Re: [RFC PATCH RESEND 3/3] mm: Add write-protect and clean utilities for address space ranges

From: Thomas Hellstrom
Date: Thu Mar 21 2019 - 16:29:41 EST


On Thu, 2019-03-21 at 10:12 -0400, Jerome Glisse wrote:
> On Thu, Mar 21, 2019 at 01:22:41PM +0000, Thomas Hellstrom wrote:
> > Add two utilities to a) write-protect and b) clean all ptes
> > pointing into
> > a range of an address space
> > The utilities are intended to aid in tracking dirty pages (either
> > driver-allocated system memory or pci device memory).
> > The write-protect utility should be used in conjunction with
> > page_mkwrite() and pfn_mkwrite() to trigger write page-faults on
> > page
> > accesses. Typically one would want to use this on sparse accesses
> > into
> > large memory regions. The clean utility should be used to utilize
> > hardware dirtying functionality and avoid the overhead of page-
> > faults,
> > typically on large accesses into small memory regions.
>
> Again this does not use mmu notifier and there is no scary comment to
> explain the very limited use case it should be use for ie mmap of a
> device file and only by the device driver.

Scary comment and asserts will be added.

>
> Using it ouside of this would break softdirty or trigger false COW or
> other scary thing.

This is something that should clearly be avoided if at all possible.
False COWs could be avoided by asserting that VMAs are shared. I need
to look deaper into softdirty, but note that the __mkwrite / dirty /
clean pattern is already used in a very similar way in
drivers/video/fb_defio.c although it operates only on real pages one at
a time.

>
> > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Matthew Wilcox <willy@xxxxxxxxxxxxx>
> > Cc: Will Deacon <will.deacon@xxxxxxx>
> > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > Cc: Rik van Riel <riel@xxxxxxxxxxx>
> > Cc: Minchan Kim <minchan@xxxxxxxxxx>
> > Cc: Michal Hocko <mhocko@xxxxxxxx>
> > Cc: Huang Ying <ying.huang@xxxxxxxxx>
> > Cc: Souptick Joarder <jrdr.linux@xxxxxxxxx>
> > Cc: "JÃrÃme Glisse" <jglisse@xxxxxxxxxx>
> > Cc: linux-mm@xxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Signed-off-by: Thomas Hellstrom <thellstrom@xxxxxxxxxx>
> > ---
> > include/linux/mm.h | 9 +-
> > mm/Makefile | 2 +-
> > mm/apply_as_range.c | 257
> > ++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 266 insertions(+), 2 deletions(-)
> > create mode 100644 mm/apply_as_range.c
> >
> > diff --git a/include/linux/mm.h b/include/linux/mm.h
> > index b7dd4ddd6efb..62f24dd0bfa0 100644
> > --- a/include/linux/mm.h
> > +++ b/include/linux/mm.h
> > @@ -2642,7 +2642,14 @@ struct pfn_range_apply {
> > };
> > extern int apply_to_pfn_range(struct pfn_range_apply *closure,
> > unsigned long address, unsigned long
> > size);
> > -
> > +unsigned long apply_as_wrprotect(struct address_space *mapping,
> > + pgoff_t first_index, pgoff_t nr);
> > +unsigned long apply_as_clean(struct address_space *mapping,
> > + pgoff_t first_index, pgoff_t nr,
> > + pgoff_t bitmap_pgoff,
> > + unsigned long *bitmap,
> > + pgoff_t *start,
> > + pgoff_t *end);
> > #ifdef CONFIG_PAGE_POISONING
> > extern bool page_poisoning_enabled(void);
> > extern void kernel_poison_pages(struct page *page, int numpages,
> > int enable);
> > diff --git a/mm/Makefile b/mm/Makefile
> > index d210cc9d6f80..a94b78f12692 100644
> > --- a/mm/Makefile
> > +++ b/mm/Makefile
> > @@ -39,7 +39,7 @@ obj-y := filemap.o mempool.o
> > oom_kill.o fadvise.o \
> > mm_init.o mmu_context.o percpu.o
> > slab_common.o \
> > compaction.o vmacache.o \
> > interval_tree.o list_lru.o workingset.o \
> > - debug.o $(mmu-y)
> > + debug.o apply_as_range.o $(mmu-y)
> >
> > obj-y += init-mm.o
> > obj-y += memblock.o
> > diff --git a/mm/apply_as_range.c b/mm/apply_as_range.c
> > new file mode 100644
> > index 000000000000..9f03e272ebd0
> > --- /dev/null
> > +++ b/mm/apply_as_range.c
> > @@ -0,0 +1,257 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +#include <linux/mm.h>
> > +#include <linux/mm_types.h>
> > +#include <linux/hugetlb.h>
> > +#include <linux/bitops.h>
> > +#include <asm/cacheflush.h>
> > +#include <asm/tlbflush.h>
> > +
> > +/**
> > + * struct apply_as - Closure structure for apply_as_range
> > + * @base: struct pfn_range_apply we derive from
> > + * @start: Address of first modified pte
> > + * @end: Address of last modified pte + 1
> > + * @total: Total number of modified ptes
> > + * @vma: Pointer to the struct vm_area_struct we're currently
> > operating on
> > + * @flush_cache: Whether to call a cache flush before modifying a
> > pte
> > + * @flush_tlb: Whether to flush the tlb after modifying a pte
> > + */
> > +struct apply_as {
> > + struct pfn_range_apply base;
> > + unsigned long start, end;
> > + unsigned long total;
> > + const struct vm_area_struct *vma;
> > + u32 flush_cache : 1;
> > + u32 flush_tlb : 1;
> > +};
> > +
> > +/**
> > + * apply_pt_wrprotect - Leaf pte callback to write-protect a pte
> > + * @pte: Pointer to the pte
> > + * @token: Page table token, see apply_to_pfn_range()
> > + * @addr: The virtual page address
> > + * @closure: Pointer to a struct pfn_range_apply embedded in a
> > + * struct apply_as
> > + *
> > + * The function write-protects a pte and records the range in
> > + * virtual address space of touched ptes for efficient TLB
> > flushes.
> > + *
> > + * Return: Always zero.
> > + */
> > +static int apply_pt_wrprotect(pte_t *pte, pgtable_t token,
> > + unsigned long addr,
> > + struct pfn_range_apply *closure)
> > +{
> > + struct apply_as *aas = container_of(closure, typeof(*aas),
> > base);
> > +
> > + if (pte_write(*pte)) {
> > + set_pte_at(closure->mm, addr, pte,
> > pte_wrprotect(*pte));
>
> So there is no flushing here, even for x96 this is wrong. It
> should be something like:
> ptep_clear_flush()
> flush_cache_page() // if pte is pointing to a regular page
> set_pte_at()
> update_mmu_cache()
>

Here cache flushing is done before any leaf function is called.
According to 1) that should be equivalent, although flushing cache in
the leaf function is probably more efficient for most use cases. Both
these functions are no-ops for both x86 and ARM64 where they most
likely will be used...

For ptep_clear_flush() the TLB flushing is here instead deferred to
after all leaf functions have been called. It looks like if the PTE is
dirty, the TLB has no business touching it until then anyway, it should
be happy with its cached value.

Since flushing a single tlb page involves a broadcast across all cores,
I believe flushing a range is a pretty important optimization.

Also for update_mmu_cache() the impression I got from its docs is that
it should only be used when increasing pte permissions, like in fault
handlers, not the opposite?

>
> > + aas->total++;
> > + if (addr < aas->start)
> > + aas->start = addr;
> > + if (addr + PAGE_SIZE > aas->end)
> > + aas->end = addr + PAGE_SIZE;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * struct apply_as_clean - Closure structure for apply_as_clean
> > + * @base: struct apply_as we derive from
> > + * @bitmap_pgoff: Address_space Page offset of the first bit in
> > @bitmap
> > + * @bitmap: Bitmap with one bit for each page offset in the
> > address_space range
> > + * covered.
> > + * @start: Address_space page offset of first modified pte
> > + * @end: Address_space page offset of last modified pte
> > + */
> > +struct apply_as_clean {
> > + struct apply_as base;
> > + pgoff_t bitmap_pgoff;
> > + unsigned long *bitmap;
> > + pgoff_t start, end;
> > +};
> > +
> > +/**
> > + * apply_pt_clean - Leaf pte callback to clean a pte
> > + * @pte: Pointer to the pte
> > + * @token: Page table token, see apply_to_pfn_range()
> > + * @addr: The virtual page address
> > + * @closure: Pointer to a struct pfn_range_apply embedded in a
> > + * struct apply_as_clean
> > + *
> > + * The function cleans a pte and records the range in
> > + * virtual address space of touched ptes for efficient TLB
> > flushes.
> > + * It also records dirty ptes in a bitmap representing page
> > offsets
> > + * in the address_space, as well as the first and last of the bits
> > + * touched.
> > + *
> > + * Return: Always zero.
> > + */
> > +static int apply_pt_clean(pte_t *pte, pgtable_t token,
> > + unsigned long addr,
> > + struct pfn_range_apply *closure)
> > +{
> > + struct apply_as *aas = container_of(closure, typeof(*aas),
> > base);
> > + struct apply_as_clean *clean = container_of(aas,
> > typeof(*clean), base);
> > +
> > + if (pte_dirty(*pte)) {
> > + pgoff_t pgoff = ((addr - aas->vma->vm_start) >>
> > PAGE_SHIFT) +
> > + aas->vma->vm_pgoff - clean->bitmap_pgoff;
> > +
> > + set_pte_at(closure->mm, addr, pte, pte_mkclean(*pte));
>
> Clearing the dirty bit is racy, it should be done with write protect
> instead as the dirty bit can be set again just after you clear it.
> So i am not sure what is the usage pattern where you want to clear
> that bit without write protect.

If it's set again, then it will be picked up at the next GPU command
submission referencing this page i. e. the next run of this function.
What we're after here is to get to all pages that were dirtied *before*
this call. The raciness and remedy (if desired) is mentioned in the
comments to the exported function below. Typically users write-protect
before scanning dirty bits only if transitioning to mkwrite-dirtying.
The important thing is that we don't accidently clear dirty bits
without picking them up.

>
> You also need proper page flushing with flush_cache_page()
>
> > + aas->total++;
> > + if (addr < aas->start)
> > + aas->start = addr;
> > + if (addr + PAGE_SIZE > aas->end)
> > + aas->end = addr + PAGE_SIZE;
> > +
> > + __set_bit(pgoff, clean->bitmap);
> > + clean->start = min(clean->start, pgoff);
> > + clean->end = max(clean->end, pgoff + 1);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * apply_as_range - Apply a pte callback to all PTEs pointing into
> > a range
> > + * of an address_space.
> > + * @mapping: Pointer to the struct address_space
> > + * @aas: Closure structure
> > + * @first_index: First page offset in the address_space
> > + * @nr: Number of incremental page offsets to cover
> > + *
> > + * Return: Number of ptes touched. Note that this number might be
> > larger
> > + * than @nr if there are overlapping vmas
> > + */
>
> This comment need to be _scary_ it should only be use for device
> driver
> vma ie device driver mapping.
>
> > +static unsigned long apply_as_range(struct address_space *mapping,
> > + struct apply_as *aas,
> > + pgoff_t first_index, pgoff_t nr)
> > +{
> > + struct vm_area_struct *vma;
> > + pgoff_t vba, vea, cba, cea;
> > + unsigned long start_addr, end_addr;
> > +
> > + /* FIXME: Is a read lock sufficient here? */
> > + down_write(&mapping->i_mmap_rwsem);
>
> read would be sufficient and you should use i_mmap_lock_read() not
> the down_write/read API.
>
> > + vma_interval_tree_foreach(vma, &mapping->i_mmap, first_index,
> > + first_index + nr - 1) {
> > + aas->base.mm = vma->vm_mm;
> > +
> > + /* Clip to the vma */
> > + vba = vma->vm_pgoff;
> > + vea = vba + vma_pages(vma);
> > + cba = first_index;
> > + cba = max(cba, vba);
> > + cea = first_index + nr;
> > + cea = min(cea, vea);
> > +
> > + /* Translate to virtual address */
> > + start_addr = ((cba - vba) << PAGE_SHIFT) + vma-
> > >vm_start;
> > + end_addr = ((cea - vba) << PAGE_SHIFT) + vma->vm_start;
> > +
> > + /*
> > + * TODO: Should caches be flushed individually on
> > demand
> > + * in the leaf-pte callbacks instead? That is, how
> > + * costly are inter-core interrupts in an SMP system?
> > + */
> > + if (aas->flush_cache)
> > + flush_cache_range(vma, start_addr, end_addr);
>
> flush_cache_range() is a noop on most architecture what you really
> need
> is proper per page flushing see above.

From the docs 1) they are interchangeable. But I will change to
per-page cache flushing anyway.


>
> > + aas->start = end_addr;
> > + aas->end = start_addr;
> > + aas->vma = vma;
> > +
> > + /* Should not error since aas->base.alloc == 0 */
> > + WARN_ON(apply_to_pfn_range(&aas->base, start_addr,
> > + end_addr - start_addr));
> > + if (aas->flush_tlb && aas->end > aas->start)
> > + flush_tlb_range(vma, aas->start, aas->end);
> > + }
> > + up_write(&mapping->i_mmap_rwsem);
> > +
> > + return aas->total;
> > +}
> > +
> > +/**
> > + * apply_as_wrprotect - Write-protect all ptes in an address_space
> > range
> > + * @mapping: The address_space we want to write protect
> > + * @first_index: The first page offset in the range
> > + * @nr: Number of incremental page offsets to cover
> > + *
> > + * Return: The number of ptes actually write-protected. Note that
> > + * already write-protected ptes are not counted.
> > + */
>
> It should be scary and limited to mapping of device file.
>

Agreed.

>
> > +unsigned long apply_as_wrprotect(struct address_space *mapping,
> > + pgoff_t first_index, pgoff_t nr)
> > +{
> > + struct apply_as aas = {
> > + .base = {
> > + .alloc = 0,
> > + .ptefn = apply_pt_wrprotect,
> > + },
> > + .total = 0,
> > + .flush_cache = 1,
> > + .flush_tlb = 1
> > + };
> > +
> > + return apply_as_range(mapping, &aas, first_index, nr);
> > +}
> > +EXPORT_SYMBOL(apply_as_wrprotect);
> > +
> > +/**
> > + * apply_as_clean - Clean all ptes in an address_space range
> > + * @mapping: The address_space we want to clean
> > + * @first_index: The first page offset in the range
> > + * @nr: Number of incremental page offsets to cover
> > + * @bitmap_pgoff: The page offset of the first bit in @bitmap
> > + * @bitmap: Pointer to a bitmap of at least @nr bits. The bitmap
> > needs to
> > + * cover the whole range @first_index..@first_index + @nr.
> > + * @start: Pointer to page offset of the first set bit in @bitmap,
> > or if
> > + * none set the value pointed to should be @bitmap_pgoff + @nr.
> > The value
> > + * is modified as new bits are set by the function.
> > + * @end: Page offset of the last set bit in @bitmap + 1 or
> > @bitmap_pgoff if
> > + * none set. The value is modified as new bets are set by the
> > function.
> > + *
> > + * Note: When this function returns there is no guarantee that a
> > CPU has
> > + * not already dirtied new ptes. However it will not clean any
> > ptes not
> > + * reported in the bitmap.
> > + *
> > + * If a caller needs to make sure all dirty ptes are picked up and
> > none
> > + * additional are added, it first needs to write-protect the
> > address-space
> > + * range and make sure new writers are blocked in page_mkwrite()
> > or
> > + * pfn_mkwrite(). And then after a TLB flush following the write-
> > protection
> > + * pick upp all dirty bits.
> > + *
> > + * Return: The number of dirty ptes actually cleaned.
> > + */
>
> It should be scary and limited to mapping of device file.
>
> Cheers,
> JÃrÃme

1) Documentation/cachetlb.txt

Thanks!

Thomas