[PATCH v2 2/3] ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA

From: Andrey Smirnov
Date: Wed Mar 27 2019 - 02:35:19 EST


Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA result in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA functionality. Fix the code
to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting
incorrect clock ratio.

Fixes: 25aaa75df1e6 ("dmaengine: imx-sdma: add clock ratio 1:1 check")
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Angus Ainslie (Purism) <angus@xxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index df0c59519886..b16a123990a2 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -820,7 +820,7 @@
compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_SDMA>,
+ clocks = <&clks IMX6SX_CLK_IPG>,
<&clks IMX6SX_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
--
2.20.1