[PATCH 0/2] w1: DS2408 fixes

[Mariusz Bialonczyk]

Hi,
I prepared a two fixes related with 1wire and DS2408.

In short the problem was that a single DS2408 slave was properly setting
the output value to a channel access write but the command was returning
error.
Moreover when there was a write of a 0xff value (all inputs off, there was 
also no problem - it's now also understandable for me after looking
at the transmission log) ;)
This problem doesn't occur on a multidrop bus.

Finally I was able to catch the problems recently after analyzing the
oscilloscope waveforms in PulseView.
After those fixes all is now working perfectly fine - no matter if it
is multidrop or single slave bus :)

ps. if you are merging this please also take into account a patch which
I've sent recently but it is still not merged:
https://lore.kernel.org/lkml/20190304112336.21397-1-manio@xxxxxxxxxx/

regards,
Mariusz Białończyk | xmpp/e-mail: manio@xxxxxxxxxx
https://skyboo.net | https://github.com/manio

Mariusz Bialonczyk (2):
  w1: ds2408: add a missing reset when retrying in output_write()
  w1: fix the resume command API

 drivers/w1/slaves/w1_ds2408.c | 13 ++++++++-----
 drivers/w1/w1_io.c            | 11 +++++++++--
 2 files changed, 17 insertions(+), 7 deletions(-)

-- 
2.19.0.rc1