Re: [PATCH v5 3/4] dt-bindings: arm: coresight: Unify funnel DT binding

From: Suzuki K Poulose
Date: Fri Apr 12 2019 - 06:41:07 EST


On 04/12/2019 11:27 AM, Leo Yan wrote:
Following the same fashion with replicator DT binding, this patch is to
unify the DT binding for funnel to support static and dynamic modes;
finally we get the funnel DT binding as below:

Before patch:

Static funnel, aka. non-configurable funnel:
Not supported;

Dynamic funnel, aka. configurable funnel:
"arm,coresight-funnel", "arm,primecell";

After patch:

Static funnel:
"arm,coresight-static-funnel";

Dynamic funnel:
"arm,coresight-dynamic-funnel", "arm,primecell";
"arm,coresight-funnel", "arm,primecell"; (obsolete)

At the end of this patch, it gives an example for static funnel DT
binding, and updates the dynamic funnel example.

Cc: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Cc: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
Cc: Wanglai Shi <shiwanglai@xxxxxxxxxxxxx>
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
.../devicetree/bindings/arm/coresight.txt | 53 +++++++++++++++++--
1 file changed, 48 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index d02d160fa8ac..8a88ddebc1a2 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -8,7 +8,8 @@ through the intermediate links connecting the source to the currently selected
sink. Each CoreSight component device should use these properties to describe
its hardware characteristcs.
-* Required properties for all components *except* non-configurable replicators:
+* Required properties for all components *except* non-configurable replicators
+ and non-configurable funnels:
* compatible: These have to be supplemented with "arm,primecell" as
drivers are using the AMBA bus interface. Possible values include:
@@ -24,8 +25,10 @@ its hardware characteristcs.
discovered at boot time when the device is probed.
"arm,coresight-tmc", "arm,primecell";
- - Trace Funnel:
- "arm,coresight-funnel", "arm,primecell";
+ - Trace Programmable Funnel:
+ "arm,coresight-dynamic-funnel", "arm,primecell";
+ "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
+ backward compatibility and will be removed)
- Embedded Trace Macrocell (version 3.x) and
Program Flow Trace Macrocell:
@@ -65,7 +68,7 @@ its hardware characteristcs.
"stm-stimulus-base", each corresponding to the areas defined in "reg".
* Required properties for devices that don't show up on the AMBA bus, such as
- non-configurable replicators:
+ non-configurable replicators and non-configurable funnels:
* compatible: Currently supported value is (note the absence of the
AMBA markee):
@@ -74,6 +77,9 @@ its hardware characteristcs.
"arm,coresight-replicator"; (OBSOLETE. For backward
compatibility and will be removed)
+ - Coresight Non-configurable Funnel:
+ "arm,coresight-static-funnel";
+
* port or ports: see "Graph bindings for Coresight" below.
* Optional properties for ETM/PTMs:
@@ -203,8 +209,45 @@ Example:
};
};
+ funnel {
+ /*
+ * non-configurable funnel don't show up on the AMBA
+ * bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-funnel";
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ combo_funnel_out: endpoint {
+ remote-endpoint = <&top_funnel_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ combo_funnel_in0: endpoint {
+ remote-endpoint = <&cluster0_etf_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ combo_funnel_in1: endpoint {
+ remote-endpoint = <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
funnel@20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&oscclk6a>;



Reviewed-by: Suzuki K Poulose <suzuki.poulose@xxxxxxx>