Re: [PATCH] phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

[Paul Kocialkowski]

Hi,

Le jeudi 14 mars 2019 Ã 14:05 +0100, Paul Kocialkowski a Ãcrit :
> On platforms where the MUSB and HCI controllers share PHY0, PHY passby
> is required when using the HCI controller with the PHY, but it must be
> disabled when the MUSB controller is used instead.
> 
> Without this, PHY0 passby is always enabled, which results in broken
> peripheral mode on such platforms (e.g. H3/H5).
> 
> Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")

Does anyone have feedback about this? I was hoping to get it merged
rather soon since it pretty much fixes USB gadget on H3/R40/V3/V3s.

Cheers,

Paul

> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> ---
>  drivers/phy/allwinner/phy-sun4i-usb.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
> index 5163097b43df..7b23920e0068 100644
> --- a/drivers/phy/allwinner/phy-sun4i-usb.c
> +++ b/drivers/phy/allwinner/phy-sun4i-usb.c
> @@ -551,6 +551,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
>  	struct sun4i_usb_phy_data *data =
>  		container_of(work, struct sun4i_usb_phy_data, detect.work);
>  	struct phy *phy0 = data->phys[0].phy;
> +	struct sun4i_usb_phy *phy = phy_get_drvdata(phy0);
>  	bool force_session_end, id_notify = false, vbus_notify = false;
>  	int id_det, vbus_det;
>  
> @@ -607,6 +608,9 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
>  			mutex_unlock(&phy0->mutex);
>  		}
>  
> +		/* Enable PHY0 passby for host mode only. */
> +		sun4i_usb_phy_passby(phy, !id_det);
> +
>  		/* Re-route PHY0 if necessary */
>  		if (data->cfg->phy0_dual_route)
>  			sun4i_usb_phy0_reroute(data, id_det);
-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com