[PATCH v5 4/8] arm64: dts: sdm845: Add UFS PHY reset

[Evan Green]

Wire up the reset controller in the Qcom UFS controller for the PHY.
This will be used to toggle PHY reset during initialization of the PHY.

Signed-off-by: Evan Green <evgreen@xxxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---

Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5308f1671824..66c77146585b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1033,6 +1033,7 @@
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			power-domains = <&gcc UFS_PHY_GDSC>;
+			#reset-cells = <1>;
 
 			iommus = <&apps_smmu 0x100 0xf>;
 
@@ -1078,6 +1079,8 @@
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
 				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
 
+			resets = <&ufs_mem_hc 0>;
+			reset-names = "ufsphy";
 			status = "disabled";
 
 			ufs_mem_phy_lanes: lanes@1d87400 {
-- 
2.20.1