[PATCH V5 08/16] PCI: dwc: Add support to enable CDM register check

From: Vidya Sagar
Date: Wed Apr 24 2019 - 01:22:09 EST


Add support to enable CDM (Configuration Dependent Module) register check
for any data corruption based on the device-tree flag 'enable-cdm-check'.

Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
Acked-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
---
Changes since [v4]:
* None

Changes since [v3]:
* None

Changes since [v2]:
* Changed code and commit description to reflect change in flag from
'cdm-check' to 'enable-cdm-check'

Changes since [v1]:
* This is a new patch in v2 series

drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
2 files changed, 16 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 417ee51ae502..535b72292f53 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -561,4 +561,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+ if (of_property_read_bool(np, "enable-cdm-check")) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
+ val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
+ PCIE_PL_CHK_REG_CHK_REG_START;
+ dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
+ }
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 67307842e003..0b3323932fed 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -83,6 +83,15 @@
#define PCIE_MISC_CONTROL_1_OFF 0x8BC
#define PCIE_DBI_RO_WR_EN BIT(0)

+#define PCIE_PL_CHK_REG_CONTROL_STATUS 0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR 0xB28
+
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
--
2.17.1