Re: [PATCH v1] arm: dts: mediatek: add basic support for MT7629 SoC

From: Rob Herring
Date: Thu Mar 28 2019 - 11:06:17 EST


On Wed, Mar 13, 2019 at 04:42:15PM +0800, ryder.lee@xxxxxxxxxx wrote:
> From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
>
> This adds basic support for MT7629 reference board.
>
> Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> ---
> Changes since v1:
> -Fix unit-address warnings.
> -Put all the mmio peripherals under a simple-bus node.
> -Drop all the 'partitions' nodes in flash node.
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/mt7629-rfb.dts | 203 ++++++++++++++++
> arch/arm/boot/dts/mt7629.dtsi | 370 ++++++++++++++++++++++++++++++
> include/dt-bindings/reset/mt7629-resets.h | 71 ++++++
> 4 files changed, 645 insertions(+)
> create mode 100644 arch/arm/boot/dts/mt7629-rfb.dts
> create mode 100644 arch/arm/boot/dts/mt7629.dtsi
> create mode 100644 include/dt-bindings/reset/mt7629-resets.h
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index bd40148..a5a6d9f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1231,6 +1231,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
> mt7623a-rfb-nand.dtb \
> mt7623n-rfb-emmc.dtb \
> mt7623n-bananapi-bpi-r2.dtb \
> + mt7629-rfb.dtb \
> mt8127-moose.dtb \
> mt8135-evbp1.dtb
> dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
> diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
> new file mode 100644
> index 0000000..a47dd7e
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629-rfb.dts
> @@ -0,0 +1,203 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "mt7629.dtsi"
> +
> +/ {
> + model = "MediaTek MT7629 reference board";
> + compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + reset {
> + label = "factory";
> + linux,code = <KEY_RESTART>;
> + gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> + };
> +
> + wps {
> + label = "wps";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&pio 58 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x10000000>;
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + reg_5v: regulator-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "fixed-5V";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +};
> +
> +&i2c {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c_pins>;
> + status = "okay";
> +};
> +
> +&qspi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&qspi_pins>;
> + status = "okay";
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +};
> +
> +&pio {
> + eth_pins: eth-pins {
> + mux {
> + function = "eth";
> + groups = "mdc_mdio";
> + };
> + };
> +
> + ephy_leds_pins: ephy-leds-pins {
> + mux {
> + function = "led";
> + groups = "gphy_leds_0", "ephy_leds";
> + };
> + };
> +
> + i2c_pins: i2c-pins {
> + mux {
> + function = "i2c";
> + groups = "i2c_0";
> + };
> +
> + conf {
> + pins = "I2C_SDA", "I2C_SCL";
> + drive-strength = <4>;
> + bias-disable;
> + };
> + };
> +
> + pcie_pins: pcie-pins {
> + mux {
> + function = "pcie";
> + groups = "pcie_clkreq",
> + "pcie_pereset",
> + "pcie_wake";
> + };
> + };
> +
> + pwm_pins: pwm-pins {
> + mux {
> + function = "pwm";
> + groups = "pwm_0";
> + };
> + };
> +
> + /* Serial NAND is shared pin with SPI-NOR */
> + serial_nand_pins: serial-nand-pins {
> + mux {
> + function = "flash";
> + groups = "snfi";
> + };
> + };
> +
> + spi_pins: spi-pins {
> + mux {
> + function = "spi";
> + groups = "spi_0";
> + };
> + };
> +
> + /* SPI-NOR is shared pin with serial NAND */
> + qspi_pins: qspi-pins {
> + mux {
> + function = "flash";
> + groups = "spi_nor";
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + mux {
> + function = "uart";
> + groups = "uart0_txd_rxd" ;
> + };
> + };
> +
> + uart1_pins: uart1-pins {
> + mux {
> + function = "uart";
> + groups = "uart1_0_tx_rx" ;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + mux {
> + function = "uart";
> + groups = "uart2_0_txd_rxd" ;
> + };
> + };
> +
> + watchdog_pins: watchdog-pins {
> + mux {
> + function = "watchdog";
> + groups = "watchdog";
> + };
> + };
> +};
> +
> +&spi {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi_pins>;
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins>;
> + status = "okay";
> +};
> +
> +&ssusb {
> + vusb33-supply = <&reg_3p3v>;
> + vbus-supply = <&reg_5v>;
> + status = "okay";
> +};
> +
> +&u3phy1 {
> + status = "okay";
> +};
> +
> +&watchdog {
> + pinctrl-names = "default";
> + pinctrl-0 = <&watchdog_pins>;
> + status = "okay";
> +};
> \ No newline at end of file

Fix this.

> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> new file mode 100644
> index 0000000..0197660
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -0,0 +1,370 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + *
> + * Author: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7629-clk.h>
> +#include <dt-bindings/power/mt7622-power.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/reset/mt7629-resets.h>
> +
> +/ {
> + compatible = "mediatek,mt7629";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "mediatek,mt6589-smp";
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x0>;
> + clock-frequency = <1250000000>;
> + cci-control-port = <&cci_control2>;
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0x1>;
> + clock-frequency = <1250000000>;
> + cci-control-port = <&cci_control2>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a7-pmu";
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-affinity = <&cpu0>, <&cpu1>;
> + };
> +
> + clk20m: oscillator-0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <20000000>;
> + clock-output-names = "clk20m";
> + };
> +
> + clk40m: oscillator-1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <40000000>;
> + clock-output-names = "clkxtal";
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> + clock-frequency = <20000000>;
> + arm,cpu-registers-not-fw-configured;

New systems should not have this. Fix the firmware.

> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;

Do you really have any addresses and/or sizes greater than 4GB within
this node?

> + compatible = "simple-bus";
> + ranges;
> +
> + infracfg: syscon@10000000 {
> + compatible = "mediatek,mt7629-infracfg", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon@10002000 {
> + compatible = "mediatek,mt7629-pericfg", "syscon";
> + reg = <0 0x10002000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + scpsys: scpsys@10006000 {
> + compatible = "mediatek,mt7629-scpsys",
> + "mediatek,mt7622-scpsys";
> + #power-domain-cells = <1>;
> + reg = <0 0x10006000 0 0x1000>;
> + clocks = <&topckgen CLK_TOP_HIF_SEL>;
> + clock-names = "hif_sel";
> + assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
> + infracfg = <&infracfg>;
> + };
> +
> + timer: timer@10009000 {
> + compatible = "mediatek,mt7629-timer",
> + "mediatek,mt6765-timer";
> + reg = <0 0x10009000 0 0x60>;
> + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk20m>;
> + clock-names = "clk20m";
> + };
> +
> + sysirq: interrupt-controller@10200a80 {
> + compatible = "mediatek,mt7629-sysirq",
> + "mediatek,mt6577-sysirq";
> + reg = <0 0x10200a80 0 0x20>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + };
> +
> + apmixedsys: syscon@10209000 {
> + compatible = "mediatek,mt7629-apmixedsys", "syscon";
> + reg = <0 0x10209000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + rng: rng@1020f000 {
> + compatible = "mediatek,mt7629-rng",
> + "mediatek,mt7623-rng";
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&infracfg CLK_INFRA_TRNG_PD>;
> + clock-names = "rng";
> + };
> +
> + topckgen: syscon@10210000 {
> + compatible = "mediatek,mt7629-topckgen", "syscon";
> + reg = <0 0x10210000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + watchdog: watchdog@10212000 {
> + compatible = "mediatek,mt7629-wdt",
> + "mediatek,mt6589-wdt";
> + reg = <0 0x10212000 0 0x100>;
> + };
> +
> + pio: pinctrl@10217000 {
> + compatible = "mediatek,mt7629-pinctrl";
> + reg = <0 0x10217000 0 0x8000>,
> + <0 0x10005000 0 0x1000>;
> + reg-names = "base", "eint";
> + gpio-controller;
> + gpio-ranges = <&pio 0 0 79>;
> + #gpio-cells = <2>;
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + };
> +
> + gic: interrupt-controller@10300000 {
> + compatible = "arm,gic-400";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10310000 0 0x1000>,
> + <0 0x10320000 0 0x1000>,
> + <0 0x10340000 0 0x2000>,
> + <0 0x10360000 0 0x2000>;
> + };
> +
> + cci: cci@10390000 {
> + compatible = "arm,cci-400";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0x10390000 0 0x1000>;
> + ranges = <0 0 0x10390000 0x10000>;
> +
> + cci_control0: slave-if@1000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace-lite";
> + reg = <0x1000 0x1000>;
> + };
> +
> + cci_control1: slave-if@4000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x4000 0x1000>;
> + };
> +
> + cci_control2: slave-if@5000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x5000 0x1000>;
> + };
> +
> + pmu@9000 {
> + compatible = "arm,cci-400-pmu,r1";
> + reg = <0x9000 0x5000>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt7629-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x400>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UART_SEL>,
> + <&pericfg CLK_PERI_UART0_PD>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt7629-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x400>;
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UART_SEL>,
> + <&pericfg CLK_PERI_UART1_PD>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt7629-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x400>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UART_SEL>,
> + <&pericfg CLK_PERI_UART2_PD>;
> + clock-names = "baud", "bus";
> + status = "disabled";
> + };
> +
> + i2c: i2c@11007000 {
> + compatible = "mediatek,mt7629-i2c",
> + "mediatek,mt2712-i2c";
> + reg = <0 0x11007000 0 0x90>,
> + <0 0x11000100 0 0x80>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <4>;
> + clocks = <&pericfg CLK_PERI_I2C0_PD>,
> + <&pericfg CLK_PERI_AP_DMA_PD>;
> + clock-names = "main", "dma";
> + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi: spi@1100a000 {
> + compatible = "mediatek,mt7629-spi",
> + "mediatek,mt7622-spi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0 0x1100a000 0 0x100>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
> + <&topckgen CLK_TOP_SPI0_SEL>,
> + <&pericfg CLK_PERI_SPI0_PD>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + status = "disabled";
> + };
> +
> + qspi: spi@11014000 {
> + compatible = "mediatek,mt7629-nor",
> + "mediatek,mt8173-nor";
> + reg = <0 0x11014000 0 0xe0>;
> + clocks = <&pericfg CLK_PERI_FLASH_PD>,
> + <&topckgen CLK_TOP_FLASH_SEL>;
> + clock-names = "spi", "sf";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + ssusbsys: syscon@1a000000 {
> + compatible = "mediatek,mt7629-ssusbsys", "syscon";
> + reg = <0 0x1a000000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + ssusb: usb@1a0c0000 {
> + compatible = "mediatek,mt7629-xhci",
> + "mediatek,mtk-xhci";
> + reg = <0 0x1a0c0000 0 0x01000>,
> + <0 0x1a0c3e00 0 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
> + <&ssusbsys CLK_SSUSB_REF_EN>,
> + <&ssusbsys CLK_SSUSB_MCU_EN>,
> + <&ssusbsys CLK_SSUSB_DMA_EN>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> + assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
> + <&topckgen CLK_TOP_SATA_SEL>,
> + <&topckgen CLK_TOP_HIF_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
> + <&topckgen CLK_TOP_UNIVPLL2_D4>,
> + <&topckgen CLK_TOP_UNIVPLL1_D2>;
> + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u3port0 PHY_TYPE_USB3>;
> + status = "disabled";
> + };
> +
> + u3phy1: usb-phy@1a0c4000 {
> + compatible = "mediatek,generic-tphy-v1";
> + reg = <0 0x1a0c4000 0 0x300>;
> + #address-cells = <2>;
> + #size-cells = <2>;

Only need 1 cell for these.

> + ranges;
> + status = "disabled";
> +
> + u2port0: usb-phy@1a0c4300 {
> + reg = <0 0x1a0c4300 0 0x100>;

Use a non-empty ranges and just provide the offset.

> + clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> +
> + u3port0: usb-phy@1a1c4900 {
> + reg = <0 0x1a1c4900 0 0x700>;
> + clocks = <&clk20m>;
> + clock-names = "ref";
> + #phy-cells = <1>;
> + status = "okay";
> + };
> + };
> +
> + pciesys: syscon@1a100800 {
> + compatible = "mediatek,mt7629-pciesys", "syscon";
> + reg = <0 0x1a100800 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + ethsys: syscon@1b000000 {
> + compatible = "mediatek,mt7629-ethsys", "syscon";
> + reg = <0 0x1b000000 0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + sgmiisys0: syscon@1b128000 {
> + compatible = "mediatek,mt7629-sgmiisys", "syscon";
> + reg = <0 0x1b128000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + sgmiisys1: syscon@1b130000 {
> + compatible = "mediatek,mt7629-sgmiisys", "syscon";
> + reg = <0 0x1b130000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> + };
> +};
> diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
> new file mode 100644
> index 0000000..6bb8573
> --- /dev/null
> +++ b/include/dt-bindings/reset/mt7629-resets.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
> +
> +/* INFRACFG resets */
> +#define MT7629_INFRA_EMI_MPU_RST 0
> +#define MT7629_INFRA_UART5_RST 2
> +#define MT7629_INFRA_CIRQ_EINT_RST 3
> +#define MT7629_INFRA_APXGPT_RST 4
> +#define MT7629_INFRA_SCPSYS_RST 5
> +#define MT7629_INFRA_KP_RST 6
> +#define MT7629_INFRA_SPI1_RST 7
> +#define MT7629_INFRA_SPI4_RST 8
> +#define MT7629_INFRA_SYSTIMER_RST 9
> +#define MT7629_INFRA_IRRX_RST 10
> +#define MT7629_INFRA_AO_BUS_RST 16
> +#define MT7629_INFRA_EMI_RST 32
> +#define MT7629_INFRA_APMIXED_RST 35
> +#define MT7629_INFRA_MIPI_RST 36
> +#define MT7629_INFRA_TRNG_RST 37
> +#define MT7629_INFRA_SYSCIRQ_RST 38
> +#define MT7629_INFRA_MIPI_CSI_RST 39
> +#define MT7629_INFRA_GCE_FAXI_RST 40
> +#define MT7629_INFRA_I2C_SRAM_RST 41
> +#define MT7629_INFRA_IOMMU_RST 47
> +
> +/* PERICFG resets */
> +#define MT7629_PERI_UART0_SW_RST 0
> +#define MT7629_PERI_UART1_SW_RST 1
> +#define MT7629_PERI_UART2_SW_RST 2
> +#define MT7629_PERI_BTIF_SW_RST 6
> +#define MT7629_PERI_PWN_SW_RST 8
> +#define MT7629_PERI_DMA_SW_RST 11
> +#define MT7629_PERI_NFI_SW_RST 14
> +#define MT7629_PERI_I2C0_SW_RST 22
> +#define MT7629_PERI_SPI0_SW_RST 33
> +#define MT7629_PERI_SPI1_SW_RST 34
> +#define MT7629_PERI_FLASHIF_SW_RST 36
> +
> +/* PCIe Subsystem resets */
> +#define MT7629_PCIE1_CORE_RST 19
> +#define MT7629_PCIE1_MMIO_RST 20
> +#define MT7629_PCIE1_HRST 21
> +#define MT7629_PCIE1_USER_RST 22
> +#define MT7629_PCIE1_PIPE_RST 23
> +#define MT7629_PCIE0_CORE_RST 27
> +#define MT7629_PCIE0_MMIO_RST 28
> +#define MT7629_PCIE0_HRST 29
> +#define MT7629_PCIE0_USER_RST 30
> +#define MT7629_PCIE0_PIPE_RST 31
> +
> +/* SSUSB Subsystem resets */
> +#define MT7629_SSUSB_PHY_PWR_RST 3
> +#define MT7629_SSUSB_MAC_PWR_RST 4
> +
> +/* ETH Subsystem resets */
> +#define MT7629_ETHSYS_SYS_RST 0
> +#define MT7629_ETHSYS_MCM_RST 2
> +#define MT7629_ETHSYS_HSDMA_RST 5
> +#define MT7629_ETHSYS_FE_RST 6
> +#define MT7629_ETHSYS_ESW_RST 16
> +#define MT7629_ETHSYS_GMAC_RST 23
> +#define MT7629_ETHSYS_EPHY_RST 24
> +#define MT7629_ETHSYS_CRYPTO_RST 29
> +#define MT7629_ETHSYS_PPE_RST 31
> +
> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
> --
> 1.9.1
>