[PATCH net-next v2 7/7] net: phy: marvell10g: add support for the 88x2110 PHY

From: Maxime Chevallier
Date: Fri Feb 22 2019 - 18:38:31 EST


This patch adds support for the 88x2110 PHY, which is similar to the
already supported 88x3310 PHY without the SFP interface.

It supports 10/100/1000BASET along with 2.5GBASET, 5GBASET and 10GBASET,
with the same interface modes that are used by the 3310.

This PHY don't have the same issue as the 88x3310 regarding 2.5/5G
abilities, and correctly follows the 802.3bz standard to list the
supported abilities.

Signed-off-by: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
Suggested-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxx>
---
drivers/net/phy/marvell10g.c | 13 +++++++++++++
include/linux/marvell_phy.h | 1 +
2 files changed, 14 insertions(+)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 8f354c3f3876..580e91deadbc 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -478,12 +478,25 @@ static struct phy_driver mv3310_drivers[] = {
.aneg_done = mv3310_aneg_done,
.read_status = mv3310_read_status,
},
+ {
+ .phy_id = MARVELL_PHY_ID_88E2110,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .name = "mv88x2110",
+ .features = PHY_10GBIT_FEATURES,
+ .probe = mv3310_probe,
+ .soft_reset = gen10g_no_soft_reset,
+ .config_init = mv3310_config_init,
+ .config_aneg = mv3310_config_aneg,
+ .aneg_done = mv3310_aneg_done,
+ .read_status = mv3310_read_status,
+ },
};

module_phy_driver(mv3310_drivers);

static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
+ { MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
{ },
};
MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 70c17345e118..73d04743a2bb 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -21,6 +21,7 @@
#define MARVELL_PHY_ID_88E1545 0x01410ea0
#define MARVELL_PHY_ID_88E3016 0x01410e60
#define MARVELL_PHY_ID_88X3310 0x002b09a0
+#define MARVELL_PHY_ID_88E2110 0x002b09b0

/* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
* not have a model ID. So the switch driver traps reads to the ID2
--
2.19.2