Re: [PATCH v4 10/14] arm64: dts: qcom: pm8005: add interrupt controller properties

[Bjorn Andersson]

On Sun 13 Jan 07:47 PST 2019, Brian Masney wrote:

> Add interrupt controller properties now that spmi-gpio is a proper
> hierarchical IRQ chip. The interrupts property is no longer needed so
> remove it.
> 
> This change was not tested on any hardware but the same change was
> tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
> no issues.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
> ---
> This is a new patch introduced in V4.
> 
>  arch/arm64/boot/dts/qcom/pm8005.dtsi | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> index 4d5aca3eeb69..c0ddf128136c 100644
> --- a/arch/arm64/boot/dts/qcom/pm8005.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
> @@ -16,10 +16,8 @@
>  			reg = <0xc000>;
>  			gpio-controller;
>  			#gpio-cells = <2>;
> -			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
> -				     <0 0xc1 0 IRQ_TYPE_NONE>,
> -				     <0 0xc2 0 IRQ_TYPE_NONE>,
> -				     <0 0xc3 0 IRQ_TYPE_NONE>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
>  		};
>  
>  	};
> -- 
> 2.17.2
>