[PATCH v10 0/2] PWM support for HiFive Unleashed

From: Yash Shah
Date: Mon Mar 18 2019 - 07:47:41 EST


This patch series adds a PWM driver and DT documentation
for HiFive Unleashed board. The patches are mostly based on
Wesley's patch.

v10
- Use DIV_ROUND_CLOSEST_ULL instead of div_u64_round
- Change 'num' defination to u64 bit (in pwm_sifive_apply).
- Remove the usage of pwm_get_state()

v9
- Use appropriate bitfield macros
- Add approx_period in pwm_sifive_ddata struct and related changes
- Correct the eqn for calculation of frac (in pwm_sifive_apply)
- Other minor fixes

v8
- Typo corrections
- Remove active_user and related code
- Do not clear PWM_SIFIVE_PWMCFG_EN_ALWAYS
- Other minor fixes

v7
- Modify description of compatible property in DT documentation
- Use mutex locks at appropriate places
- Fix all bad line breaks
- Allow enabling/disabling PWM only when the user is the only active user
- Remove Deglitch logic
- Other minor fixes

v6
- Remove the global property 'sifive,period-ns'
- Implement free and request callbacks to maintain user counts.
- Add user_count member to struct pwm_sifive_ddata
- Allow period change only if user_count is one
- Add pwm_sifive_enable function to enable/disable PWM
- Change calculation logic of frac (in pwm_sifive_apply)
- Remove state correction
- Remove pwm_sifive_xlate function
- Clock to be enabled only when PWM is enabled
- Other minor fixes

v5
- Correct the order of compatible string properties
- PWM state correction to be done always
- Other minor fixes based upon feedback on v4

v4
- Rename macros with appropriate names
- Remove unused macros
- Rename struct sifive_pwm_device to struct pwm_sifive_ddata
- Rename function prefix as per driver name
- Other minor fixes based upon feedback on v3

v3
- Add a link to the reference manaul
- Use appropriate apis for division operation
- Add check for polarity
- Enable clk before calling clk_get_rate
- Other minor fixes based upon feedback on v2

V2 changed from V1:
- Remove inclusion of dt-bindings/pwm/pwm.h
- Remove artificial alignments
- Replace ioread32/iowrite32 with readl/writel
- Remove camelcase
- Change dev_info to dev_dbg for unnecessary log
- Correct typo in driver name
- Remove use of of_match_ptr macro
- Update the DT compatible strings and Add reference to a common
versioning document

Yash Shah (2):
pwm: sifive: Add DT documentation for SiFive PWM Controller
pwm: sifive: Add a driver for SiFive SoC PWM

.../devicetree/bindings/pwm/pwm-sifive.txt | 33 ++
drivers/pwm/Kconfig | 11 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sifive.c | 334 +++++++++++++++++++++
4 files changed, 379 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-sifive.txt
create mode 100644 drivers/pwm/pwm-sifive.c

--
1.9.1