[PATCH] USB: serial: cp210x: Fix GPIO in autosuspend

From: Karoly Pados
Date: Mon Jan 14 2019 - 14:44:06 EST


Current GPIO code in cp210x fails to take USB autosuspend into account,
making it practically impossible to use GPIOs with autosuspend enabled
without user configuration. Fix this like for ftdi_sio in a previous patch.
Tested on a CP2102N.

Signed-off-by: Karoly Pados <pados@xxxxxxxx>
---
drivers/usb/serial/cp210x.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index c0777a374a88..8f974eabce63 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -598,9 +598,15 @@ static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
void *dmabuf;
int result;

+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
dmabuf = kmalloc(bufsize, GFP_KERNEL);
- if (!dmabuf)
+ if (!dmabuf) {
+ usb_autopm_put_interface(serial->interface);
return -ENOMEM;
+ }

result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
CP210X_VENDOR_SPECIFIC, type, val,
@@ -618,6 +624,7 @@ static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
}

kfree(dmabuf);
+ usb_autopm_put_interface(serial->interface);

return result;
}
@@ -702,9 +709,15 @@ static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
void *dmabuf;
int result;

+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
- if (!dmabuf)
+ if (!dmabuf) {
+ usb_autopm_put_interface(serial->interface);
return -ENOMEM;
+ }

result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
CP210X_VENDOR_SPECIFIC, type, val,
@@ -712,6 +725,7 @@ static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
USB_CTRL_SET_TIMEOUT);

kfree(dmabuf);
+ usb_autopm_put_interface(serial->interface);

if (result == bufsize) {
result = 0;
@@ -1383,6 +1397,7 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
} else {
u16 wIndex = buf.state << 8 | buf.mask;

+ usb_autopm_get_interface(serial->interface);
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
CP210X_VENDOR_SPECIFIC,
@@ -1390,6 +1405,7 @@ static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
CP210X_WRITE_LATCH,
wIndex,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+ usb_autopm_put_interface(serial->interface);
}

if (result < 0) {
--
2.20.1