.c
> > > > +++ b/arch/riscv/mm/context.c
> > > > @@ -2,13 +2,213 @@
> > > > /*
> > > > * Copyright (C) 2012 Regents of the University of California
> > > > * Copyright (C) 2017 SiFive
> > > > + * Copyright (C) 2019 Western Digital Corporation or its affiliates.
> > > > */
> > > >
> > > > +#include <linux/bitops.h>
> > > > #include <linux/mm.h>
> > > > +#include <linux/slab.h>
> > > >
> > > > #include <asm/tlbflush.h>
> > > > #include <asm/cacheflush.h>
> > > >
> > > > +static bool use_asid_allocator;
> > > > +static unsigned long asid_bits;
> > > > +static unsigned long num_asids;
> > > > +static unsigned long asid_mask;
> > > > +
> > > > +static atomic_long_t current_version;
> > > > +
> > > > +static DEFINE_RAW_SPINLOCK(context_lock);
> > > > +static cpumask_t context_tlb_flush_pending; static unsigned long
> > > > +*context_asid_map;
> > > > +
> > > > +static DEFINE_PER_CPU(atomic_long_t, active_context); static
> > > > +DEFINE_PER_CPU(unsigned long, reserved_context);
> > > > +
> > > > +static bool check_update_reserved_context(unsigned long cntx,
> > > > + unsigned long newcntx) {
> > > > + int cpu;
> > > > + bool hit = false;
> > > > +
> > > > + /*
> > > > + * Iterate over the set of reserved CONTEXT looking for a match.
> > > > + * If we find one, then we can update our mm to use new CONTEXT
> > > > + * (i.e. the same CONTEXT in the current_version) but we can't
> > > > + * exit the loop early, since we need to ensure that all copies
> > > > + * of the old CONTEXT are updated to reflect the mm. Failure to do
> > > > + * so could result in us missing the reserved CONTEXT in a future
> > > > + * version.
> > > > + */
> > > > + for_each_possible_cpu(cpu) {
> > > > + if (per_cpu(reserved_context, cpu) == cntx) {
> > > > + hit = true;
> > > > + per_cpu(reserved_context, cpu) = newcntx;
> > > > + }
> > > > + }
> > > > +
> > > > + return hit;
> > > > +}
> > > > +
> > > > +/* Note: must be called with context_lock held */ static void
> > > > +__flush_context(void) {
> > > > + int i;
> > > > + unsigned long cntx;
> > > > +
> > > > + /* Update the list of reserved ASIDs and the ASID bitmap. */
> > > > + bitmap_clear(context_asid_map, 0, num_asids);
> > > > +
> > > > + /* Mark already acitve ASIDs as used */
> > > > + for_each_possible_cpu(i) {
> > > > + cntx = atomic_long_xchg_relaxed(&per_cpu(active_context, i),
> 0);
> > > > + /*
> > > > + * If this CPU has already been through a rollover, but
> > > > + * hasn't run another task in the meantime, we must preserve
> > > > + * its reserved CONTEXT, as this is the only trace we have of
> > > > + * the process it is still running.
> > > > + */
> > > > + if (cntx == 0)
> > > > + cntx = per_cpu(reserved_context, i);
> > > > +
> > > > + __set_bit(cntx & asid_mask, context_asid_map);
> > > > + per_cpu(reserved_context, i) = cntx;
> > > > + }
> > > > +
> > > > + /* Mark ASID #0 as used because it is used at boot-time */
> > > > + __set_bit(0, context_asid_map);
> > > > +
> > > > + /* Queue a TLB invalidation for each CPU on next context-switch */
> > > > + cpumask_setall(&context_tlb_flush_pending);
> > > > +}
> > > > +
> > > > +/* Note: must be called with context_lock held */ static unsigned
> > > > +long __new_context(struct mm_struct *mm) {
> > > > + static u32 cur_idx = 1;
> > > > + unsigned long cntx = atomic_long_read(&mm->context.id);
> > > > + unsigned long asid, ver =
> > > > +atomic_long_read(&current_version);
> > > > +
> > > > + if (cntx != 0) {
> > > > + unsigned long newcntx = ver | (cntx & asid_mask);
> > > > +
> > > > + /*
> > > > + * If our current CONTEXT was active during a rollover, we
> > > > + * can continue to use it and this was just a false alarm.
> > > > + */
> > > > + if (check_update_reserved_context(cntx, newcntx))
> > > > + return newcntx;
> > > > +
> > > > + /*
> > > > + * We had a valid CONTEXT in a previous life, so try to
> > > > + * re-use it if possible.
> > > > + */
> > > > + if (!__test_and_set_bit(cntx & asid_mask, context_asid_map))
> > > > + return newcntx;
> > > > + }
> > > > +
> > > > + /*
> > > > + * Allocate a free ASID. If we can't find one then increment
> > > > + * current_version and flush all ASIDs.
> > > > + */
> > > > + asid = find_next_zero_bit(context_asid_map, num_asids, cur_idx);
> > > > + if (asid != num_asids)
> > > > + goto set_asid;
> > > > +
> > > > + /* We're out of ASIDs, so increment current_version */
> > > > + ver = atomic_long_add_return_relaxed(num_asids,
> > > > + &current_version);
> > > > +
> > > > + /* Flush everything */
> > > > + __flush_context();
> > > > +
> > > > + /* We have more ASIDs than CPUs, so this will always succeed */
> > > > + asid = find_next_zero_bit(context_asid_map, num_asids, 1);
> > > > +
> > > > +set_asid:
> > > > + __set_bit(asid, context_asid_map);
> > > > + cur_idx = asid;
> > > > + return asid | ver;
> > > > +}
> > > > +
> > > > +static void set_mm_asid(struct mm_struct *mm, unsigned int cpu) {
> > > > + unsigned long flags;
> > > > + bool need_flush_tlb = false;
> > > > + unsigned long cntx, old_active_cntx;
> > > > +
> > > > + cntx = atomic_long_read(&mm->context.id);
> > > > +
> > > > + /*
> > > > + * If our active_context is non-zero and the context matches the
> > > > + * current_version, then we update the active_context entry with a
> > > > + * relaxed cmpxchg.
> > > > + *
> > > > + * Following is how we handle racing with a concurrent rollover:
> > > > + *
> > > > + * - We get a zero back from the cmpxchg and end up waiting on the
> > > > + * lock. Taking the lock synchronises with the rollover and so
> > > > + * we are forced to see the updated verion.
> > > > + *
> > > > + * - We get a valid context back from the cmpxchg then we continue
> > > > + * using old ASID because __flush_context() would have marked
> ASID
> > > > + * of active_context as used and next context switch we will
> allocate
> > > > + * new context.
> > > > + */
> > > > + old_active_cntx = atomic_long_read(&per_cpu(active_context,
> cpu));
> > > > + if (old_active_cntx &&
> > > > + ((cntx & ~asid_mask) == atomic_long_read(&current_version))
> &&
> > > > + atomic_long_cmpxchg_relaxed(&per_cpu(active_context, cpu),
> > > > + old_active_cntx, cntx))
> > > > + goto switch_mm_fast;
> > > > +
> > > > + raw_spin_lock_irqsave(&context_lock, flags);
> > > > +
> > > > + /* Check that our ASID belongs to the current_version. */
> > > > + cntx = atomic_long_read(&mm->context.id);
> > > > + if ((cntx & ~asid_mask) != atomic_long_read(&current_version)) {
> > > > + cntx = __new_context(mm);
> > > > + atomic_long_set(&mm->context.id, cntx);
> > > > + }
> > > > +
> > > > + if (cpumask_test_and_clear_cpu(cpu,
> &context_tlb_flush_pending))
> > > > + need_flush_tlb = true;
> > > > +
> > > > + atomic_long_set(&per_cpu(active_context, cpu), cntx);
> > > > +
> > > > + raw_spin_unlock_irqrestore(&context_lock, flags);
> > > > +
> > > > +switch_mm_fast:
> > > > + /*
> > > > + * Use the old spbtr name instead of using the current satp
> > > > + * name to support binutils 2.29 which doesn't know about the
> > > > + * privileged ISA 1.10 yet.
> > > > + */
> > > > + csr_write(sptbr, virt_to_pfn(mm->pgd) |
> > > > + ((cntx & asid_mask) << SATP_ASID_SHIFT) |
> > > > + SATP_MODE);
> > > > +
> > > > + if (need_flush_tlb)
> > > > + local_flush_tlb_all(); }
> > > > +
> > > > +static void set_mm_noasid(struct mm_struct *mm) {
> > > > + /*
> > > > + * Use the old spbtr name instead of using the current satp
> > > > + * name to support binutils 2.29 which doesn't know about the
> > > > + * privileged ISA 1.10 yet.
> > > > + */
> > > > + csr_write(sptbr, virt_to_pfn(mm->pgd) | SATP_MODE);
> > > > +
> > > > + /*
> > > > + * sfence.vma after SATP write. We call it on MM context instead of
> > > > + * calling local_flush_tlb_all to prevent global mappings from being
> > > > + * affected.
> > > > + */
> > > > + local_flush_tlb_mm(mm);
> > > > +}
> > > > +
> > > > /*
> > > > * When necessary, performs a deferred icache flush for the given
> > > > MM
> > context,
> > > > * on the local CPU. RISC-V has no direct mechanism for
> > > > instruction cache @@ -58,20 +258,61 @@ void switch_mm(struct
> > > > mm_struct *prev, struct
> > mm_struct *next,
> > > > cpumask_clear_cpu(cpu, mm_cpumask(prev));
> > > > cpumask_set_cpu(cpu, mm_cpumask(next));
> > > >
> > > > + if (use_asid_allocator)
> > > > + set_mm_asid(next, cpu);
> > > > + else
> > > > + set_mm_noasid(next);
> > > > +
> > > > + flush_icache_deferred(next); }
> > > > +
> > > > +static int asids_init(void)
> > > > +{
> > > > + unsigned long old;
> > > > +
> > > > + /* Figure-out number of ASID bits in HW */
> > > > + old = csr_read(sptbr);
> > > > + asid_bits = old | (SATP_ASID_MASK << SATP_ASID_SHIFT);
> > > > + csr_write(sptbr, asid_bits);
> > > > + asid_bits = (csr_read(sptbr) >> SATP_ASID_SHIFT) &
> SATP_ASID_MASK;
> > > > + asid_bits = fls_long(asid_bits);
> > > > + csr_write(sptbr, old);
> > > > +
> > > > /*
> > > > - * Use the old spbtr name instead of using the current satp
> > > > - * name to support binutils 2.29 which doesn't know about the
> > > > - * privileged ISA 1.10 yet.
> > > > + * In the process of determining number of ASID bits (above)
> > > > + * we polluted the TLB of current HART so let's do TLB flushed
> > > > + * to remove unwanted TLB enteries.
> > > > */
> > > > - csr_write(sptbr, virt_to_pfn(next->pgd) | SATP_MODE);
> > > > + local_flush_tlb_all();
> > > > +
> > > > + /* Pre-compute ASID details */
> > > > + num_asids = 1 << asid_bits;
> > > > + asid_mask = num_asids - 1;
> > > >
> > > > /*
> > > > - * sfence.vma after SATP write. We call it on MM context instead of
> > > > - * calling local_flush_tlb_all to prevent global mappings from being
> > > > - * affected.
> > > > + * Use ASID allocator only if number of HW ASIDs are
> > > > + * at-least twice more than CPUs
> > > > */
> > > > - local_flush_tlb_mm(next);
> > > > + use_asid_allocator =
> > > > + (num_asids <= (2 * num_possible_cpus())) ? false :
> > > > + true;
> > > >
> > > > - flush_icache_deferred(next);
> > > > -}
> > > > + /* Setup ASID allocator if available */
> > > > + if (use_asid_allocator) {
> > > > + atomic_long_set(&current_version, num_asids);
> > > > +
> > > > + context_asid_map = kcalloc(BITS_TO_LONGS(num_asids),
> > > > + sizeof(*context_asid_map), GFP_KERNEL);
> > > > + if (!context_asid_map)
> > > > + panic("Failed to allocate bitmap for %lu ASIDs\n",
> > > > + num_asids);
> > > > +
> > > > + __set_bit(0, context_asid_map);
> > > >
> > > > + pr_info("ASID allocator using %lu entries\n", num_asids);
> > > > + } else {
> > > > + pr_info("ASID allocator disabled\n");
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +early_initcall(asids_init);