Re: [PATCH v2 07/10] usb: dwc3: Registering a role switch in the DRD code.

[Chen Yu]

Hi,

On 2019/2/19 1:30, Valentin Schneider wrote:
> Hi,
> 
> On 18/02/2019 11:23, Yu Chen wrote:
> [...]
>> @@ -522,6 +556,15 @@ int dwc3_drd_init(struct dwc3 *dwc)
>>  		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
>>  	}
>>  
>> +	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
>> +	dwc3_role_switch.set = dwc3_usb_role_switch_set;
>> +	dwc3_role_switch.get = dwc3_usb_role_switch_get;
>> +	dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
> 
> Building arm64 defconfig gives me this:
> 
> drivers/usb/dwc3/drd.o: In function `dwc3_drd_exit':
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604:(.text+0x814): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604: undefined reference to `usb_role_switch_unregister'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:604:(.text+0x844): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_unregister'
> drivers/usb/dwc3/drd.o: In function `dwc3_drd_init':
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562: undefined reference to `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562:(.text+0xa20): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562: undefined reference to `usb_role_switch_register'
> /home/valsch01/Work/kernel/drivers/usb/dwc3/drd.c:562:(.text+0xb4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `usb_role_switch_register'
> Makefile:1024: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
> 
> This has CONFIG_USB_ROLE_SWITCH=m, setting it as a built-in makes the thing
> linkable.
> 
> I suppose that's because defconfig gives us
> 
>   CONFIG_USB_DWC3_DUAL_ROLE=y
> 
> but then that should probably force a CONFIG_USB_ROLE_SWITCH=y. My
> immediate reaction to this would be to add:
> 
> ---
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 2b1494460d0c..661b1d2efc8b 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -44,6 +44,7 @@ config USB_DWC3_DUAL_ROLE
>  	bool "Dual Role mode"
>  	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
>  	depends on (EXTCON=y || EXTCON=USB_DWC3)
> +	select USB_ROLE_SWITCH
>  	help
>  	  This is the default mode of working of DWC3 controller where
>  	  both host and gadget features are enabled.
> ---
>   
> Not sure how acceptable that is though.
> 
Thanks for your notice! I will add this in next version.

> 
>> +	if (ret) {
>> +		dwc3_drd_exit(dwc);
>> +		return PTR_ERR(dwc->role_sw);
>> +	}
>> +
>>  	return 0;
>>  }
>>  
>> @@ -557,4 +600,6 @@ void dwc3_drd_exit(struct dwc3 *dwc)
>>  
>>  	if (!dwc->edev)
>>  		free_irq(dwc->otg_irq, dwc);
>> +
>> +	usb_role_switch_unregister(dwc->role_sw);
>>  }
>>
> 
> .
> 

Thanks
Yu Chen