Re: [PATCH 3/3] DRM: Add KMS driver for the Ingenic JZ47xx SoCs

From: Paul Cercueil
Date: Thu Mar 14 2019 - 08:37:13 EST


Hi Daniel,

Le ven. 1 mars 2019 à 9:26, Daniel Vetter <daniel@xxxxxxxx> a écrit :
On Thu, Feb 28, 2019 at 07:07:56PM -0300, Paul Cercueil wrote:
Add a KMS driver for the Ingenic JZ47xx family of SoCs.
This driver is meant to replace the aging jz4740-fb driver.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>

Yay, more fbdev drivers moving to atmic!

Going on vacations for a week now, so just a few quick high-level comments
below. Those should make the driver even smaller and cleaner.

---
drivers/gpu/drm/Kconfig | 2 +
drivers/gpu/drm/Makefile | 1 +
drivers/gpu/drm/ingenic/Kconfig | 16 +
drivers/gpu/drm/ingenic/Makefile | 1 +
drivers/gpu/drm/ingenic/ingenic-drm.c | 896 ++++++++++++++++++++++++++++++++++
5 files changed, 916 insertions(+)
create mode 100644 drivers/gpu/drm/ingenic/Kconfig
create mode 100644 drivers/gpu/drm/ingenic/Makefile
create mode 100644 drivers/gpu/drm/ingenic/ingenic-drm.c

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index bd943a71756c..f1929112e559 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -303,6 +303,8 @@ source "drivers/gpu/drm/sti/Kconfig"

source "drivers/gpu/drm/imx/Kconfig"

+source "drivers/gpu/drm/ingenic/Kconfig"
+
source "drivers/gpu/drm/v3d/Kconfig"

source "drivers/gpu/drm/vc4/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 1ac55c65eac0..9666c0767f44 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_DRM_TEGRA) += tegra/
obj-$(CONFIG_DRM_STM) += stm/
obj-$(CONFIG_DRM_STI) += sti/
obj-$(CONFIG_DRM_IMX) += imx/
+obj-y += ingenic/
obj-$(CONFIG_DRM_MEDIATEK) += mediatek/
obj-$(CONFIG_DRM_MESON) += meson/
obj-y += i2c/
diff --git a/drivers/gpu/drm/ingenic/Kconfig b/drivers/gpu/drm/ingenic/Kconfig
new file mode 100644
index 000000000000..d82c3d37ec9c
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/Kconfig
@@ -0,0 +1,16 @@
+config DRM_INGENIC
+ tristate "DRM Support for Ingenic SoCs"
+ depends on MIPS || COMPILE_TEST
+ depends on DRM
+ depends on CMA
+ depends on OF
+ select DRM_BRIDGE
+ select DRM_PANEL_BRIDGE
+ select DRM_KMS_HELPER
+ select DRM_KMS_CMA_HELPER
+ select DRM_GEM_CMA_HELPER
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+ help
+ Choose this option for DRM support for the Ingenic SoCs.
+
+ If M is selected the module will be called ingenic-drm.
diff --git a/drivers/gpu/drm/ingenic/Makefile b/drivers/gpu/drm/ingenic/Makefile
new file mode 100644
index 000000000000..11cac42ce0bb
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_DRM_INGENIC) += ingenic-drm.o
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c
new file mode 100644
index 000000000000..18120deea96f
--- /dev/null
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.c
@@ -0,0 +1,896 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Ingenic JZ47xx KMS driver
+//
+// Copyright (C) 2019, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_irq.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_plane.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include <dt-bindings/display/ingenic,drm.h>
+
+#include "../drm_internal.h"
+
+#define JZ_REG_LCD_CFG 0x00
+#define JZ_REG_LCD_VSYNC 0x04
+#define JZ_REG_LCD_HSYNC 0x08
+#define JZ_REG_LCD_VAT 0x0C
+#define JZ_REG_LCD_DAH 0x10
+#define JZ_REG_LCD_DAV 0x14
+#define JZ_REG_LCD_PS 0x18
+#define JZ_REG_LCD_CLS 0x1C
+#define JZ_REG_LCD_SPL 0x20
+#define JZ_REG_LCD_REV 0x24
+#define JZ_REG_LCD_CTRL 0x30
+#define JZ_REG_LCD_STATE 0x34
+#define JZ_REG_LCD_IID 0x38
+#define JZ_REG_LCD_DA0 0x40
+#define JZ_REG_LCD_SA0 0x44
+#define JZ_REG_LCD_FID0 0x48
+#define JZ_REG_LCD_CMD0 0x4C
+#define JZ_REG_LCD_DA1 0x50
+#define JZ_REG_LCD_SA1 0x54
+#define JZ_REG_LCD_FID1 0x58
+#define JZ_REG_LCD_CMD1 0x5C
+
+#define JZ_LCD_CFG_SLCD BIT(31)
+#define JZ_LCD_CFG_PS_DISABLE BIT(23)
+#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
+#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
+#define JZ_LCD_CFG_REV_DISABLE BIT(20)
+#define JZ_LCD_CFG_HSYNCM BIT(19)
+#define JZ_LCD_CFG_PCLKM BIT(18)
+#define JZ_LCD_CFG_INV BIT(17)
+#define JZ_LCD_CFG_SYNC_DIR BIT(16)
+#define JZ_LCD_CFG_PS_POLARITY BIT(15)
+#define JZ_LCD_CFG_CLS_POLARITY BIT(14)
+#define JZ_LCD_CFG_SPL_POLARITY BIT(13)
+#define JZ_LCD_CFG_REV_POLARITY BIT(12)
+#define JZ_LCD_CFG_HSYNC_ACTIVE_LOW BIT(11)
+#define JZ_LCD_CFG_PCLK_FALLING_EDGE BIT(10)
+#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
+#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
+#define JZ_LCD_CFG_18_BIT BIT(7)
+#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
+#define JZ_LCD_CFG_MODE_MASK 0xf
+
+#define JZ_LCD_VSYNC_VPS_OFFSET 16
+#define JZ_LCD_VSYNC_VPE_OFFSET 0
+
+#define JZ_LCD_HSYNC_HPS_OFFSET 16
+#define JZ_LCD_HSYNC_HPE_OFFSET 0
+
+#define JZ_LCD_VAT_HT_OFFSET 16
+#define JZ_LCD_VAT_VT_OFFSET 0
+
+#define JZ_LCD_DAH_HDS_OFFSET 16
+#define JZ_LCD_DAH_HDE_OFFSET 0
+
+#define JZ_LCD_DAV_VDS_OFFSET 16
+#define JZ_LCD_DAV_VDE_OFFSET 0
+
+#define JZ_LCD_CTRL_BURST_4 (0x0 << 28)
+#define JZ_LCD_CTRL_BURST_8 (0x1 << 28)
+#define JZ_LCD_CTRL_BURST_16 (0x2 << 28)
+#define JZ_LCD_CTRL_RGB555 BIT(27)
+#define JZ_LCD_CTRL_OFUP BIT(26)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_16 (0x0 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_4 (0x1 << 24)
+#define JZ_LCD_CTRL_FRC_GRAYSCALE_2 (0x2 << 24)
+#define JZ_LCD_CTRL_PDD_MASK (0xff << 16)
+#define JZ_LCD_CTRL_EOF_IRQ BIT(13)
+#define JZ_LCD_CTRL_SOF_IRQ BIT(12)
+#define JZ_LCD_CTRL_OFU_IRQ BIT(11)
+#define JZ_LCD_CTRL_IFU0_IRQ BIT(10)
+#define JZ_LCD_CTRL_IFU1_IRQ BIT(9)
+#define JZ_LCD_CTRL_DD_IRQ BIT(8)
+#define JZ_LCD_CTRL_QDD_IRQ BIT(7)
+#define JZ_LCD_CTRL_REVERSE_ENDIAN BIT(6)
+#define JZ_LCD_CTRL_LSB_FISRT BIT(5)
+#define JZ_LCD_CTRL_DISABLE BIT(4)
+#define JZ_LCD_CTRL_ENABLE BIT(3)
+#define JZ_LCD_CTRL_BPP_1 0x0
+#define JZ_LCD_CTRL_BPP_2 0x1
+#define JZ_LCD_CTRL_BPP_4 0x2
+#define JZ_LCD_CTRL_BPP_8 0x3
+#define JZ_LCD_CTRL_BPP_15_16 0x4
+#define JZ_LCD_CTRL_BPP_18_24 0x5
+#define JZ_LCD_CTRL_BPP_MASK (JZ_LCD_CTRL_RGB555 | (0x7 << 0))
+
+#define JZ_LCD_CMD_SOF_IRQ BIT(31)
+#define JZ_LCD_CMD_EOF_IRQ BIT(30)
+#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
+
+#define JZ_LCD_SYNC_MASK 0x3ff
+
+#define JZ_LCD_STATE_EOF_IRQ BIT(5)
+#define JZ_LCD_STATE_SOF_IRQ BIT(4)
+#define JZ_LCD_STATE_DISABLED BIT(0)
+
+struct ingenic_framedesc {
+ uint32_t next;
+ uint32_t addr;
+ uint32_t id;
+ uint32_t cmd;
+} __packed;
+
+struct jz_soc_info {
+ bool needs_dev_clk;
+};
+
+struct ingenic_drm {
+ struct device *dev;

Embedding is kinda the new thing, since it also prevents people from using
devm_ for this, which is (strictly speaking, not that it matters much) the
wrong lifetime for drm allocations. There's some patches from Noralf that
should land soon to make this a bit more convenient.

+ void __iomem *base;
+ struct regmap *map;
+ struct clk *lcd_clk, *pix_clk;
+
+ u32 lcd_mode;
+
+ struct ingenic_framedesc *framedesc;
+ dma_addr_t framedesc_phys;
+
+ struct drm_device *drm;
+ struct drm_plane primary;
+ struct drm_crtc crtc;
+ struct drm_connector connector;
+ struct drm_encoder encoder;

Any reason you didn't opt for the drm_simple_display_pipe helpers? Since
you have just 1:1:1 between crtc/plane/encoder that will allow you to
ditch lots of boilerplate.

https://dri.freedesktop.org/docs/drm/gpu/drm-kms-helpers.html#simple-kms-helper-reference

+ struct drm_panel *panel;
+
+ struct device_node *panel_node;

There's panel bridge helpers which takes a panel and wraps it into a
drm_bridge (which you can glue into the simple pipe helpers), giving you
the connector for free.

https://dri.freedesktop.org/docs/drm/gpu/drm-kms-helpers.html#panel-bridge-helper-reference

I'm having some trouble using this; if I use a drm_bridge and attach it
directly to the encoder, how can I get a pointer to the drm_connector?
I need it to retrieve the connector->display_info.bus_flags.

Thanks,
-Paul

This should cover all the bigger items, details look already really tidy.

Cheers, Daniel

+
+ unsigned short ps_start, ps_end, cls_start,
+ cls_end, spl_start, spl_end, rev_start;
+};
+
+static const uint32_t ingenic_drm_primary_formats[] = {
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_XRGB8888,
+};
+
+static bool ingenic_drm_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case JZ_REG_LCD_IID:
+ case JZ_REG_LCD_SA0:
+ case JZ_REG_LCD_FID0:
+ case JZ_REG_LCD_CMD0:
+ case JZ_REG_LCD_SA1:
+ case JZ_REG_LCD_FID1:
+ case JZ_REG_LCD_CMD1:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static const struct regmap_config ingenic_drm_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+
+ .max_register = JZ_REG_LCD_CMD1,
+ .writeable_reg = ingenic_drm_writeable_reg,
+};
+
+static inline struct ingenic_drm *drm_crtc_get_priv(struct drm_crtc *crtc)
+{
+ return container_of(crtc, struct ingenic_drm, crtc);
+}
+
+static inline struct ingenic_drm *drm_plane_get_priv(struct drm_plane *plane)
+{
+ return container_of(plane, struct ingenic_drm, primary);
+}
+
+static inline struct ingenic_drm *drm_conn_get_priv(struct drm_connector *conn)
+{
+ return container_of(conn, struct ingenic_drm, connector);
+}
+
+static void ingenic_drm_crtc_atomic_enable(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+ regmap_write(priv->map, JZ_REG_LCD_STATE, 0);
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+ JZ_LCD_CTRL_ENABLE | JZ_LCD_CTRL_DISABLE,
+ JZ_LCD_CTRL_ENABLE);
+
+ drm_panel_enable(priv->panel);
+
+ drm_crtc_vblank_on(crtc);
+}
+
+static void ingenic_drm_crtc_atomic_disable(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+ unsigned int var;
+
+ drm_crtc_vblank_off(crtc);
+
+ drm_panel_disable(priv->panel);
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+ JZ_LCD_CTRL_DISABLE, JZ_LCD_CTRL_DISABLE);
+
+ regmap_read_poll_timeout(priv->map, JZ_REG_LCD_STATE, var,
+ var & JZ_LCD_STATE_DISABLED,
+ 1000, 0);
+}
+
+static inline bool ingenic_drm_lcd_is_special_mode(u32 mode)
+{
+ switch (mode) {
+ case JZ_DRM_LCD_SPECIAL_TFT_1:
+ case JZ_DRM_LCD_SPECIAL_TFT_2:
+ case JZ_DRM_LCD_SPECIAL_TFT_3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static inline bool ingenic_drm_lcd_is_stn_mode(u32 mode)
+{
+ switch (mode) {
+ case JZ_DRM_LCD_SINGLE_COLOR_STN:
+ case JZ_DRM_LCD_SINGLE_MONOCHROME_STN:
+ case JZ_DRM_LCD_DUAL_COLOR_STN:
+ case JZ_DRM_LCD_DUAL_MONOCHROME_STN:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv,
+ struct drm_display_mode *mode)
+{
+ unsigned int vpe, vds, vde, vt, hpe, hds, hde, ht;
+
+ vpe = mode->vsync_end - mode->vsync_start;
+ vds = mode->vtotal - mode->vsync_start;
+ vde = vds + mode->vdisplay;
+ vt = vde + mode->vsync_start - mode->vdisplay;
+
+ hpe = mode->hsync_end - mode->hsync_start;
+ hds = mode->htotal - mode->hsync_start;
+ hde = hds + mode->hdisplay;
+ ht = hde + mode->hsync_start - mode->hdisplay;
+
+ regmap_write(priv->map, JZ_REG_LCD_VSYNC,
+ 0 << JZ_LCD_VSYNC_VPS_OFFSET |
+ vpe << JZ_LCD_VSYNC_VPE_OFFSET);
+
+ regmap_write(priv->map, JZ_REG_LCD_HSYNC,
+ 0 << JZ_LCD_HSYNC_HPS_OFFSET |
+ hpe << JZ_LCD_HSYNC_HPE_OFFSET);
+
+ regmap_write(priv->map, JZ_REG_LCD_VAT,
+ ht << JZ_LCD_VAT_HT_OFFSET |
+ vt << JZ_LCD_VAT_VT_OFFSET);
+
+ regmap_write(priv->map, JZ_REG_LCD_DAH,
+ hds << JZ_LCD_DAH_HDS_OFFSET |
+ hde << JZ_LCD_DAH_HDE_OFFSET);
+ regmap_write(priv->map, JZ_REG_LCD_DAV,
+ vds << JZ_LCD_DAV_VDS_OFFSET |
+ vde << JZ_LCD_DAV_VDE_OFFSET);
+
+ if (ingenic_drm_lcd_is_special_mode(priv->lcd_mode)) {
+ regmap_write(priv->map, JZ_REG_LCD_PS, hde << 16 | (hde + 1));
+ regmap_write(priv->map, JZ_REG_LCD_CLS, hde << 16 | (hde + 1));
+ regmap_write(priv->map, JZ_REG_LCD_SPL, hpe << 16 | (hpe + 1));
+ regmap_write(priv->map, JZ_REG_LCD_REV, mode->htotal << 16);
+ }
+}
+
+static void ingenic_drm_crtc_update_cfg(struct ingenic_drm *priv,
+ struct drm_display_mode *mode)
+
+{
+ unsigned int cfg = priv->lcd_mode;
+ u32 bus_flags = priv->connector.display_info.bus_flags;
+
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ cfg |= JZ_LCD_CFG_VSYNC_ACTIVE_LOW;
+ if (bus_flags & DRM_BUS_FLAG_DE_LOW)
+ cfg |= JZ_LCD_CFG_DE_ACTIVE_LOW;
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
+ cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE;
+
+ if (ingenic_drm_lcd_is_special_mode(priv->lcd_mode)) {
+ // TODO: Is that valid for all special modes?
+ cfg |= JZ_LCD_CFG_REV_POLARITY;
+ } else {
+ cfg |= JZ_LCD_CFG_PS_DISABLE
+ | JZ_LCD_CFG_CLS_DISABLE
+ | JZ_LCD_CFG_SPL_DISABLE
+ | JZ_LCD_CFG_REV_DISABLE;
+ }
+
+ regmap_write(priv->map, JZ_REG_LCD_CFG, cfg);
+}
+
+static void ingenic_drm_crtc_update_ctrl(struct ingenic_drm *priv,
+ unsigned int bpp)
+{
+ unsigned int ctrl = JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16;
+
+ switch (bpp) {
+ case 1:
+ ctrl |= JZ_LCD_CTRL_BPP_1;
+ break;
+ case 2:
+ ctrl |= JZ_LCD_CTRL_BPP_2;
+ break;
+ case 4:
+ ctrl |= JZ_LCD_CTRL_BPP_4;
+ break;
+ case 8:
+ ctrl |= JZ_LCD_CTRL_BPP_8;
+ break;
+ case 15:
+ ctrl |= JZ_LCD_CTRL_RGB555; /* Falltrough */
+ case 16:
+ ctrl |= JZ_LCD_CTRL_BPP_15_16;
+ break;
+ case 18:
+ case 24:
+ case 32:
+ ctrl |= JZ_LCD_CTRL_BPP_18_24;
+ break;
+ default:
+ break;
+ }
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+ JZ_LCD_CTRL_OFUP | JZ_LCD_CTRL_BURST_16 |
+ JZ_LCD_CTRL_BPP_MASK, ctrl);
+}
+
+static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+ long rate;
+
+ if (!drm_atomic_crtc_needs_modeset(state))
+ return 0;
+
+ rate = clk_round_rate(priv->pix_clk,
+ state->adjusted_mode.clock * 1000);
+ if (rate < 0)
+ return rate;
+
+ return 0;
+}
+
+static void ingenic_drm_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *oldstate)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+ struct drm_crtc_state *state = crtc->state;
+ struct drm_pending_vblank_event *event = state->event;
+ struct drm_framebuffer *drm_fb = crtc->primary->state->fb;
+ const struct drm_format_info *finfo;
+ unsigned int width, height;
+
+ if (drm_atomic_crtc_needs_modeset(state)) {
+ finfo = drm_format_info(drm_fb->format->format);
+ width = state->adjusted_mode.hdisplay;
+ height = state->adjusted_mode.vdisplay;
+
+ ingenic_drm_crtc_update_timings(priv, &state->mode);
+
+ ingenic_drm_crtc_update_ctrl(priv, finfo->depth);
+ ingenic_drm_crtc_update_cfg(priv, &state->adjusted_mode);
+
+ clk_set_rate(priv->pix_clk, state->adjusted_mode.clock * 1000);
+
+ regmap_write(priv->map, JZ_REG_LCD_DA0, priv->framedesc->next);
+ }
+
+ if (event) {
+ state->event = NULL;
+
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (drm_crtc_vblank_get(crtc) == 0)
+ drm_crtc_arm_vblank_event(crtc, event);
+ else
+ drm_crtc_send_vblank_event(crtc, event);
+ spin_unlock_irq(&crtc->dev->event_lock);
+ }
+}
+
+static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *oldstate)
+{
+ struct ingenic_drm *priv = drm_plane_get_priv(plane);
+ struct drm_plane_state *state = plane->state;
+ const struct drm_format_info *finfo;
+ unsigned int width, height;
+
+ finfo = drm_format_info(state->fb->format->format);
+ width = state->crtc->state->adjusted_mode.hdisplay;
+ height = state->crtc->state->adjusted_mode.vdisplay;
+
+ priv->framedesc->addr = drm_fb_cma_get_gem_addr(state->fb, state, 0);
+
+ priv->framedesc->cmd = width * height * ((finfo->depth + 7) / 8) / 4;
+ priv->framedesc->cmd |= JZ_LCD_CMD_EOF_IRQ;
+}
+
+static enum drm_connector_status
+ingenic_drm_conn_detect(struct drm_connector *conn, bool force)
+{
+ struct ingenic_drm *priv = drm_conn_get_priv(conn);
+
+ if (priv->panel) {
+ drm_panel_attach(priv->panel, conn);
+
+ return connector_status_connected;
+ }
+
+ return connector_status_disconnected;
+}
+
+static void ingenic_drm_conn_destroy(struct drm_connector *conn)
+{
+ struct ingenic_drm *priv = drm_conn_get_priv(conn);
+
+ if (priv->panel)
+ drm_panel_detach(priv->panel);
+
+ drm_connector_cleanup(conn);
+}
+
+static int ingenic_drm_conn_get_modes(struct drm_connector *conn)
+{
+ struct ingenic_drm *priv = drm_conn_get_priv(conn);
+
+ if (priv->panel)
+ return priv->panel->funcs->get_modes(priv->panel);
+
+ return 0;
+}
+
+static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg)
+{
+ struct drm_device *drm = arg;
+ struct ingenic_drm *priv = drm->dev_private;
+ unsigned int state;
+
+ regmap_read(priv->map, JZ_REG_LCD_STATE, &state);
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_STATE,
+ JZ_LCD_STATE_EOF_IRQ, 0);
+
+ if (state & JZ_LCD_STATE_EOF_IRQ)
+ drm_crtc_handle_vblank(&priv->crtc);
+
+ return IRQ_HANDLED;
+}
+
+static int ingenic_drm_enable_vblank(struct drm_crtc *crtc)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_CTRL,
+ JZ_LCD_CTRL_EOF_IRQ, JZ_LCD_CTRL_EOF_IRQ);
+
+ return 0;
+}
+
+static void ingenic_drm_disable_vblank(struct drm_crtc *crtc)
+{
+ struct ingenic_drm *priv = drm_crtc_get_priv(crtc);
+
+ regmap_update_bits(priv->map, JZ_REG_LCD_CTRL, JZ_LCD_CTRL_EOF_IRQ, 0);
+}
+
+DEFINE_DRM_GEM_CMA_FOPS(ingenic_drm_fops);
+
+static struct drm_driver ingenic_drm_driver_data = {
+ .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME
+ | DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
+ .name = "ingenic-drm",
+ .desc = "DRM module for Ingenic SoCs",
+ .date = "20190228",
+ .major = 1,
+ .minor = 0,
+ .patchlevel = 0,
+
+ .fops = &ingenic_drm_fops,
+
+ .dumb_create = drm_gem_cma_dumb_create,
+ .gem_free_object_unlocked = drm_gem_cma_free_object,
+ .gem_vm_ops = &drm_gem_cma_vm_ops,
+
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+ .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_vmap = drm_gem_cma_prime_vmap,
+ .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+ .gem_prime_mmap = drm_gem_cma_prime_mmap,
+
+ .irq_handler = ingenic_drm_irq_handler,
+};
+
+static const struct drm_plane_funcs ingenic_drm_primary_plane_funcs = {
+ .update_plane = drm_atomic_helper_update_plane,
+ .disable_plane = drm_atomic_helper_disable_plane,
+ .reset = drm_atomic_helper_plane_reset,
+
+ .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static const struct drm_crtc_funcs ingenic_drm_crtc_funcs = {
+ .reset = drm_atomic_helper_crtc_reset,
+ .set_config = drm_atomic_helper_set_config,
+ .page_flip = drm_atomic_helper_page_flip,
+
+ .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+
+ .enable_vblank = ingenic_drm_enable_vblank,
+ .disable_vblank = ingenic_drm_disable_vblank,
+
+ .gamma_set = drm_atomic_helper_legacy_gamma_set,
+};
+
+static const struct drm_connector_funcs ingenic_drm_conn_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = ingenic_drm_conn_detect,
+ .destroy = ingenic_drm_conn_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_plane_helper_funcs ingenic_drm_plane_helper_funcs = {
+ .atomic_update = ingenic_drm_plane_atomic_update,
+ .prepare_fb = drm_gem_fb_prepare_fb,
+};
+
+static const struct drm_crtc_helper_funcs ingenic_drm_crtc_helper_funcs = {
+ .atomic_enable = ingenic_drm_crtc_atomic_enable,
+ .atomic_disable = ingenic_drm_crtc_atomic_disable,
+ .atomic_flush = ingenic_drm_crtc_atomic_flush,
+ .atomic_check = ingenic_drm_crtc_atomic_check,
+};
+
+static const struct drm_connector_helper_funcs ingenic_drm_conn_helper_funcs = {
+ .get_modes = ingenic_drm_conn_get_modes,
+};
+
+static const struct drm_mode_config_funcs ingenic_drm_mode_config_funcs = {
+ .fb_create = drm_gem_fb_create,
+ .output_poll_changed = drm_fb_helper_output_poll_changed,
+ .atomic_check = drm_atomic_helper_check,
+ .atomic_commit = drm_atomic_helper_commit,
+};
+
+static const struct drm_encoder_funcs ingenic_drm_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static int ingenic_drm_probe(struct platform_device *pdev)
+{
+ const struct jz_soc_info *soc_info;
+ struct device *dev = &pdev->dev;
+ struct ingenic_drm *priv;
+ struct clk *parent_clk;
+ struct drm_device *drm;
+ struct resource *mem;
+ void __iomem *base;
+ long parent_rate;
+ int ret, irq;
+
+ soc_info = device_get_match_data(dev);
+ if (!soc_info)
+ return -EINVAL;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = base = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "Failed to get platform irq\n");
+ return -ENOENT;
+ }
+
+ priv->map = devm_regmap_init_mmio(dev, base,
+ &ingenic_drm_regmap_config);
+ if (IS_ERR(priv->map)) {
+ dev_err(dev, "Failed to create regmap\n");
+ return PTR_ERR(priv->map);
+ }
+
+ if (soc_info->needs_dev_clk) {
+ priv->lcd_clk = devm_clk_get(dev, "lcd");
+ if (IS_ERR(priv->lcd_clk)) {
+ dev_err(dev, "Failed to get lcd clock\n");
+ return PTR_ERR(priv->lcd_clk);
+ }
+ }
+
+ priv->pix_clk = devm_clk_get(dev, "lcd_pclk");
+ if (IS_ERR(priv->pix_clk)) {
+ dev_err(dev, "Failed to get pixel clock\n");
+ return PTR_ERR(priv->pix_clk);
+ }
+
+ priv->panel_node = of_parse_phandle(dev->of_node, "ingenic,panel", 0);
+ if (!priv->panel_node) {
+ DRM_INFO("No panel found");
+ } else {
+ priv->panel = of_drm_find_panel(priv->panel_node);
+ of_node_put(priv->panel_node);
+
+ if (IS_ERR(priv->panel)) {
+ if (PTR_ERR(priv->panel) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ priv->panel = NULL;
+ } else {
+ ret = drm_panel_prepare(priv->panel);
+ if (ret && ret != -ENOSYS)
+ return ret;
+ }
+ }
+
+ if (priv->panel) {
+ ret = device_property_read_u32(dev, "ingenic,lcd-mode",
+ &priv->lcd_mode);
+ if (ret) {
+ dev_err(dev, "Unable to read ingenic,lcd-mode property\n");
+ return ret;
+ }
+ }
+
+ priv->framedesc = dma_alloc_coherent(dev, sizeof(*priv->framedesc),
+ &priv->framedesc_phys, GFP_KERNEL);
+ if (!priv->framedesc)
+ return -ENOMEM;
+
+ priv->framedesc->next = priv->framedesc_phys;
+ priv->framedesc->id = 0xdeafbead;
+
+ drm = drm_dev_alloc(&ingenic_drm_driver_data, dev);
+ if (IS_ERR(drm)) {
+ ret = PTR_ERR(drm);
+ goto err_free_dma;
+ }
+
+ priv->drm = drm;
+
+ drm_mode_config_init(drm);
+ drm->mode_config.min_width = 0;
+ drm->mode_config.min_height = 0;
+ drm->mode_config.max_width = 800;
+ drm->mode_config.max_height = 600;
+ drm->mode_config.funcs = &ingenic_drm_mode_config_funcs;
+
+ drm_plane_helper_add(&priv->primary, &ingenic_drm_plane_helper_funcs);
+
+ ret = drm_universal_plane_init(drm, &priv->primary,
+ 0, &ingenic_drm_primary_plane_funcs,
+ ingenic_drm_primary_formats,
+ ARRAY_SIZE(ingenic_drm_primary_formats),
+ NULL, DRM_PLANE_TYPE_PRIMARY, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to register primary plane: %i\n", ret);
+ goto err_unref_drm;
+ }
+
+ drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
+
+ ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->primary,
+ NULL, &ingenic_drm_crtc_funcs, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to init CRTC: %i\n", ret);
+ goto err_cleanup_plane;
+ }
+
+ drm_connector_helper_add(&priv->connector,
+ &ingenic_drm_conn_helper_funcs);
+ ret = drm_connector_init(drm, &priv->connector,
+ &ingenic_drm_conn_funcs,
+ DRM_MODE_CONNECTOR_Unknown);
+ if (ret) {
+ dev_err(dev, "Failed to init connector: %i\n", ret);
+ goto err_cleanup_crtc;
+ }
+
+ priv->encoder.possible_crtcs = 1;
+
+ ret = drm_encoder_init(drm, &priv->encoder, &ingenic_drm_encoder_funcs,
+ DRM_MODE_ENCODER_NONE, NULL);
+ if (ret) {
+ dev_err(dev, "Failed to init encoder: %i\n", ret);
+ goto err_cleanup_connector;
+ }
+
+ drm_connector_attach_encoder(&priv->connector, &priv->encoder);
+
+ platform_set_drvdata(pdev, drm);
+ priv->drm = drm;
+ drm->dev_private = priv;
+
+ ret = drm_irq_install(drm, irq);
+ if (ret) {
+ dev_err(dev, "Unable to install IRQ handler\n");
+ goto err_cleanup_encoder;
+ }
+
+ ret = drm_vblank_init(drm, 1);
+ if (ret) {
+ dev_err(dev, "Failed calling drm_vblank_init()\n");
+ goto err_uninstall_irq;
+ }
+
+ drm_mode_config_reset(drm);
+
+ ret = clk_prepare_enable(priv->pix_clk);
+ if (ret) {
+ dev_err(dev, "Unable to start pixel clock\n");
+ goto err_cleanup_vblank;
+ }
+
+ if (priv->lcd_clk) {
+ parent_clk = clk_get_parent(priv->lcd_clk);
+ parent_rate = clk_get_rate(parent_clk);
+
+ /* LCD Device clock must be 3x the pixel clock for STN panels,
+ * or 1.5x the pixel clock for TFT panels. To avoid having to
+ * check for the LCD device clock everytime we do a mode change,
+ * we set the LCD device clock to the highest rate possible.
+ */
+ ret = clk_set_rate(priv->lcd_clk, parent_rate);
+ if (ret) {
+ dev_err(dev, "Unable to set LCD clock rate\n");
+ goto err_pixclk_disable;
+ }
+
+ ret = clk_prepare_enable(priv->lcd_clk);
+ if (ret) {
+ dev_err(dev, "Unable to start lcd clock\n");
+ goto err_pixclk_disable;
+ }
+ }
+
+ ret = drm_fbdev_generic_setup(drm, 16);
+ if (ret) {
+ dev_err(dev, "Failed to init fbdev\n");
+ goto err_devclk_disable;
+ }
+
+ ret = drm_dev_register(drm, 0);
+ if (ret) {
+ dev_err(dev, "Failed to register DRM driver\n");
+ goto err_cleanup_fbdev;
+ }
+
+ return 0;
+
+err_cleanup_fbdev:
+ drm_mode_config_cleanup(drm);
+err_devclk_disable:
+ if (priv->lcd_clk)
+ clk_disable_unprepare(priv->lcd_clk);
+err_pixclk_disable:
+ clk_disable_unprepare(priv->pix_clk);
+err_cleanup_vblank:
+ drm_vblank_cleanup(drm);
+err_uninstall_irq:
+ drm_irq_uninstall(drm);
+err_cleanup_encoder:
+ drm_encoder_cleanup(&priv->encoder);
+err_cleanup_connector:
+ drm_connector_cleanup(&priv->connector);
+err_cleanup_crtc:
+ drm_crtc_cleanup(&priv->crtc);
+err_cleanup_plane:
+ drm_plane_cleanup(&priv->primary);
+err_unref_drm:
+ drm_dev_put(drm);
+err_free_dma:
+ dma_free_coherent(dev, sizeof(*priv->framedesc),
+ priv->framedesc, priv->framedesc_phys);
+ return ret;
+}
+
+static int ingenic_drm_remove(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+ struct ingenic_drm *priv = drm->dev_private;
+
+ drm_dev_unregister(drm);
+ drm_mode_config_cleanup(drm);
+
+ if (priv->lcd_clk)
+ clk_disable_unprepare(priv->lcd_clk);
+ clk_disable_unprepare(priv->pix_clk);
+
+ drm_vblank_cleanup(drm);
+ drm_irq_uninstall(drm);
+
+ drm_encoder_cleanup(&priv->encoder);
+ drm_connector_cleanup(&priv->connector);
+ drm_crtc_cleanup(&priv->crtc);
+ drm_plane_cleanup(&priv->primary);
+
+ drm_dev_put(drm);
+
+ dma_free_coherent(&pdev->dev, sizeof(*priv->framedesc),
+ priv->framedesc, priv->framedesc_phys);
+
+ return 0;
+}
+
+static const struct jz_soc_info jz4740_soc_info = {
+ .needs_dev_clk = true,
+};
+
+static const struct jz_soc_info jz4725b_soc_info = {
+ .needs_dev_clk = false,
+};
+
+static const struct of_device_id ingenic_drm_of_match[] = {
+ { .compatible = "ingenic,jz4740-drm", .data = &jz4740_soc_info },
+ { .compatible = "ingenic,jz4725b-drm", .data = &jz4725b_soc_info },
+ {},
+};
+
+static struct platform_driver ingenic_drm_driver = {
+ .driver = {
+ .name = "ingenic-drm",
+ .of_match_table = of_match_ptr(ingenic_drm_of_match),
+ },
+ .probe = ingenic_drm_probe,
+ .remove = ingenic_drm_remove,
+};
+module_platform_driver(ingenic_drm_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("DRM driver for the Ingenic SoCs\n");
+MODULE_LICENSE("GPL v2");
--
2.11.0


--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch