Re: [PATCH 03/18] drm/mediatek: redefine mtk_ddp_sout_sel

[Yongqiang Niu]

On Tue, 2018-12-25 at 11:57 +0800, Nicolas Boichat wrote:
> On Mon, Dec 24, 2018 at 6:52 PM Yongqiang Niu
> <yongqiang.niu@xxxxxxxxxxxx> wrote:
> >
> > This patch redefine mtk_ddp_sout_sel
> 
> Can you describe a bit more why you are making this change?

the format of "mtk_ddp_sout_sel"was not flexible, after we add more
mediatek SOC support, that will be redundant

set this function format like mtk_ddp_mout_en and mtk_ddp_sel_in

> 
> > Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 32 ++++++++++++++++++++------------
> >  1 file changed, 20 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > index adb37e4..592f852 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> > @@ -405,21 +405,27 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> >         return value;
> >  }
> >
> > -static void mtk_ddp_sout_sel(void __iomem *config_regs,
> > -                            enum mtk_ddp_comp_id cur,
> > -                            enum mtk_ddp_comp_id next)
> > +static unsigned int mtk_ddp_sout_sel(void __iomem *config_regs,
> 
> You don't use config_regs anymore, drop it.

ok, will drop it in next version

> 
> > +                                    enum mtk_ddp_comp_id cur,
> > +                                    enum mtk_ddp_comp_id next,
> > +                                    unsigned int *addr)
> >  {
> > +       unsigned int value;
> > +
> >         if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> > -               writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
> > -                              config_regs + DISP_REG_CONFIG_OUT_SEL);
> > +               *addr = DISP_REG_CONFIG_OUT_SEL;
> > +               value = BLS_TO_DSI_RDMA1_TO_DPI1;
> 
> You can directly return BLS_TO_DSI_RDMA1_TO_DPI1.

just format this like mtk_ddp_mout_en and mtk_ddp_sel_in

> 
> >         } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> > -               writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
> > -                              config_regs + DISP_REG_CONFIG_OUT_SEL);
> > -               writel_relaxed(DSI_SEL_IN_RDMA,
> > -                              config_regs + DISP_REG_CONFIG_DSI_SEL);
> > -               writel_relaxed(DPI_SEL_IN_BLS,
> > -                              config_regs + DISP_REG_CONFIG_DPI_SEL);
> > +               *addr = DISP_REG_CONFIG_OUT_SEL;
> > +               value = BLS_TO_DPI_RDMA1_TO_DSI;
> 
> I (kind of) understand the change above, as you still end up writing
> BLS_TO_DSI_RDMA1_TO_DPI1 in DISP_REG_CONFIG_OUT_SEL.
> 
> This changes the behaviour, as now you only write
> BLS_TO_DPI_RDMA1_TO_DSI to DISP_REG_CONFIG_OUT_SEL, but the previous
> revision of the code would also write to DISP_REG_CONFIG_DSI_SEL and
> DISP_REG_CONFIG_DPI_SEL. Why?
> 

DISP_REG_CONFIG_DSI_SEL set in the next lines.
DPI_SEL_IN_BLS is 0 for DISP_REG_CONFIG_DPI_SEL set, and hardware
default setting is also 0, so this one is no need anymore

> > +       } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DSI0) {
> > +               *addr = DISP_REG_CONFIG_DSI_SEL;
> > +               value = DSI_SEL_IN_RDMA;
> > +       } else {
> > +               value = 0;
> >         }
> > +
> > +       return value;
> >  }
> >
> >  void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
> > @@ -434,7 +440,9 @@ void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
> >                 writel_relaxed(reg, config_regs + addr);
> >         }
> >
> > -       mtk_ddp_sout_sel(config_regs, cur, next);
> > +       value = mtk_ddp_sout_sel(cur, next, &addr);
> > +       if (value)
> > +               writel_relaxed(value, config_regs + addr);
> 
> Why this change? I don't see mtk_ddp_sout_sel being used later in the
> series, so I'm not sure why we don't directly write the value into the
> register.
> 
in the patch "[PATCH 04/18] drm/mediatek: move rdma sout from
mtk_ddp_mout_en into mtk_ddp_sout_sel", i moved all rdma out to here,
rdma only have single out, no multi out.
if keep this format, there will many writel_relaxed in mtk_ddp_sout_sel.
and modify this format like mtk_ddp_mout_en and mtk_ddp_sel_in looks
better.

> 
> 
> >         value = mtk_ddp_sel_in(cur, next, &addr);
> >         if (value) {
> > --
> > 1.8.1.1.dirty
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel