RE: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id

[Steve Twiss]

Hi Fabio,

On 20 March 2019 12:17, Fabio Estevam wrote:
> Subject: Re: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id
> 
> Hi Steve,
> 
> On Wed, Mar 20, 2019 at 9:06 AM Steve Twiss
> <stwiss.opensource@xxxxxxxxxxx> wrote:
> >
> > The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as
> > 'rgmii' instead of 'rgmii-id'. Meaning the RX and TX delays that were
> 
> This patch declares it as 'rgmii-id', which contradicts the commit log.

The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as
'rgmii' instead of 'rgmii-id'.

Can that be read two ways?
I meant the phy-mode is currently qualified as 'rgmii' instead of what it
should be: 'rgmii-id'.

[...]

> > This patch fixes the network problems seen on the Freescale i.MX6Q/DL
> 
> Please provide a Fixes tag. It would be good to know if this fix needs
> to be applied to older kernels.

I didn't put a Fixes tag in because I find this patch fixes v5.1-rc1 (which I see as broken).
But the patch is not needed in v5.0 because I see that as working.
So didn't see the need for a Cc: stable.

Regards,
Steve