[PATCH v1 10/10] cpufreq: scpi: Use auto-registration of thermal cooling device

From: Amit Kucheria
Date: Mon Jan 14 2019 - 11:43:33 EST


Use the CPUFREQ_AUTO_REGISTER_COOLING_DEV flag to allow cpufreq core to
automatically register as a thermal cooling device.

This allows removal of boiler plate code from the driver.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
drivers/cpufreq/scpi-cpufreq.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index 87a98ec77773..c01c63a342c9 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -22,7 +22,6 @@
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/of_platform.h>
@@ -34,7 +33,6 @@
struct scpi_data {
struct clk *clk;
struct device *cpu_dev;
- struct thermal_cooling_device *cdev;
};

static struct scpi_ops *scpi_ops;
@@ -186,7 +184,6 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
{
struct scpi_data *priv = policy->driver_data;

- cpufreq_cooling_unregister(priv->cdev);
clk_put(priv->clk);
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
kfree(priv);
@@ -195,23 +192,16 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
return 0;
}

-static void scpi_cpufreq_ready(struct cpufreq_policy *policy)
-{
- struct scpi_data *priv = policy->driver_data;
-
- priv->cdev = of_cpufreq_cooling_register(policy);
-}
-
static struct cpufreq_driver scpi_cpufreq_driver = {
.name = "scpi-cpufreq",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
- CPUFREQ_NEED_INITIAL_FREQ_CHECK,
+ CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+ CPUFREQ_AUTO_REGISTER_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,
.attr = cpufreq_generic_attr,
.get = scpi_cpufreq_get_rate,
.init = scpi_cpufreq_init,
.exit = scpi_cpufreq_exit,
- .ready = scpi_cpufreq_ready,
.target_index = scpi_cpufreq_set_target,
};

--
2.17.1