Aw: Re: [PATCH] net: ethernet: mediatek: fix warning in phy_start_aneg

[Frank Wunderlich]

> In mtk_phy_connect() I would say this complete block can be removed.
> All this is handled internally by phylib.
> 
> 	dev->phydev->autoneg = AUTONEG_ENABLE;
> 	dev->phydev->speed = 0;
> 	dev->phydev->duplex = 0;
> 
> 	phy_set_max_speed(dev->phydev, SPEED_1000);
> 	phy_support_asym_pause(dev->phydev);
> 	linkmode_copy(dev->phydev->advertising, dev->phydev->supported);
> 	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
> 			 dev->phydev->advertising);
> 	phy_start_aneg(dev->phydev);
> 
> Could you please test this?

seems to work well, no warning in dmesg

traffic 940Mbit sending, 900 receive

> And a further proposal:
> Instead of the open-coded dev_info() in mtk_phy_connect_node()
> you could use phy_attached_info().

have not tried this yet...because it's only an info-message and needs different parameters...have to look how i can convert it 

> Calling phy_start() in the ndo_open callback is fine, you can leave
> it there.

have it re-added

pushed to my repo: https://github.com/frank-w/BPI-R2-4.14/commits/5.0-rc

regards Frank