Re: [v2] arm64: dts: lx2160a: add sata node support

[Shawn Guo]

On Mon, Jan 14, 2019 at 09:55:00AM +0000, Peng Ma wrote:
> Add sata node support and Enable sata support

I would suggest you reword the commit log like below:

Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB
boards.

> 
> Signed-off-by: Peng Ma <peng.ma@xxxxxxx>
> ---
> changed for V2:
> 	- put the 'status' at the end of property list
> 	- add lx2160aqds sata support
> 
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
>  arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
>  arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
>  3 files changed, 76 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> index 99a22ab..0289955 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
> @@ -110,3 +110,19 @@
>  &usb1 {
>  	status = "okay";
>  };
> +
> +&sata0 {

Please sort the labeling nodes alphabetically.

Shawn

> +	status = "okay";
> +};
> +
> +&sata1 {
> +	status = "okay";
> +};
> +
> +&sata2 {
> +	status = "okay";
> +};
> +
> +&sata3 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> index 6481e5f..aacca27 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
> @@ -117,3 +117,19 @@
>  &usb1 {
>  	status = "okay";
>  };
> +
> +&sata0 {
> +	status = "okay";
> +};
> +
> +&sata1 {
> +	status = "okay";
> +};
> +
> +&sata2 {
> +	status = "okay";
> +};
> +
> +&sata3 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> index a79f5c1..4390aea 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
> @@ -762,5 +762,49 @@
>  				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>  			dma-coherent;
>  		};
> +
> +		sata0: sata@3200000 {

Please sort nodes with unit-address in order of the address.

Shawn

> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3200000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata1: sata@3210000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3210000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata2: sata@3220000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3220000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
> +
> +		sata3: sata@3230000 {
> +			compatible = "fsl,lx2160a-ahci";
> +			reg = <0x0 0x3230000 0x0 0x10000>,
> +			      <0x7 0x100520 0x0 0x4>;
> +			reg-names = "ahci", "sata-ecc";
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 3>;
> +			dma-coherent;
> +			status = "disabled";
> +		};
>  	};
>  };
> -- 
> 1.7.1
>