Re: [PATCH v5 7/9] clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data

[Stephen Boyd]

Quoting Weiyi Lu (2019-03-04 21:05:44)
> In previous MediaTek PLL design, it assumes the pcw change control
> is always on the CON1 register.
> However, the pcw change bit on MT8183 was moved onto CON0 because
> the the PCW length of audio PLLs are extended to 32-bit.
> Add configurable pcw_chg_reg to set the pcw change control register
> address or using the default control register CON1 if without
> setting in pll data.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> ---

Applied to clk-next