RE: [PATCH 1/5] EDAC/amd64: Add Fam17hMod30h PCI IDs

From: Ghannam, Yazen
Date: Tue Feb 26 2019 - 10:08:02 EST


> -----Original Message-----
> From: linux-edac-owner@xxxxxxxxxxxxxxx <linux-edac-owner@xxxxxxxxxxxxxxx> On Behalf Of Borislav Petkov
> Sent: Tuesday, February 26, 2019 4:41 AM
> To: Ghannam, Yazen <Yazen.Ghannam@xxxxxxx>
> Cc: linux-edac@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 1/5] EDAC/amd64: Add Fam17hMod30h PCI IDs
>
> Just nitpicks:
>
> On Tue, Feb 19, 2019 at 08:25:51PM +0000, Ghannam, Yazen wrote:
>
> > Subject: Re: [PATCH 1/5] EDAC/amd64: Add Fam17hMod30h PCI IDs
>
> Write that "Fam17hMod30h" in a human readable form pls. Especially in
> the subject: "family 0x17, models 0x30..."
>

Will do.

> > From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
> >
> > Add the new Family 17h Model 30h PCI IDs to the AMD64 EDAC module.
> >
> > This also fixes a probe failure that appeared when some other PCI IDs
> > for Fam17hMod30h were added to the AMD NB code.
> >
> > Fixes: be3518a16ef2 (x86/amd_nb: Add PCI device IDs for family 17h, model 30h)
> > Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
> > ---
> > drivers/edac/amd64_edac.c | 15 ++++++++++++++-
> > drivers/edac/amd64_edac.h | 3 +++
> > 2 files changed, 17 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
> > index 6ea98575a402..9947437d9574 100644
> > --- a/drivers/edac/amd64_edac.c
> > +++ b/drivers/edac/amd64_edac.c
> > @@ -2211,6 +2211,15 @@ static struct amd64_family_type family_types[] = {
> > .dbam_to_cs = f17_base_addr_to_cs_size,
> > }
> > },
> > + [F17_M30H_CPUS] = {
> > + .ctl_name = "F17h_M30h",
> > + .f0_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F0,
> > + .f6_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F6,
> > + .ops = {
> > + .early_channel_count = f17_early_channel_count,
> > + .dbam_to_cs = f17_base_addr_to_cs_size,
> > + }
> > + },
> > };
> >
> > /*
> > @@ -3199,7 +3208,11 @@ static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt)
> > break;
> >
> > case 0x17:
> > - if (pvt->model >= 0x10 && pvt->model <= 0x2f) {
> > + if (pvt->model >= 0x30 && pvt->model <= 0x3f) {
> > + fam_type = &family_types[F17_M30H_CPUS];
> > + pvt->ops = &family_types[F17_M30H_CPUS].ops;
> > + break;
> > + } else if (pvt->model >= 0x10 && pvt->model <= 0x2f) {
>
> Sort the checks in increasing models so that it is easier to follow.
>

Okay, will do.

Thanks,
Yazen