Re: [PATCH v2 3/9] serial: core: add rs485-rts-delay-us devicetree property for RS485

[Rob Herring]

On Thu, Feb 21, 2019 at 06:17:52PM +0100, Martin Kepplinger wrote:
> struct serial_rs485 now optionally holds the rts delay values in
> microseconds. Users can set these delays in their devicetree descriptions,
> so this adds the microseconds-option with the "rs485-rts-delay-us" boolean
> property.

If it has a value, it's not boolean.

Should the old prop be deprecated?

> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/serial/rs485.txt |  1 +
>  drivers/tty/serial/serial_core.c                   | 11 +++++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
> index b92592dff6dd..77396c62b383 100644
> --- a/Documentation/devicetree/bindings/serial/rs485.txt
> +++ b/Documentation/devicetree/bindings/serial/rs485.txt
> @@ -12,6 +12,7 @@ Optional properties:
>    * b is the delay between end of data sent and rts signal in milliseconds
>        it corresponds to the delay after sending data and actual release of the line.
>    If this property is not specified, <0 0> is assumed.
> +- rs485-rts-delay-us: the same as rs485-rts-delay, but in microseconds.
>  - rs485-rts-active-low: drive RTS low when sending (default is high).
>  - linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
>    feature at boot time. It can be disabled later with proper ioctl.