[PATCH 1/2] staging: iio: adc: ad7192: Use DT clock binding

From: Mircea Caprioru
Date: Fri Mar 15 2019 - 07:29:23 EST


This patch replaces the platform data clock select member with DT clock
binding. Through the DT the external clock binding is specified. If this is
not provided then the device will use the internal clock source.

With the external clock binding there is the option to use a clock or a
crystal as the clock source. When an external crystal is used it is
connected to MCLK1 and MCLK2 pins. If the external clock is used only MCLK2
pin will be connected.

Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
---
drivers/staging/iio/adc/ad7192.c | 84 ++++++++++++++++++++++----------
drivers/staging/iio/adc/ad7192.h | 2 -
2 files changed, 58 insertions(+), 28 deletions(-)

diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c
index 27f962b8c4ef..5c54ce380fa5 100644
--- a/drivers/staging/iio/adc/ad7192.c
+++ b/drivers/staging/iio/adc/ad7192.c
@@ -7,6 +7,7 @@
*/

#include <linux/interrupt.h>
+#include <linux/clk.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -156,14 +157,16 @@
struct ad7192_state {
struct regulator *avdd;
struct regulator *dvdd;
+ struct clk *mclk;
u16 int_vref_mv;
- u32 mclk;
+ u32 fclk;
u32 f_order;
u32 mode;
u32 conf;
u32 scale_avail[8][2];
u8 gpocon;
u8 devid;
+ u8 clock_sel;
struct mutex lock; /* protect sensor state */

struct ad_sigma_delta sd;
@@ -226,6 +229,27 @@ static inline bool ad7192_valid_external_frequency(u32 freq)
freq <= AD7192_EXT_FREQ_MHZ_MAX);
}

+static int ad7192_of_clock_select(struct ad7192_state *st)
+{
+ struct device_node *np = st->sd.spi->dev.of_node;
+ unsigned int clock_sel;
+
+ clock_sel = AD7192_CLK_INT;
+
+ /* use internal clock */
+ if (PTR_ERR(st->mclk) == -ENOENT) {
+ if (of_property_read_bool(np, "adi,int-clock-output-enable"))
+ clock_sel = AD7192_CLK_INT_CO;
+ } else {
+ if (of_property_read_bool(np, "adi,clock-xtal"))
+ clock_sel = AD7192_CLK_EXT_MCLK1_2;
+ else
+ clock_sel = AD7192_CLK_EXT_MCLK2;
+ }
+
+ return clock_sel;
+}
+
static int ad7192_setup(struct ad7192_state *st,
const struct ad7192_platform_data *pdata)
{
@@ -250,28 +274,8 @@ static int ad7192_setup(struct ad7192_state *st,
dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
id);

- switch (pdata->clock_source_sel) {
- case AD7192_CLK_INT:
- case AD7192_CLK_INT_CO:
- st->mclk = AD7192_INT_FREQ_MHZ;
- break;
- case AD7192_CLK_EXT_MCLK1_2:
- case AD7192_CLK_EXT_MCLK2:
- if (ad7192_valid_external_frequency(pdata->ext_clk_hz)) {
- st->mclk = pdata->ext_clk_hz;
- break;
- }
- dev_err(&st->sd.spi->dev, "Invalid frequency setting %u\n",
- pdata->ext_clk_hz);
- ret = -EINVAL;
- goto out;
- default:
- ret = -EINVAL;
- goto out;
- }
-
st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
- AD7192_MODE_CLKSRC(pdata->clock_source_sel) |
+ AD7192_MODE_CLKSRC(st->clock_sel) |
AD7192_MODE_RATE(480);

st->conf = AD7192_CONF_GAIN(0);
@@ -496,7 +500,7 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
*val -= 273 * ad7192_get_temp_scale(unipolar);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
- *val = st->mclk /
+ *val = st->fclk /
(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
return IIO_VAL_INT;
}
@@ -543,7 +547,7 @@ static int ad7192_write_raw(struct iio_dev *indio_dev,
break;
}

- div = st->mclk / (val * st->f_order * 1024);
+ div = st->fclk / (val * st->f_order * 1024);
if (div < 1 || div > 1023) {
ret = -EINVAL;
break;
@@ -706,15 +710,42 @@ static int ad7192_probe(struct spi_device *spi)
if (ret)
goto error_disable_dvdd;

+ st->fclk = AD7192_INT_FREQ_MHZ;
+
+ st->mclk = devm_clk_get(&st->sd.spi->dev, "mclk");
+ if (IS_ERR(st->mclk) && PTR_ERR(st->mclk) != -ENOENT) {
+ ret = PTR_ERR(st->mclk);
+ goto error_remove_trigger;
+ }
+
+ st->clock_sel = ad7192_of_clock_select(st);
+
+ if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+ st->clock_sel == AD7192_CLK_EXT_MCLK2) {
+ ret = clk_prepare_enable(st->mclk);
+ if (ret < 0)
+ goto error_remove_trigger;
+
+ st->fclk = clk_get_rate(st->mclk);
+ if (!ad7192_valid_external_frequency(st->fclk)) {
+ ret = -EINVAL;
+ dev_err(&spi->dev,
+ "External clock frequency out of bounds\n");
+ goto error_disable_clk;
+ }
+ }
+
ret = ad7192_setup(st, pdata);
if (ret)
- goto error_remove_trigger;
+ goto error_disable_clk;

ret = iio_device_register(indio_dev);
if (ret < 0)
- goto error_remove_trigger;
+ goto error_disable_clk;
return 0;

+error_disable_clk:
+ clk_disable_unprepare(st->mclk);
error_remove_trigger:
ad_sd_cleanup_buffer_and_trigger(indio_dev);
error_disable_dvdd:
@@ -731,6 +762,7 @@ static int ad7192_remove(struct spi_device *spi)
struct ad7192_state *st = iio_priv(indio_dev);

iio_device_unregister(indio_dev);
+ clk_disable_unprepare(st->mclk);
ad_sd_cleanup_buffer_and_trigger(indio_dev);

regulator_disable(st->dvdd);
diff --git a/drivers/staging/iio/adc/ad7192.h b/drivers/staging/iio/adc/ad7192.h
index 7433a43c2611..3be3ee269ed5 100644
--- a/drivers/staging/iio/adc/ad7192.h
+++ b/drivers/staging/iio/adc/ad7192.h
@@ -33,8 +33,6 @@

struct ad7192_platform_data {
u16 vref_mv;
- u8 clock_source_sel;
- u32 ext_clk_hz;
bool refin2_en;
bool rej60_en;
bool sinc3_en;
--
2.17.1