[PATCH V3 1/3] dt-bindings: hwmon: Add tachometer interrupt to pwm-fan

From: Stefan Wahren
Date: Fri Mar 22 2019 - 04:25:12 EST


This adds the tachometer interrupt to the pwm-fan binding, which is
necessary for RPM support.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
---
.../devicetree/bindings/hwmon/pwm-fan.txt | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 49ca5d8..722005f 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -7,7 +7,16 @@ Required properties:
which correspond to thermal cooling states

Optional properties:
-- fan-supply : phandle to the regulator that provides power to the fan
+- fan-supply : phandle to the regulator that provides power to the fan
+- interrupts : This contains a single interrupt specifier which
+ describes the tachometer output of the fan as an
+ interrupt source. The output signal must generate a
+ defined number of interrupts per fan revolution, which
+ require that it must be self resetting edge interrupts.
+ See interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the tachometer pulses per fan revolution as
+ an integer (default is 2 interrupts per revolution).
+ The value must be greater than zero.

Example:
fan0: pwm-fan {
@@ -38,3 +47,14 @@ Example:
};
};
};
+
+Example 2:
+ fan0: pwm-fan {
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 40000 0>;
+ fan-supply = <&reg_fan>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ pulses-per-revolution = <2>;
+ };
--
2.7.4