[PATCH v4 5/6] dt-bindings: nvmem: Add bindings for ZynqMP nvmem driver

From: Nava kishore Manne
Date: Thu Mar 14 2019 - 10:02:31 EST


Add documentation to describe Xilinx ZynqMP nvmem driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../bindings/nvmem/xlnx,zynqmp-nvmem.txt | 47 +++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt

diff --git a/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
new file mode 100644
index 000000000000..2043c8284f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/xlnx,zynqmp-nvmem.txt
@@ -0,0 +1,47 @@
+--------------------------------------------------------------------------
+= Zynq UltraScale+ MPSoC nvmem firmware driver binding =
+--------------------------------------------------------------------------
+The nvmem_firmware node provides access to the hardware related data
+like soc revision, IDCODE... etc, By using the firmware interface.
+
+Required properties:
+- compatible: should be "xlnx,zynqmp-nvmem-fw"
+
+= Data cells =
+Are child nodes of silicon id, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+-------
+ Example
+-------
+firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+
+ nvmem_firmware {
+ compatible = "xlnx,zynqmp-nvmem-fw";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* Data cells */
+ soc_revision: soc_revision {
+ reg = <0x0 0x4>;
+ };
+ };
+ };
+};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+ pcap {
+ ...
+
+ nvmem-cells = <&soc_revision>;
+ nvmem-cell-names = "soc_revision";
+
+ ...
+ };
+
--
2.18.0