Re: [PATCH] arm64: dts: qcs404: evb: Fix voltages for s5 and l3
From: Mark Brown
Date: Mon Feb 04 2019 - 15:59:38 EST
On Mon, Feb 04, 2019 at 11:25:10AM -0800, Bjorn Andersson wrote:
> On Mon 04 Feb 10:23 PST 2019, Mark Brown wrote:
> > On Mon, Feb 04, 2019 at 08:03:37AM -0800, Bjorn Andersson wrote:
> Okay, I don't see a big problem with expecting the DT to only contain
> values that the hardware can actually do. I do however see that
> machine_constraints_voltage() has been changes to expect the driver to
> return -ENOTRECOVERABLE when we don't have a way to query the voltage
> during probe.
> So there's a risk of this breaking compatibility with older dtb files on
> other boards. We will have to do some more verification on this.
That's basically only going to affect Qualcomm hardware FWIW, I had
thought that such devices didn't manage to probe with upstream before
that change either but I could be misremembering.
> > > regulator framework be made to round down to the previous valid step
> > > instead of up?
> > We definitely don't want to round voltages down, it is vastly more
> > common for devices to experience problems like brownouts if they go
> > under voltage so it'd be more likely to cause harm than good.
> We're 2mV off in this case, but it could have been way off. So I'm good
> with this position.
Never mind that that's 2mV assuming the regulator has perfect accuracy
and there's headroom. For something like this it's likely not a problem
but some high current things (especially CPUs or anything like that) are
operating on thin margins.
Attachment:
signature.asc
Description: PGP signature