Re: [EXT] Re: [PATCH net-next 10/13] net: mvpp2: reset the XPCS while reconfiguring the serdes lanes

[Russell King - ARM Linux admin]

Hi Stefan,

On Mon, Feb 18, 2019 at 11:08:34AM +0000, Stefan Chulski wrote:
> HW recommendation upon Serdes reconfiguration are the following:
> 
> 1. Disable port(CTRL0_REG - in XLG/GMAC) 
> 2. Put port in reset (both XLG/GMAC)
> 3. For KR - put in reset MPCS (MAC control clock, RX SD clock, TX SD clock), XPSC is RXAUI/XAUI clock domain
> 4. Power down Serdes lane
> 
> Do reconfiguration of Serdes.
> 
> 5. Enable Serdes lane
> 6. Disable MPCS reset for KR
> 7. Disable port reset (both XLG/GMAC)
> 8. Enable port  (both XLG/GMAC)

For clarity, presumably either the XLG or the GMAC should be released
from reset and enabled at any one time depending on the configured mode,
but never both together?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up